GitLab

Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: If1d7ef1ad3ac3dfc860f949392c7534ce8d206e3

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I9833a54d0938d70886ac88b1922b17edf1dee8e0

Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I8523f1370312ed22ff7ca710cd916be52f725e3c

BIT24 of IPI command header is used to determine if caller is
secure or non-secure.

Mark BIT24 of IPI command header as non-secure if SMC caller
is non-secure.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: Iec25af8f4b202093f58e858ee47cd9cd46890267

FF-A specification states that error codes should be typed int32_t.
SPMD's uses uint64_t for return values, which if assigned with a signed
type would have sign extension, and change the size of the return from
32-bit to 64-bit.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I288ab2ffec8330a2fe1f21df14e22c34bd83ced3

Merge "Bug fix in tspd interrupt handling when TSP_NS_INTR_ASYNC_PREEMPT is enabled" into integration

Typically, interrupts for a specific security state get handled in the
same security execption level if the execution is in the same security
state. For example, if a non-secure interrupt gets fired when CPU is
executing in NS-EL2 it gets handled in the non-secure world.

However, interrupts belonging to the opposite security state typically
demand a world(context) switch. This is inline with the security
principle which states a secure interrupt has to be handled in the
secure world. Hence, the TSPD in EL3 expects the context(handle) for a
secure interrupt to be non-secure and vice versa.

The function "tspd_sel1_interrupt_handler" is the handler registered
for S-EL1 interrupts by the TSPD. Based on the above assumption, it
provides an assertion to validate if the interrupt originated from
non-secure world and upon success arranges entry into the TSP at
'tsp_sel1_intr_entry' for handling the interrupt.

However, a race condition between non-secure and secure interrupts can
lead to a scenario where the above assumptions do not hold true and
further leading to following assert fail.

This patch fixes the bug which causes this assert fail:

	ASSERT: services/spd/tspd/tspd_main.c:105
	BACKTRACE: START: assert
	0: EL3: 0x400c128
	1: EL3: 0x400faf8
	2: EL3: 0x40099a4
	3: EL3: 0x4010d54
	BACKTRACE: END: assert

Change-Id: I359d30fb5dbb1429a4a3c3fff37fdc64c07e9414
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

The UEFI specification details the represenatation
for the EFI_GUID type. Add this representation to the
uuid_helper_t union type so that GUID definitions
can be shared verbatim between UEFI and TF-A header
files.

Change-Id: Ie44ac141f70dd0025e186581d26dce1c1c29fce6
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>

1.Since in mmc_init, the most of mmc_device_info passed in are temporary variables.
  In order to avoid referencing the released space on the stack when maybe MISUSED,
  it`s better to use global variables to store mmc_device_info in mmc.c
2.Delete redundant;

Signed-off-by: deqi.hu@siengine.com
Change-Id: I51ae90e7f878b19b4963508b3f7ec66339015ebc

* changes:
  SPM: declare third cactus instance as UP SP
  SPMD: lock the g_spmd_pm structure
  FF-A: implement FFA_SECONDARY_EP_REGISTER

Versal is a72 based that's why there is no reason to build low level
assemble code for a53.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Iff9cf2582102d951825b87fd9af18e831ca717d6

* changes:
  plat: tc0: add matterhorn_elp_arm library to tc0
  cpus: add Matterhorn ELP ARM cpu library

The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0

Add a lock and spin lock/unlock calls when accessing the fields of the
SPMD PM structure.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9bab705564dc1ba003c29512b1f9be5f126fbb0d

Remove the former impdef SPMD service for SPMC entry point
registration. Replace with FFA_SECONDARY_EP_REGISTER ABI
providing a single entry point address into the SPMC for
primary and secondary cold boot.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I067adeec25fc12cdae90c15a616903b4ac4d4d83

* changes:
  plat/arm: Remove ARM_LINUX_KERNEL_AS_BL33 relying on RESET_TO_BL31
  plat/arm: Always allow ARM_LINUX_KERNEL_AS_BL33

Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Ie199c60553477c43d1665548ae78cdfd1aa7ffcf

Change-Id: Ie1acde619a5b21e09717c0e80befb6d53fd16607
Signed-off-by: Usama Arif <usama.arif@arm.com>

* changes:
  qemu/qemu_sbsa: fix memory type of secure NOR flash
  qemu/qemu_sbsa: spm_mm supports 512 cores

Compiling BL31 for the Rockchip platform now produces a message about
the deprecation of gic_common.c.
Follow the advice and use include gicv2.mk instead.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I396b977d57975dba27cfed801ad5264bbbde2b5e

When bit 20 of TZC400 Fail control register [1] is set to 1, it means
Privileged access, the macros FAIL_CONTROL_PRIV_PRIV and
FAIL_CONTROL_PRIV_UNPRIV are then updated to reflect this.

 [1] https://developer.arm.com/documentation/ddi0504/c/programmers-model/register-descriptions/fail-control-register?lang=en



Change-Id: I01e522fded5cf66c9827293ddcf543c79f9e509e
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The case for value "VCOREFS_SMC_CMD_INIT" is not
terminated by a "break" statement.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I56cc7c1648e101c0da6e77e592e6edbd5d37724e

when updata routing of an SDEI event, if the registration flags
is SDEI_REGF_RM_PE, need to updata the affinity of shared event.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Change-Id: Ie5d7cc4199253f6af1c28b407f712caac3092d06

* changes:
  drivers/gicv3: also shift eSPI register offset in GICD_OFFSET_64()
  drivers/gicv3: add debug log for maximum INTID of SPI and eSPI
  drivers/gicv3: limit SPI ID to avoid misjudgement in GICD_OFFSET()
  drivers/gicv3: fix logical issue for num_eints
  drivers/gicv3: fix potential GICD context override with ESPI enabled
  drivers/gicv3: use mpidr to probe GICR for current CPU

Make the aarch64's el3_panic() function print a newline character after
PC address, otherwise the output can get mangled in one line with output
from other firmware. Here is an example of how the output of el3_panic()
got mangled with Linux' console output:

    ERROR:   Unhandled External Abort received on 0x80000001 at EL3!
    ERROR:    exception reason=1 syndrome=0x92000210
    PANIC at PC : 0x0000000004027400[13438.473133] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
    [13438.479255] rcu:     1-...0: (4 ticks this GP) idle=35e/1/0x4000000000000000 softirq=146459/146459 fqs=2625

The aarch32 version of this function already does this.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I9f0d032c6cd1e2be7a1837f9c8e8244d30633993

* changes:
  mediatek: mt8192: Add Vcore DVFS driver
  mediatek: mt8192: Add SPM suspend driver
  mediatek: mt8192: supports mcusys off when system suspend
  mediatek: mt8192: Add lpm driver