GitLab

The current BL33 size is large enough for U-Boot, but we need to
increase the limit to use other boot loaders such as edk2.

Increase the buffer size used for GZIP decompression too.

 BL33 max size (UNIPHIER_BL33_MAX_SIZE):  1MB -> 8MB
 GZIP buffer (UNIPHIER_IMAGE_BUF_SIZE):   1MB -> 8MB

Increasing the block buffer size (UNIPHIER_BLOCK_BUF_SIZE) is not
required, but I increased it too to make it work more efficiently.

Change-Id: I4fa6d795bed9ab9ada7f8f616c7d47076139e3a8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the ROM region is needlessly too large.

The on-chip SRAM region of the next SoC will start from 0x04000000,
and this will cause the region overlap.

Mapping 0x04000000 for the ROM is enough.

Change-Id: I85ce0bb1120ebff2e3bc7fd13dc0fd15dfff5ff6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The on-chip SRAM region will be changed in the next SoC. Make it
configurable. Also, split the mmap code into a new helper function
so that it can be re-used for another boot mode.

Change-Id: I89f40432bf852a58ebc9be5d9dec4136b8dc010b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The next SoC does not support the NAND controller, but make the base
address configurable for consistency and future proof.

Change-Id: I776e43ff2b0408577919b0b72849c3e1e5ce0758
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The next SoC supports the same eMMC controller, but the register
base will be changed. Make it configurable.

Change-Id: I00cb5531bc3d8d49357ad5e922cdd3d785355edf
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This platform supports multiple SoCs. The next SoC will still keep
quite similar architecture, but the memory base will be changed.

The ENABLE_PIE improves the maintainability and usability. You can reuse
a single set of BL images for other SoC/board without re-compiling TF-A
at all. This will also keep the code cleaner because it avoids #ifdef
around various base addresses.

By defining ENABLE_PIE, BL2_AT_EL3, BL31, and BL32 (TSP) are really
position-independent now. You can load them anywhere irrespective of
their link address.

Change-Id: I8d5e3124ee30012f5b3bfa278b0baff8efd2fff7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the .buffer field in io_block_dev_spec is statically set,
which is not handy for PIE.

Towards the goal of making this really position-independent, set the
buffer length and length in the uniphier_io_block_setup() function.

Change-Id: I22b20d7b58d6ffd38f64f967a2820fca4bd7dade
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, uniphier_bl2_mmap hard-codes the memory region needed for
loading other images.

Towards the goal of making this really position-independent, call
mmap_add_dynamic_region() before that region gets accessed.

Change-Id: Ieb505b91ccf2483e5f1a280accda564b33f19f11
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Fix the typo "warn" -> "warm".

Also fix the following checkpatch.pl warnings:

  CHECK: Prefer using the BIT macro
  CHECK: No space is necessary after a cast
  CHECK: Alignment should match open parenthesis
  CHECK: Unnecessary parentheses around uniphier_io_policies[image_id].dev_handle

Change-Id: Ic11eea2668c4bf2d1e8f089e6338ba7b7156d80b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Skipping SCP_BL2 image is just a temporary workaround. If on-chip SCP
needs to work, BL2 should load the SCP_BL2 image.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Looks like this is requirement in the pre-merge static analysis.

misra_violation: [Required] MISRA C-2012 Rule 7.2 violation:
Unsigned constants must be declared with U or u suffix.

Adding ULL as requested.  I used ULL() macros for BL*_{BASE,LIMIT}
because they are referenced from linker scripts.
Requested-by: David Cunado <david.cunado@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the xlat region of the on-chip SRAM is always allocated
for all BL images.

The access to the on-chip SRAM is necessary for loading images from
a USB memory device (i.e. when updating firmware), so unneeded for
the usual boot procedure.

To avoid this waste, allocate the xlat region dynamically only for
BL2, and only when it is necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Initial commit for Socionext UniPhier SoC support.  BL1, Bl2, and
BL31 are supported.  Refer to docs/plat/socionext-uniphier.md for
more detais.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>