Skip to content

GitLab

Switch branch/tag
  1. 16 Apr, 2020 1 commit
  3. 15 Apr, 2020 2 commits
  5. 07 Apr, 2020 1 commit
  7. 06 Apr, 2020 1 commit
  9. 03 Apr, 2020 1 commit
  11. 01 Apr, 2020 3 commits
  13. 31 Mar, 2020 2 commits
  15. 30 Mar, 2020 1 commit
    • Alexei Fedorov's avatar
      TF-A GICv3 driver: Introduce makefile · a6ea06f5
      Alexei Fedorov authored 
      

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      a6ea06f5
  17. 27 Mar, 2020 1 commit
  19. 26 Mar, 2020 3 commits
  21. 23 Mar, 2020 1 commit
  23. 20 Mar, 2020 1 commit
  25. 17 Mar, 2020 2 commits
  27. 16 Mar, 2020 1 commit
    • Louis Mayencourt's avatar
      fconf: Clean Arm IO · a6de824f
      Louis Mayencourt authored 
      

Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
removes the duplicate io_policies and functions definition.

This patch:
- replace arm_io_storage.c with the content of arm_fconf_io_storage.c
- rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
- use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
- propagate DEFINES when parsing dts.
- use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
- set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
  of fvp stays the same as it was before the introduction of fconf.

Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
      a6de824f
  29. 14 Mar, 2020 1 commit
  31. 12 Mar, 2020 3 commits
    • Sandrine Bailleux's avatar
      Mention COT build option in trusted-board-boot-build.rst · d935b951
      Sandrine Bailleux authored 
      Since commit 3bff910d

 ("Introduce COT
build option"), it is now possible to select a different Chain of Trust
than the TBBR-Client one.

Make a few adjustments in the documentation to reflect that. Also make
some minor improvements (fixing typos, better formatting, ...)  along
the way.

Change-Id: I3bbadc441557e1e13311b6fd053fdab6b10b1ba2
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      d935b951
    • Sandrine Bailleux's avatar
      Update cryptographic algorithms in TBBR doc · 316c5cc6
      Sandrine Bailleux authored 
      

The TBBR documentation has been written along with an early
implementation of the code. At that time, the range of supported
encryption and hash algorithms was failry limited. Since then, support
for other algorithms has been added in TF-A but the documentation has
not been updated.

Instead of listing them all, which would clutter this document while
still leaving it at risk of going stale in the future, remove specific
references to the original algorithms and point the reader at the
relevant comprehensive document for further details.

Change-Id: I29dc50bc1d53b728091a1fbaa1c3970fb999f7d5
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      316c5cc6
    • Chris Kay's avatar
      juno/sgm: Maximize space allocated to SCP_BL2 · ddc93cba
      Chris Kay authored 
      

To accommodate the increasing size of the SCP_BL2 binary, the base
address of the memory region allocated to SCP_BL2 has been moved
downwards from its current (mostly) arbitrary address to the beginning
of the non-shared trusted SRAM.

Change-Id: I086a3765bf3ea88f45525223d765dc0dbad6b434
Signed-off-by: default avatarChris Kay <chris.kay@arm.com>
      ddc93cba
  33. 11 Mar, 2020 4 commits
  35. 09 Mar, 2020 2 commits
  37. 08 Mar, 2020 1 commit
  39. 06 Mar, 2020 2 commits
  41. 02 Mar, 2020 1 commit
  43. 27 Feb, 2020 1 commit
  45. 26 Feb, 2020 3 commits
  47. 20 Feb, 2020 1 commit
    • Manish Pandey's avatar
      SPMD: generate and add Secure Partition blobs into FIP · ce2b1ec6
      Manish Pandey authored 
      

Till now TF-A allows limited number of external images to be made part
of FIP. With SPM coming along, there may exist multiple SP packages
which need to be inserted into FIP. To achieve this we need a more
scalable approach to feed SP packages to FIP.

This patch introduces changes in build system to generate and add SP
packages into FIP based on information provided by platform.
Platform provides information in form of JSON which contains layout
description of available Secure Partitions.
JSON parser script is invoked by build system early on and generates
a makefile which updates FIP, SPTOOL and FDT arguments which will be
used by build system later on for final packaging.

"SP_LAYOUT_FILE" passed as a build argument and can be outside of TF-A
tree. This option will be used only when SPD=spmd.

For each SP, generated makefile will have following entries
     - FDT_SOURCES	+=	sp1.dts
     - SPTOOL_ARGS	+= 	-i sp1.img:sp1.dtb -o sp1.pkg
     - FIP_ARGS		+=	--blob uuid=XXXX-XXX...,file=SP1.pkg
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
Change-Id: Ib6a9c064400caa3cd825d9886008a3af67741af7
      ce2b1ec6