Skip to content

GitLab

Switch branch/tag
  1. 13 Nov, 2017 1 commit
    • Jeenu Viswambharan's avatar
      GIC: Introduce API to get interrupt ID · 4ee8d0be
      Jeenu Viswambharan authored 
      

Acknowledging interrupt shall return a raw value from the interrupt
controller in which the actual interrupt ID may be encoded. Add a
platform API to extract the actual interrupt ID from the raw value
obtained from interrupt controller.

Document the new function. Also clarify the semantics of interrupt
acknowledge.

Change-Id: I818dad7be47661658b16f9807877d259eb127405
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      4ee8d0be
  3. 09 Nov, 2017 1 commit
  5. 08 Nov, 2017 1 commit
    • Antonio Nino Diaz's avatar
      SPM: Introduce Secure Partition Manager · 2fccb228
      Antonio Nino Diaz authored 
      

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: default avatarAchin Gupta <achin.gupta@arm.com>
Co-authored-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      2fccb228
  7. 25 Oct, 2017 1 commit
  9. 24 Oct, 2017 1 commit
  11. 16 Oct, 2017 11 commits
  13. 11 Oct, 2017 2 commits
    • Soby Mathew's avatar
      ARM platforms: enable GICv3 state save/restore · e35a3fb5
      Soby Mathew authored 
      

Provides GICv3 save/restore feature to arm_system_pwr_domain_resume and
arm_system_pwr_domain_save functions.

Introduce FVP PSCI power level 3 (System level) support. This is solely
done to provide example code on how to use the GICv3 save and restore
helpers.

Also make CSS GICv3 platforms power off the Redistributor on SYSTEM
SUSPEND as its state is saved and restored.

Change-Id: I0d852f3af8824edee1a17c085cf593ddd33a4e77
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
Co-Authored-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      e35a3fb5
    • Soby Mathew's avatar
      ARM platforms: Add support for EL3 TZC memory region · a22dffc6
      Soby Mathew authored 
      

Some recent enhancements to EL3 runtime firmware like support for
save and restoring GICv3 register context during system_suspend
necessitates additional data memory for the firmware. This patch
introduces support for creating a TZC secured DDR carveout for use
by ARM reference platforms. A new linker section `el3_tzc_dram` is
created using platform supplied linker script and data marked with
the attribute `arm_el3_tzc_dram` will be placed in this section.
The FVP makefile now defines the `PLAT_EXTRA_LD_SCRIPT` variable to
allow inclusion of the platform linker script by the top level BL31
linker script.

Change-Id: I0e7f4a75a6ac51419c667875ff2677043df1585d
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      a22dffc6
  15. 06 Oct, 2017 1 commit
    • David Cunado's avatar
      Increase PLAT_ARM_MMAP_ENTRIES and MAX_XLAT_TABLES · 2e421ad2
      David Cunado authored 
      

The MEM_PROTECT support adds a MMAP region for DRAM2, which when
building with TBBR support and OP-TEE tsp requires an additional
entry in the MMAP region array in BL2 - PLAT_ARM_MMAP_ENTRIES is
increased.

The MEM_PROTECT support also adds a new region in BL31, and when
BL31 is placed in DRAM, the memory mappings require an additional
translation table - MAX_XLAT_TABLES is increased.

Change-Id: I0b76260da817dcfd0b8f73a7193c36efda977625
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      2e421ad2
  17. 25 Sep, 2017 2 commits
    • Roberto Vargas's avatar
      mem_protect: Add DRAM2 to the list of mem protected ranges · b09ba056
      Roberto Vargas authored 
      

On ARM platforms, the maximum size of the address space is limited
to 32-bits as defined in arm_def.h. In order to access DRAM2, which
is defined beyond the 32-bit address space, the maximum address space
is increased to 36-bits in AArch64. It is possible to increase the
virtual space for AArch32, but it is more difficult and not supported
for now.

NOTE - the actual maximum memory address space is platform dependent
and is checked at run-time by querying the PARange field in the
ID_AA64MMFR0_EL1 register.

Change-Id: I6cb05c78a63b1fed96db9a9773faca04a5b93d67
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      b09ba056
    • Roberto Vargas's avatar
      mem_protect: Add mem_protect support in Juno and FVP for DRAM1 · f145403c
      Roberto Vargas authored 
      

mem_protect needs some kind of non-volatile memory because it has
to remember its state across reset and power down events.
The most suitable electronic part for this feature is a NVRAM
which should be only accesible from the secure world. Juno and
FVP lack such hardware and for this reason the MEM_PROTECT
functionality is implemented with Flash EEPROM memory on both
boards, even though this memory is accesible from the non-secure
world. This is done only to show a full implementation of
these PSCI features, but an actual system shouldn't use a
non-secure NVRAM to implement it.

The EL3 runtime software will write the mem_protect flag and BL2
will read and clear the memory ranges if enabled. It is done in
BL2 because it reduces the time that TF needs access to the full
non-secure memory.

The memory layout of both boards is defined using macros which
take different values in Juno and FVP platforms. Generic platform
helpers are added that use the platform specific macros to generate
a mem_region_t that is valid for the platform.

Change-Id: I2c6818ac091a2966fa07a52c5ddf8f6fde4941e9
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      f145403c
  19. 22 Sep, 2017 1 commit
  21. 12 Sep, 2017 1 commit
    • Qixiang Xu's avatar
      plat/arm: Fix BL31_BASE when RESET_TO_BL31=1 · fd5763ea
      Qixiang Xu authored 
      

The value of BL31_BASE currently depends on the size of BL31. This
causes problems in the RESET_TO_BL31 case because the value of
BL31_BASE is used in the model launch parameters, which often changes.

Therefore, this patch fixes BL31_BASE to the middle of Trusted SRAM,
to avoid further model parameter changes in future.

Change-Id: I6d7fa4fe293717d84768974679539c0e0cb6d935
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      fd5763ea
  23. 11 Sep, 2017 1 commit
    • Soby Mathew's avatar
      Implement log framework · 7f56e9a3
      Soby Mathew authored 
      

This patch gives users control over logging messages printed from the C
code using the LOG macros defined in debug.h Users now have the ability
to reduce the log_level at run time using the tf_log_set_max_level()
function. The default prefix string can be defined by platform by
overriding the `plat_log_get_prefix()` platform API which is also
introduced in this patch.

The new log framework results in saving of some RO data. For example,
when BL1 is built for FVP with LOG_LEVEL=LOG_LEVEL_VERBOSE, resulted
in saving 384 bytes of RO data and increase of 8 bytes of RW data. The
framework also adds about 108 bytes of code to the release build of FVP.

Fixes ARM-software/tf-issues#462

Change-Id: I476013d9c3deedfdd4c8b0b0f125665ba6250554
Co-authored-by: default avatarEleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      7f56e9a3
  25. 06 Sep, 2017 2 commits
    • Soby Mathew's avatar
      CSS: Changes for SDS framework · 18e279eb
      Soby Mathew authored 
      

This patch does the required changes to enable CSS platforms
to build and use the SDS framework. Since SDS is always coupled with
SCMI protocol, the preexisting SCMI build flag is now renamed to
`CSS_USE_SCMI_SDS_DRIVER` which will enable both SCMI and SDS on
CSS platforms. Also some of the workarounds applied for SCMI are
now removed with SDS in place.

Change-Id: I94e8b93f05e3fe95e475c5501c25bec052588a9c
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      18e279eb
    • Soby Mathew's avatar
      Fix JUNO AArch32 build · ba6c31da
      Soby Mathew authored 
      

This patch fixes the inconsistency with regards as to how
BL2_BASE/BL2U_BASE and BL2_LIMIT/BL2U_LIMIT macros are defined
when building Juno to run in AArch32 mode at EL3. In this case,
BL32 is compiled for AArch32 whereas BL1 and BL2 are compiled
for AArch64. This resulted in BL32 conditionally compiling a
different definition of the above mentioned macros from BL1/BL2.
This is fixed by taking into consideration the
JUNO_AARCH32_EL3_RUNTIME build flag as well in the conditional
compilation check.

Change-Id: I27ac68aa4df0502089c1739c05366a9c509eb5be
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      ba6c31da
  27. 05 Sep, 2017 1 commit
  29. 31 Aug, 2017 1 commit
  31. 29 Aug, 2017 1 commit
    • Jeenu Viswambharan's avatar
      plat/arm: Fix ARM_INSTANTIATE_LOCK syntax anomaly · 19583169
      Jeenu Viswambharan authored 
      

The current definition of ARM_INSTANTIATE_LOCK macro includes a
semicolon, which means it's omitted where it's used. This is anomalous
for a C statement in global scope.

Fix this by removing semicolon from the definition; and where it's a
NOP, declare a file-scoped variable explicitly tagged as unused to avoid
compiler warning.

No functional changes.

Change-Id: I2c1d92ece4777e272a025011e03b8003f3543335
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      19583169
  33. 25 Aug, 2017 1 commit
    • Jens Wiklander's avatar
      ARM plat: change OP-TEE pageable load base · 04f72bae
      Jens Wiklander authored 
      

Changes ARM_OPTEE_PAGEABLE_LOAD_BASE to end of ARM_AP_TZC_DRAM1.
ARM_OPTEE_PAGEABLE_LOAD_SIZE is also increased to 4MB to optimize
translation table usage.

This change makes loading of paged part easier inside OP-TEE OS as the
previous location of ARM_OPTEE_PAGEABLE_LOAD_BASE normally isn't mapped
if paging is enabled.
Signed-off-by: default avatarJens Wiklander <jens.wiklander@linaro.org>
      04f72bae
  35. 22 Aug, 2017 2 commits
  37. 09 Aug, 2017 1 commit
    • Summer Qin's avatar
      Add Trusted OS extra image parsing support for ARM standard platforms · 54661cd2
      Summer Qin authored 
      

Trusted OS may have extra images to be loaded. Load them one by one
and do the parsing. In this patch, ARM TF need to load up to 3 images
for optee os: header, pager and paged images. Header image is the info
about optee os and images. Pager image include pager code and data.
Paged image include the paging parts using virtual memory.

Change-Id: Ia3bcfa6d8a3ed7850deb5729654daca7b00be394
Signed-off-by: default avatarSummer Qin <summer.qin@arm.com>
      54661cd2
  39. 02 Aug, 2017 1 commit
    • Jeenu Viswambharan's avatar
      FVP: Support Base FVP RevC · 955242d8
      Jeenu Viswambharan authored 
      

Revision C of the Base FVP has the same memory map as earlier revisions,
but has the following differences:

  - Implements CCI550 instead of CCI400,
  - Has a single instantiation of SMMUv3,
  - CPU MPIDs are shifted left by one level, and has MT bit set in them.

The correct interconnect to program is chosen at run time based on the
FVP revision. Therefore, this patch implements FVP functions for
interconnect programming, rather than depending on ARM generic ones. The
macros used have been renamed to reflect this change.

Additionally, this patch initializes SMMUv3 as part of FVP early
platform setup.

New ARM config flags are introduced for feature queries at run time.

Change-Id: Ic7b7f080953a51fceaf62ce7daa6de0573801f09
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      955242d8
  41. 25 Jul, 2017 1 commit
  43. 20 Jul, 2017 1 commit
    • Soby Mathew's avatar
      CSS: Prevent SCP_BL2/2U from overwriting BL1 RW data · 1ea63d77
      Soby Mathew authored 
      

On ARM CSS platforms, the SCP_BL2/2U image is loaded below
BL1 read-write data. This same memory is used to load BL31
later on. But sufficient checks were not done to ensure that the
SCP_BL2 would not overwrite BL1 rw data. This patch adds the
required CASSERT checks to prevent overwrite into BL1 or BL2
memory by load of SCP_BL2/2U. Also the size of BL31 is increased
and SCP_BL2/2U size is decreased to accomodate it within the
allocated region.

Change-Id: I23b28b5e1589e91150852a06452bd52b273216ee
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      1ea63d77
  45. 28 Jun, 2017 1 commit
    • Soby Mathew's avatar
      ARM plat changes to enable CryptoCell integration · e60f2af9
      Soby Mathew authored 
      

This patch makes the necessary changes to enable ARM platform to
successfully integrate CryptoCell during Trusted Board Boot. The
changes are as follows:

* A new build option `ARM_CRYPTOCELL_INTEG` is introduced to select
  the CryptoCell crypto driver for Trusted Board boot.

* The TrustZone filter settings for Non Secure DRAM is modified
  to allow CryptoCell to read this memory. This is required to
  authenticate BL33 which is loaded into the Non Secure DDR.

* The CSS platforms are modified to use coherent stacks in BL1 and BL2
  when CryptoCell crypto is selected. This is because CryptoCell makes
  use of DMA to transfer data and the CryptoCell SBROM library allocates
  buffers on the stack during signature/hash verification.

Change-Id: I1e6f6dcd1899784f1edeabfa2a9f279bbfb90e31
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      e60f2af9
  47. 22 Jun, 2017 1 commit
    • dp-arm's avatar
      aarch64: Enable Statistical Profiling Extensions for lower ELs · d832aee9
      dp-arm authored 
      

SPE is only supported in non-secure state.  Accesses to SPE specific
registers from SEL1 will trap to EL3.  During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained.  This is to
avoid a potential invalid memory access in SEL1.

SPE is architecturally specified only for AArch64.

Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: default avatardp-arm <dimitris.papastamos@arm.com>
      d832aee9
  49. 20 Jun, 2017 1 commit
  51. 05 Jun, 2017 1 commit