- 11 Feb, 2019 2 commits
-
-
Antonio Nino Diaz authored
There are some incorrect casts and some missing casts in the headers. This patch fixes the ones that were 64-bit or 32-bit wide wrongly and adds casts where they were missing. Note that none of the changes of the patch actually changes the values of the definitions. This patch is just for correctness. Change-Id: Iad6458021bad521922ce4f91bafff38b116b49eb Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
There are some values that should be 64-bit immediates but that resolve to 0 because the type of the value is 32-bit wide. This patch casts the expressions to 64-bit before the shift so that the definition has the correct value. The definitions are only used in assembly so far, so the code is not actually affected by this bug. The assembler treats all values as 64-bit values, so there are no overflows. Change-Id: I965e4be631c1d28787c0913661d224c82a6b9155 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 08 Feb, 2019 2 commits
-
-
Antonio Nino Diaz authored
Now that setjmp() and longjmp() are compliant with the standard they can be moved with the other libc files. Change-Id: Iea3b91c34eb353ace5e171e72f331602d57774d5 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Instead of having a custom implementation of setjmp() and longjmp() it is better to follow the C standard. The comments in setjmp.h are no longer needed as there are no deviations from the expected one, so they have been removed. All SDEI code that relied on them has been fixed to use the new function prototypes and structs. Change-Id: I6cd2e21cb5a5bcf81ba12283f2e4c067bd5172ca Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 06 Feb, 2019 1 commit
-
-
Antonio Nino Diaz authored
The Generic Timer is an optional extension to an ARMv7-A implementation. The generic delay timer can be used from any architecture supported by the Trusted Firmware. In ARMv7 it is needed to check that this feature is present. In ARMv8 it is always present. Change-Id: Ib7e8ec13ffbb2f64445d4ee48ed00f26e34b79b7 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 01 Feb, 2019 2 commits
-
-
Antonio Nino Diaz authored
Many parts of the code were duplicating symbols that are defined in include/common/bl_common.h. It is better to only use the definitions in this header. As all the symbols refer to virtual addresses, they have to be uintptr_t, not unsigned long. This has also been fixed in bl_common.h. Change-Id: I204081af78326ced03fb05f69846f229d324c711 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Sandrine Bailleux authored
PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base address, it is an absolute address. Rename it to avoid any confusion. Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
-
- 31 Jan, 2019 3 commits
-
-
Ying-Chun Liu (PaulLiu) authored
This commit adds SDHost driver for RaspberryPi3. SDHost driver uses the GPIO driver to connect the SDCard and SDHost. By using this driver it is able to read/write raw blocks on SDCard. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
-
Mihir Joshi authored
This patch adds support to handle following TLK SMCs: {TLK_SS_REGISTER_HANDLER, TLK_REGISTER_NS_DRAM_RANGES, TLK_SET_ROOT_OF_TRUST} These SMCs need to be supported in ATF in order to forward them to TLK. Otherwise, these functionalities won't work. Brief: TLK_SS_REGISTER_HANDLER: This SMC is issued by TLK Linux Driver to set up secure storage buffers. TLK_REGISTER_NS_DRAM_RANGES: Cboot performs this SMC during boot to pass NS memory ranges to TLK. TLK_SET_ROOT_OF_TRUST: Cboot performs this SMC during boot to pass Verified Boot parameters to TLK. Change-Id: I18af35f6dd6f510dfc22c1d1d1d07f643c7b82bc Reviewed-on: https://git-master.nvidia.com/r/1643851 Signed-off-by: Mihir Joshi <mihirj@nvidia.com>
-
Sandrine Bailleux authored
Commit ed51b51f ("Remove build option LOAD_IMAGE_V2") intended to remove all code related to LOAD_IMAGE_V2=0 but missed a few things. Change-Id: I16aaf52779dd4af1e134e682731328c5f1e5d622 Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
-
- 30 Jan, 2019 2 commits
-
-
Antonio Nino Diaz authored
This reverts commit 2f370465 ("Add support for the SMC Calling Convention 2.0"). SMCCC v2.0 is no longer required for SPM, and won't be needed in the future. Removing it makes the SMC handling code less complicated. The SPM implementation based on SPCI and SPRT was using it, but it has been adapted to SMCCC v1.0. Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Sathees Balya authored
ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the size of translation tables by increasing the maximum permitted value of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and VSTCR_EL2. This feature is supported in AArch64 state only. This patch adds support for this feature to both versions of the translation tables library. It also removes the static build time checks for virtual address space size checks to runtime assertions. Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093 Signed-off-by: Sathees Balya <sathees.balya@arm.com>
-
- 25 Jan, 2019 8 commits
-
-
Ying-Chun Liu (PaulLiu) authored
This commit adds GPIO driver for RaspberryPi3. The GPIO driver for RPi3 also provides the way to do pinmux selections. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
-
Antonio Nino Diaz authored
Change-Id: I670ea80e0331c2d4b2ccfa563a45469a43f6902d Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: Ia601d5ad65ab199e747fb60af4979b7db477d249 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: Ida5dae39478654405d0ee31a6cbddb4579e76a7f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: Icc59cdaf2b56f6936e9847f1894594c671db2e94 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I656753a1825ea7340a3708b950fa6b57455e9056 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I8989d2aa0258bf3b50a856c5b81532d578600124 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Use full include paths like it is done for common includes. This cleanup was started in commit d40e0e08283a ("Sanitise includes across codebase"), but it only cleaned common files and drivers. This patch does the same to Arm platforms. Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 23 Jan, 2019 2 commits
-
-
Varun Wadekar authored
This patch provides helper function to read the ID_AFR0_EL1 system register for platforms. Change-Id: Id5491b18e3bf9f619d98d6cc8efd9d2cf5918c9d Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Sathees Balya authored
On ARM platforms, the BL2 memory can be overlaid by BL31/BL32. The memory descriptors describing the list of executable images are created in BL2 R/W memory, which could be possibly corrupted later on by BL31/BL32 due to overlay. This patch creates a reserved location in SRAM for these descriptors and are copied over by BL2 before handing over to next BL image. Also this patch increases the PLAT_ARM_MAX_BL2_SIZE for juno when TBBR is enabled. Fixes ARM-Software/tf-issues#626 Change-Id: I755735706fa702024b4032f51ed4895b3687377f Signed-off-by: Sathees Balya <sathees.balya@arm.com>
-
- 22 Jan, 2019 2 commits
-
-
Andrew F. Davis authored
Valid addresses for GICR base are always a set calculable distance from the GICD and is based on the number of cores a given instance of GICv3 IP can support. The formula for the number of address bits is given by the ARM GIC-500 TRM section 3.2 as 2^(18+log2(cores)) with the MSB set to one for GICR instances. Holes in the GIC address space are also guaranteed to safely return 0 on reads. This allows us to support runtime detection of the GICR base address by starting from GIC base address plus BIT(18) and walking until the GICR ID register (IIDR) is detected. We stop searching after BIT(20) to prevent searching out into space if something goes wrong. This can be extended out if we ever have a device with 16 or more cores. Signed-off-by: Andrew F. Davis <afd@ti.com>
-
Antonio Nino Diaz authored
The SPM implementation based on MM is going to be kept for the foreseeable future. Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Acked-by: Sumit Garg <sumit.garg@linaro.org>
-
- 18 Jan, 2019 6 commits
-
-
Yann Gautier authored
The BSEC (Boot and Security and OTP control) is intended to control an OTP (one time programmable) fuse box, used for on-chip non-volatile storage for device configuration and security parameters. Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Mathieu Belou <mathieu.belou@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Change fdt_check_status function to fdt_get_status. Update GPIO defines. Move some functions in gpio driver, instead of dt helper file. Add GPIO bank helper functions. Use only one status field in dt_node_info structure including both status and secure status. Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
Reword some traces. Use uintptr_t where required. Reduce scope of variables. Improve io_stm32image algo. Complete some IP registers definitions. Add failure on supported DDR (stm32mp1_ddr_init()). Fix cache flush on cache disable (stm32mp1_ddr_setup). Change-Id: Ie02fa71e02b9d69abc807fd5b7df233e5be6668c Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
-
Yann Gautier authored
Change-Id: I4a1b281925e0a3a1e2a34b3e363537e4a7f13823 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
-
Yann Gautier authored
The drivers are also updated to reflect the changes. Set RCC as non-secure. Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
This is the correct name of the IP. Rename stm32mp1_pmic files to stm32mp_pmic. Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 15 Jan, 2019 2 commits
-
-
Antonio Nino Diaz authored
From now on, platform_def.h must include any header with definitions that are platform-specific (like arm_def.h) and the included headers mustn't include back platform_def.h, and shouldn't be used by other files. Only platform_def.h should be included in other files. This will ensure that all needed definitions are present, rather than needing to include all the headers in all the definitions' headers just in case. This also prevents problems like cyclic dependencies. Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for platforms that may need to access them. Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 11 Jan, 2019 1 commit
-
-
Antonio Nino Diaz authored
ARMv8.2-TTCNP is mandatory from ARMv8.2 onwards, but it can be implemented in CPUs that don't implement all mandatory 8.2 features (and so have to claim to be a lower version). This patch removes usage of the ARM_ARCH_AT_LEAST() macro and uses system ID registers to detect whether it is needed to set the bit or not. Change-Id: I7bcbf0c7c937590dfc2ca668cfd9267c50f7d52c Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 08 Jan, 2019 1 commit
-
-
Ard Biesheuvel authored
Update some asserts that refer to #defines that only occur in ARM platforms, preventing this code to be used on other platforms. Instead, use a platform agnostic name, and update all the existing users. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
- 07 Jan, 2019 2 commits
-
-
Soby Mathew authored
The patch SHA 55cf015c enabled PIE support when RESET_TO_BL31=1 for all ARM platforms. But it seems n1sdp platform doesn't work with PIE support yet. Hence restrict the ENABLE_PIE=1 to fvp platform. Change-Id: If44e42528e4b0b57c69084503f346576fe0748bd Signed-off-by: Soby Mathew <soby.mathew@arm.com>
-
Yann Gautier authored
Instead, only platform_def.h is included. The required files to be included are added in stm32mp1_def.h. Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 04 Jan, 2019 3 commits
-
-
Antonio Nino Diaz authored
Enforce full include path for includes. Deprecate old paths. The following folders inside include/lib have been left unchanged: - include/lib/cpus/${ARCH} - include/lib/el3_runtime/${ARCH} The reason for this change is that having a global namespace for includes isn't a good idea. It defeats one of the advantages of having folders and it introduces problems that are sometimes subtle (because you may not know the header you are actually including if there are two of them). For example, this patch had to be created because two headers were called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform to avoid collision."). More recently, this patch has had similar problems: 46f9b2c3 ("drivers: add tzc380 support"). This problem was introduced in commit 4ecca339 ("Move include and source files to logical locations"). At that time, there weren't too many headers so it wasn't a real issue. However, time has shown that this creates problems. Platforms that want to preserve the way they include headers may add the removed paths to PLAT_INCLUDES, but this is discouraged. Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
The architecture dependant header files in include/lib/${ARCH} and include/common/${ARCH} have been moved to /include/arch/${ARCH}. Change-Id: I96f30fdb80b191a51448ddf11b1d4a0624c03394 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Even though this is not used unless SPD=tspd, only defining it when SPD_tspd is defined doesn't have any advantage and it makes it harder to read the code. Change-Id: I3d93135e05f39be071d16f8a47394a9a3ff54bc8 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 03 Jan, 2019 1 commit
-
-
Sathees Balya authored
This patch enables the Data Independent Timing functionality (DIT) in EL3 if supported by the platform. Change-Id: Ia527d6aa2ee88a9a9fe1c941220404b9ff5567e5 Signed-off-by: Sathees Balya <sathees.balya@arm.com>
-