1. 15 Jun, 2017 1 commit
  2. 13 Jun, 2017 1 commit
  3. 12 Jun, 2017 2 commits
  4. 08 Jun, 2017 11 commits
  5. 07 Jun, 2017 4 commits
  6. 05 Jun, 2017 2 commits
    • Soby Mathew's avatar
      Add SCMI support for Juno platform · 40111d44
      Soby Mathew authored
      
      
      This patch adds the memory map region for the SCMI payload memory
      and maps the Juno core indices to SCMI power domains via the
      `plat_css_core_pos_to_scmi_dmn_id_map` array.
      
      Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
      Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      40111d44
    • Soby Mathew's avatar
      CSS: Add SCMI driver for SCP · c04a3b6c
      Soby Mathew authored
      
      
      This patch adds the SCMI driver for communicating with SCP. The power
      domain management and system power management protocol of the SCMI
      specification[1] is implemented in the driver. The SCP power management
      abstraction layer for SCMI for CSS power management is also added.
      
      A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
      driver over SCPI.
      
      [1] ARM System Control and Management Interface v1.0 (SCMI)
      Document number: ARM DEN 0056A
      
      Change-Id: I67265615a17e679a2afe810b9b0043711ba09dbb
      Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      c04a3b6c
  7. 01 Jun, 2017 2 commits
    • Jeenu Viswambharan's avatar
      Introduce ARM GIC-600 driver · e1c59ab3
      Jeenu Viswambharan authored
      
      
      ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
      implements a power control register in the Redistributor frame. This
      register must be programmed to mark the frame as powered on, before
      accessing other registers in the frame. Rest of initialization sequence
      remains the same.
      
      The driver provides APIs for Redistributor power management, and
      overrides those in the generic GICv3 driver. The driver data is shared
      between generic GICv3 driver and that of GIC-600.
      
      For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
      is set to FVP_GIC600. Also update user guide.
      
      Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67
      Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      e1c59ab3
    • David Wang's avatar
      Add support for Cortex-A75 and Cortex-A55 CPUs · d40ab484
      David Wang authored
      
      
      Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
      (DSU). The power-down and power-up sequences are therefore mostly
      managed in hardware, and required software operations are considerably
      simpler.
      
      Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
      Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      d40ab484
  8. 31 May, 2017 4 commits
  9. 24 May, 2017 8 commits
  10. 23 May, 2017 2 commits
    • Masahiro Yamada's avatar
      FVP,Juno: switch FVP and Juno to use generic TBBR OID header · 232c6b34
      Masahiro Yamada authored
      
      
      The header tbbr_oid.h contains OIDs obtained by ARM Ltd.
      so there is no good reason to use platform_oid.h
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      232c6b34
    • Masahiro Yamada's avatar
      cert: move platform_oid.h to include/tools_share for all platforms · bb41eb7a
      Masahiro Yamada authored
      
      
      Platforms aligned with TBBR are supposed to use their own OIDs, but
      defining the same macros with different OIDs does not provide any
      value (at least technically).
      
      For easier use of TBBR, this commit allows platforms to reuse the OIDs
      obtained by ARM Ltd.  This will be useful for non-ARM vendors that
      do not need their own extension fields in their certificate files.
      
      The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h
      
      Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
      defining USE_TBBR_DEFS as 1.  USE_TBBR_DEFS is 0 by default to keep the
      backward compatibility.
      
      For clarification, I inserted a blank line between headers from the
      include/ directory (#include <...>) and ones from a local directory
      (#include "..." ).
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      bb41eb7a
  11. 16 May, 2017 1 commit
  12. 15 May, 2017 2 commits