GitLab

All API calls except non-blocking should wait for
IPI response and read buffer to check return status
from firmware. Some of API calls are not reading
status from IPI payload data. Use sync method which
reads actual return status from IPI payload.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I6f568b85d0da639c264f507122e3015807d8423d

Upon recieving the interrupt send an SGI.
The sgi number is communicated by linux.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: Ib8f07ff7132ba5ac202b546914efb16d04820ed3
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>

Add support for the trapping the IPI in TF-A.
Register handler for the irq no 62 which is the IPI interrupt.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: I9c04fdae7be3dda6a34a9b196274c0b5fdf39223
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>

BIT24 of IPI command header is used to determine if caller is
secure or non-secure.

Mark BIT24 of IPI command header as non-secure if SMC caller
is non-secure.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: Iec25af8f4b202093f58e858ee47cd9cd46890267

Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Icef550072296d6aba89a0827dd72d0b86047556f

Add support of register notifier.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I41ef4c63abcc9aee552790b843adb25a5fd0c23e

Add support to get clock's rate value.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3ed881053ef323b2ca73e13edd0affda860d381d

Add support of set max latency, to change in the maximum powerup latency
requirements for a specific device currently used by Subsystem.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I8749886abb1a7884a42c4d156d89c9cd562a5b1a

Add support to call InitFinalize API in Versal which calls
corresponding LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3428b7245b4db1ef6db8a90b7ad20b6e484ed3b2

For the current XilPM calls, The handler of IPI returns information
with 16 Bytes data.
So during QueryData API call for the ClockName and PinFunctionName,
response data(name of clock or function) response[0..3] are used to
return name. And status is not being returned for such API.

Updated XilPM calls reply in a consistent way and The handler of IPI
return information with 32Bytes data. Where response[0] always set
to status.
For the version-2 of QueryData API, during call for the ClockName
and PinFunctionName, response data(name of clock or function) get as
response[1...4].

To support both the version of QueryData API, added version based
compatibility by the use of feature check.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I336128bff7bbe659903b0f8ce20ae6da7e3b51b4

Add below API in feature check list which is actually present in
firmware:
- PM_GET_CHIPID
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98b82da74164f065c8835861f74b0f2855e9bcbf

This patch adds EEMI support for PM_GET_OPERATING_CHARACTERISTIC api id.  This
interface obtains operating characteristic of a device from PMC firmware.  The
'power', 'temperature', and 'latency' characteristic are the options that are
supported.
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: If30959ba6a3a778a17df2a4281c2c09832cf7e92

Add support for Get_ChipID API in Versal which calls corresponding
LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Acked-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I25c4b301721d7989d982ac376c59195c55564022

This patch adds support for load pdi api to enable loading
pdi from linux.
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I48549e276e1f7b9be45a0bebf559f73bd09d5f69

Add API to check availability of given API in ATF
as well as platform management controller and returns
the supported version number.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I608b38f60b36c4d105b7a205ecb8b02de0c00f3c

Add GET_CALLBACK_DATA function to get IPI callback
data in Linux during init suspend callback.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb60e561b5f656611f0702c43ba6a4296a012651

Add following APIs in plat_psci to support system shutdown & reset:
- versal_system_off
- versal_system_reset
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia2c1a19ded18984b393e1fdee760bf48b45e9902

Implement set wakeup source API to pass SMC
call for set wakeup source to PLM (Platform Loader
and Manager).
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I654ce07235c0fc7dfcb81bf98820153255f61537

Add PM_QUERY_DATA API to pass query data
EEMI call from Linux to PLM .
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I18735b72ab9cb62fb6cbc7582e77de6cb57f99b0

Implement request wakeup API for versal.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I40a2a4ea85bf05623ac8a17ef4a6fa329babd27e

Add PM IOCTL EEMI.

Below PLL related IOCTLs are not available in versal PLM.
	* IOCTL_SET_PLL_FRAC_MODE
	* IOCTL_GET_PLL_FRAC_MODE
	* IOCTL_SET_PLL_FRAC_DATA
	* IOCTL_SET_PLL_FRAC_DATA

PLM has new EEMI APIs for PLL related operations.
Call them instead of passing IOCTL API to PLM.
For other IOCTL, ATF just pass through IOCTL
request to PLM (Platform Loader and Manager).
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I96f8da46a4d3965c9291b7b2da96056408137839

Add power down/restart related below API
 - Force power down
 - System shutdown
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Icd4a922923b1fd50eca1f5361f1e604aedcdb529

Implement below PLL related APIs:
- Set PLL parameter
- Get PLL parameter
- Set PLL mode
- Get PLL mode
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I37749d05cdb73641d32da120d319cf36df97c73f

Implement below clock related APIs:
  - Clock enable
  - Clock disable
  - Clock get status
  - Clock set divider
  - Clock get divider
  - Clock set parent
  - Clock get parent
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ibb3606e88ac6796d9d759226908b2c2997c5fea0

Implement below pin control related APIs:
  - Request pin
  - Release pin
  - Set pin function
  - Get pin function
  - Set pin parameter value
  - Get pin parameter value
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ib805cc8c936b63206d44bf1f7bebd0f03f7b3c01

Implement below reset related APIs:
  - Reset assert
  - Get reset status
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id42c9d3950a0d69125cb0eab79b75e5d22674f14

Implement below device related PM APIs:
  - Request device
  - Release device
  - Set requirement
  - Get device status
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I9d84b9ee1be3ee6c5f27a4d6dc324113fc1acb68

Add support for below suspend related APIs.
- self_suspend
- abort_suspend
- request_suspend
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: If568e0cd33b64754fe66f66fc0cdd0ec62c1b32e

Add support for EEMI API get_api_verion.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic1ef90a194ae6164994a7fc5d8ff0b7b192636fe