GitLab

This patch implements CSS platform hook to support NODE_HW_STATE PSCI
API. The platform hook queries SCP to obtain CSS power state. Power
states returned by SCP are then converted to expected PSCI return codes.

Juno's PSCI operation structure is modified to use the CSS
implementation.

Change-Id: I4a5edac0e5895dd77b51398cbd78f934831dafc0

This patch adds the function scpi_get_css_power_state to perform the
'Get CSS Power State' SCP command and handle its response. The function
parses SCP response to obtain power states of requested cluster and CPUs
within.

Change-Id: I3ea26e48dff1a139da73f6c1e0893f21accaf9f0

This patch implements FVP platform hook to support NODE_HW_STATE PSCI
API. The platform hook validates the given MPIDR and reads corresponding
status from FVP power controller, and returns expected values for the
PSCI call.

Change-Id: I286c92637da11858db2c8aba8ba079389032de6d

We must guarantee that writes have become effective before returning to
the caller. Hence, wait for PMUFW signaling completion of the FW call
before returning to the rich OS.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Add support to provide silicon id to non-secure
software through SMC.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

[ sb
Move zynqmp_get_silicon_id outside of compile guards to avoid build
errors.
]
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstream into zynqmp
PL region.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>

This patch adds a new pm ID to sync with PMUFW ID numbers.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.

Identifying if device may wake the system is done by checking if any
interrupt of that device is enabled in GICD_ISENABLER when the APU is
about to enter SUSPEND_TO_RAM state. If such interrupt is found,
pm_set_wakeup_source is called with corresponding PM node ID as
argument.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
  on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
  powered down, all OCM banks in retention and DDR in
  self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
 - remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>

Implementation is based on arm_validate_power_state().
This function is called during CPU_SUSPEND PSCI call to validate
power_state parameter. If state is valid this function populate it
in req_state array as power domain level specific local state.
ATF platform migration guide chapter 2.2 defines this function as
mandatory for PSCIv1.0 CPU_SUSPEND support.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>

When moving the ATF into the DRAM address space an additional
translation table is required.
Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

The OCM space was reorganized to use the space more efficiently. Adjust
the default ATF location to be aligned with other ZynqMP software
components.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1 register.

This is needed for our cortexa53 edac linux driver testing.
These registers need write access from non secure EL1 i.e linux
at the time of setting the above bits.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>

ZynqMP only supports builds with RESET_TO_BL31=1. Set this option
through the platform makefile on default.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Nodes represent IPI dedicated to the RPU (not accessible by APU)
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

Initialize the generic_delay_timer in the zynqmp port.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

We make sure the resuming of gic need to be enabled.
Otherwise, The resume will hit the below panic.
...
[   24.230541] CPU0: update max cpu_capacity 451
[   24.236029] CPU5: update max cpu_capacity 1024
[   24.236046] CPU4: shutdown
[   24.243205] psci: CPU4 killed.
[   24.258730] CPU5: shutdown
[   24.261472] psci: CPU5 killed.
[   24.270417] GIC: unable to set SRE (disabled at EL2), panic ahead
[   24.270417] cat[7801]: undefined instruction: pc=ffffffc0004e65d0
[   24.270417] Code: b0003940 91274400 97f871af d2801e00 (d5184600)
[   24.270417] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT

Change-Id: Ie9542c8d5768ba0accfa073453da8bfe06d4f921

This patch support single core to boot to Linux kernel
through Trusted Firmware.
It also support 32 bit kernel and 64 bit kernel booting.

As the checkpatch reports the warning or error.

plat/rockchip/common/plat_pm.c:96:
ERROR: do not set execute permissions for source files
plat/rockchip/rk3399/drivers/pmu/pmu.c:294:
ERROR: do not set execute permissions for source files

plat/rockchip/common/plat_pm.c:286: WARNING: line over 80 characters
plat/rockchip/common/plat_pm.c:287: WARNING: line over 80 characters

Change-Id: Ib347da21c56551c31df3f90f03777b13c75d5c26

for compatible 32bit and 64bit, we use 0x82xxxxxx as function ID,
we modify SIP call function return value to 32 bit.

Change-Id: Ib99b03a9ea423853aaa296dcc634ee82c622a552

For save power cosumption, if gpio power supply shut down, we need to
set gpio2 ~ gpio4 to input and HiZ status when suspend, and recovery
they status when rusume. we do it base on apio pass from loader.

Change-Id: I59fd2395e5e37e63425472a39f519822c9197e4c

some specific board need to disable/enable specific gpio when
suspend/resume, so we add this function, bootloader can pass the
specific gpio, and we can handle these gpios in bl31 suspend/resuem
function.

Change-Id: I373b03ef9202ee4a05a2b9caacdfa01b47ee2177

We may need gpio pull mode later, so add this function.
Besides fix a set pull mode bug, and save gpio clock gate,
when operate the gpio, we will enable gpio clock, when
finish gpio operate, restore gpio clock gate status.

Change-Id: Ia1d602804f571a17f5ddc499908663b968b02974

As rk3399 reported the d8/octane scores drop 10% with cpu idle.
The root cause is thc cpu cluster enter the slow mode.
We don't need switch the clock to 24MHz if cpu cluster enter the
retention mode. In order to improve performance, it just needs for
cluster enter powering off mode.

Also, we shouldn't do anything for hlvl if the system is off.

Change-Id: I2a02962a01343abd0cba47ed63192c1cdf88b119

For the PMU design, we don't expect to get the interrupts before enter
the power mode. Since that will cause the confusion for the state
machine in the power mode.

Change-Id: Id8dee79ae617a66271b5caf92caf35f520f45099

Change-Id: I986d64df9dc62354d50ccea0468b90f090a44160
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

If we don't enable the Schmitt trigger on the 32 kHz clock then systems
won't always resume from suspend properly.  Presumably anything else in
the system that relies on the 32 kHz clock also will have problems
without the Schmitt trigger enabled.

Enable it always since having the 32 kHz clock on GPIO0_A0 isn't
exactly an optional feature, so all boards using rk3399 will need this.

Change-Id: Idc18c6cd1adc5be5f60efd9cb805d83d5cd40129

add auto_pd_dis_freq parameter, we can pass a frequency from kernel
to disable or enable ddr auto power down function.

Change-Id: Ie30914701336c59047c380381c6b75dd76a89562

add dram driver, and kernel can through sip function talk to bl31 to
do ddr frequency scaling. and ddr auto powerdown.

Change-Id: I0d0f2869aed95e336c6e23ba96a9310985c84840

In a previous change we mistakenly thought that PMU_24M_EN_CFG directly
controlled whether the PMU counts ran off the 32k vs. 24M clock.
Apparently that's not true.  Real logic is now documented in code.

Also in the previous change we mistaknely though that PMU_24M_EN_CFG was
normally supposed to be 1 and we should "restore" it at resume time.
This is a terrible idea and made the system totally unreliable after
resume.  Apparently PMU_24M_EN_CFG should always be 0 with all the
current code and settings.

Let's fix the above two problems.  While we're changing all of this,
let's also:

1. Init at boot time.  Many of these counts are used when the system is
   running normally.  We want the behavior at boot to match the behavior
   after suspend/resume.

2. Init CPU counts to be 1 us.  Although old code was trying to set this
   to 1 ms (1000x slower) at suspend/resume time, we've been testing the
   kernel with 1 us for a long time now.  That's because the kernel (at
   boot time) set these values to 24.  Let's keep at 24 until we know
   that's wrong.

3. Init GPU counts to be 1 us.  Old code wasn't touching the GPU, but as
   documented in comments it makes sense to init here.  Do it.

4. Document the crap out of this code, since the SoC's behavior is
   confusing and poorly documented in the TRM.

5. Increase some stabilization times to 30 ms (from 3 ms).  It's unclear
   that a full 30 ms is needed, but let's be safe for now.

This also inits the counts for the GPU.

(Thanks to Doug's patch that come from https://crosreview.com/372381)

Change-Id: Id1bc159a5a99916aeab043895e5c4585c4adab22

This patch adds a WFI instruction in the default implementations of
plat_error_handler() and plat_panic_handler(). This potentially reduces
power consumption by allowing the hardware to enter a low-power state.
The same change has been made to the FVP and Juno platform ports.

Change-Id: Ia4e6e1e5bf1ed42efbba7d0ebbad7be8d5f9f173

The pmusgrf reset-hold bits needs to be released, since the
pmusgrf reset-hold bits needs to be held.

Change-Id: Ia1eccc8fba18294f26b4cc07d47bc5e513dd9a1f

Sometimes this will cause the long delay for suspend/resume.
Since the 24M OCS will be turned off in power mode.
Also, remove the ERROR_DEPRECATED config define.

Change-Id: I78f21c35912c2250972e551695cdacc7bc4c020a

This patch updates some things for rk3399, as following:

1) Add the new file to handle the pwm. (e.g. the pwm regulator)
Make sure that good deal with the pwm related things.
Also, remove some pwm setting for pmu.c.

2) Set the plls slow mode and bypass in suspend, and restore them.

Change-Id: I112806700bf433c87763aac23d22fa7e6a7f5264

This patch implements the support for SP_MIN in FVP. The SP_MIN platform
APIs are implemented and the required makefile support is added for FVP.

Change-Id: Id50bd6093eccbd5e38894e3fd2b20d5baeac5452

This patch adds AArch32 support for FVP and implements common platform APIs
like `plat_get_my_stack`, `plat_set_my_stack`, `plat_my_core_cos` for AArch32.
Only Multi Processor(MP) implementations of these functions are considered in
this patch. The ARM Standard platform layer helpers are implemented for
AArch32 and the common makefiles are modified to cater for both AArch64 and
AArch32 builds. Compatibility with the deprecated platform API is not
supported for AArch32.

Change-Id: Iad228400613eec91abf731b49e21a15bcf2833ea

This patch migrates the upstream platform makefiles to include the
console drivers from the new location in ARM Trusted Firmware code
base.

Change-Id: I866d6c4951e475de1f836ce8a8c1d5e6da9577e3