- 14 Dec, 2020 2 commits
-
-
Samuel Holland authored
This gives the rich OS the flexibility to choose between I2C and RSB communication. Since a runtime address can only be assigned once after entering RSB mode, it also lets the rich OS choose any runtime address. Signed-off-by:Samuel Holland <samuel@sholland.org> Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8
-
Samuel Holland authored
None of the other drivers (Linux, U-Boot, Crust) need to lower the bus clock frequency to switch the PMIC to RSB mode. That logic is not needed here, either. The hardware takes care of running this transaction at the correct bus frequency. Signed-off-by:
-
- 08 Dec, 2020 6 commits
-
-
Ravi Patel authored
Current implementation doesn't support change of div1 value if clk has 2 divisor because div1 clk is the parent of the div2 clk and div2 clk does not have SET_RATE_PARENT flag. This causes div1 value to be fixed and only value of div2 will be adjusted according to required clock rate. Example: Consider a case of nand_ref clock which has 2 divisor and 1 mux. The frequency of mux clock is 1500MHz and default value of div1 and div2 is 15 and 1 respectively. So the final clock will be of 100MHz. When driver requests 80MHz for nand_ref clock, clock framework will adjust the div2 value to 1 (setting div2 value 2 results final clock to 50MHz which is more inaccurate compare to 100Mhz) which results final clock to 100MHz. Ideally the value of div1 and div2 should be updated to 19 and 1 respectively so that final clock goes to around 78MHz. This patch fixes above problem by allowing change in div1 value. Signed-off-by:
Ravi Patel <ravi.patel@xilinx.com> Signed-off-by:
Rajan Vaja <rajan.vaja@xilinx.com> Change-Id: Ibb98f6748d28653fdd1e59bf433b6a37ce9c1a58
-
Siva Durga Prasad Paladugu authored
This patches copies only the valid part of string and avoids filling junk at the end. Signed-off-by:
Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by:
-
Olivier Deprez authored
The primary VM concept is removed from the SPMC. Update the SPMC manifests with number of Execution Contexts and SP workspace size for the first Secure Partition (as it is done for NWd secondary VMs and other SPs). Signed-off-by:Olivier Deprez <olivier.deprez@arm.com> Change-Id: I3b9c52666f7dfe74ab1f7d2148ad0070ee44b54e
-
Olivier Deprez authored
The chosen node is no longer required as the SPMC implements a specific boot flow which no longer requires this node. Signed-off-by: -
Olivier Deprez authored
Signed-off-by: -
Olivier Deprez authored
The PVM concept is removed from the SPMC so the device-memory node which is specifying the device memory range for the PVM is no longer applicable. Signed-off-by:
-
- 07 Dec, 2020 32 commits
-
-
Nina Wu authored
1. Add mcusys related dcm drivers 2. Turn on mcusys-related dcm by default Change-Id: Ibbee37c87cc38e7a6cd7c93c2fc0817aad6dbe95 Signed-off-by:Nina Wu <nina-cm.wu@mediatek.com>
-
elly.chiang authored
enable PTP3 for protecting sysPi Signed-off-by:elly.chiang <elly.chiang@mediatek.com> Change-Id: Ic3a13c8314f829dca8547861b98639d1d9444eb2
-
Nina Wu authored
Add the basic SiP service Change-Id: Ib7f2380aab910adf8d33498a79ecd287273907c5 Signed-off-by: -
Yuchen Huang authored
When system resume, we want to print log as soon as possible. So we add uart save and restore api, and they will be called when systtem suspend and resume. Change-Id: I83b477fd2b39567c9c6b70534ef186993f7053ae Signed-off-by:
Yuchen Huang <yuchen.huang@mediatek.com> Signed-off-by:
Roger Lu <roger.lu@mediatek.com>
-
G.Pangao authored
1.Modify this driver to make it more complete and more standard. 2.And makes this driver available for more IC services. 3.Solve some bugs in the software. Signed-off-by:G.Pangao <gtk_pangao@mediatek.com> Change-Id: I284956d47ebbbd550ec93767679181185e442348
-
Hsin-Hsiung Wang authored
add power-off support Signed-off-by:Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: If19e99971515a8ae1ac9ae21046e4382adc18a69
-
Hsin-Hsiung Wang authored
add pmic mt6359p driver Signed-off-by: -
Nina Wu authored
Init delay_timer for the use of delay functions Change-Id: I35aefd7515bb9259634c8b6bc37d8c74da96e8f1 Signed-off-by: -
Dehui Sun authored
Enable NS access for all systimers. Signed-off-by:Dehui Sun <dehui.sun@mediatek.com> Change-Id: I3693997082a1d6f09fef5a79b6cf5a91be46cb8a
-
James Liao authored
Implement PSCI platform OPs to support CPU hotplug and MCDI. Change-Id: I31abfc752b69ac40e70bc9e7a55163eb39776c44 Signed-off-by:James Liao <jamesjj.liao@mediatek.com>
-
James Liao authored
Add MCDI related drivers to handle CPU powered on/off in CPU suspend. Change-Id: I5110461e8eef86f8383b45f197ec5cb10dbfeb3e Signed-off-by: -
James Liao authored
Add SPMC driver for CPU power on/off. Change-Id: I526b98d5885855efce019dd09cfd93b8816cbf19 Signed-off-by: -
Tejas Patel authored
Add support of register notifier. Signed-off-by:
Tejas Patel <tejas.patel@xilinx.com> Signed-off-by:
-
Tejas Patel authored
Add support to get clock's rate value. Signed-off-by:
-
Tejas Patel authored
Add support of set max latency, to change in the maximum powerup latency requirements for a specific device currently used by Subsystem. Signed-off-by:
-
Ravi Patel authored
Add support to call InitFinalize API in Versal which calls corresponding LibPM API. Signed-off-by:
-
Rajan Vaja authored
For the current XilPM calls, The handler of IPI returns information with 16 Bytes data. So during QueryData API call for the ClockName and PinFunctionName, response data(name of clock or function) response[0..3] are used to return name. And status is not being returned for such API. Updated XilPM calls reply in a consistent way and The handler of IPI return information with 32Bytes data. Where response[0] always set to status. For the version-2 of QueryData API, during call for the ClockName and PinFunctionName, response data(name of clock or function) get as response[1...4]. To support both the version of QueryData API, added version based compatibility by the use of feature check. Signed-off-by:
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by:
Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Signed-off-by:
-
Venkatesh Yadav Abbarapu authored
In JTAG mode check the ATF handoff structure, if the magic string is not present then use bl32 and bl33 default values. Signed-off-by:
-
Ravi Patel authored
Versal firmware adds extra error codes along with PM error codes while sending response to driver. This makes incorrect error identification at driver side. To fix this, mask the unnecessary error bytes before sending the error code to the driver. Signed-off-by:
-
Ravi Patel authored
GIC registers needs to be stored/restored during system suspend/resume only and not during CPU idle. During CPU idle, minimum 1 CPU is in ON state. Signed-off-by:
-
Venkatesh Yadav Abbarapu authored
Add below API in feature check list which is actually present in firmware: - PM_GET_CHIPID Signed-off-by:
-
Ravi Patel authored
Existing code passes ACPU0 to LibPM as node_id in set_wakeup_source() call because last suspending core will be ACPU0 in most of the case. Now it may be possible that user may disable the ACPU0 using hot-plug and after that it suspends Linux. So in that case ACPU0 will not be last suspending core. To overcome above scenario, pass the current running processor ID while calling set_wakeup_source(). Signed-off-by:
-
Pali Rohár authored
Signed-off-by:Pali Rohár <pali@kernel.org> Change-Id: Ieb352f0765882efdcb64ef54e6b2a39768590a06
-
Pali Rohár authored
These two targets are build by make subprocesses and are independent. So splitting them into own targets allow make to build them in parallel. $(TIMBUILD) script depends on $(TIMDDRTOOL) so specify it in Makefile. Signed-off-by: -
Pali Rohár authored
Add check when building mrvl_bootimage that size of bl1 image is not bigger than maximal size. Signed-off-by: -
Pali Rohár authored
FORCE target is used as a dependency for other file targets which needs to be always rebuilt. .PHONY target is standard Makefile target which specify non-file targets and therefore needs to be always rebuilt. Targets clean, realclean and distclean are .PHONY targets used to remove built files. Correctly set that mrvl_clean target is prerequisite for these clean targets to ensure that built files are removed. Finally this change with usage of FORCE target allows to remove mrvl_clean hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess. Signed-off-by: -
Pali Rohár authored
Signed-off-by: -
Pali Rohár authored
Signed-off-by: -
Pali Rohár authored
Create copy of WTMI images instead of moving them into TF-A build directory. Signed-off-by: -
Pali Rohár authored
Rather create a temporary copy in $(BUILD_PLAT) and modify only copy. Signed-off-by: -
Pali Rohár authored
$(WTMI_IMG) is used only by $(MAKE) subprocess in $(DOIMAGEPATH) directory. So calling truncate on $(WTMI_IMG) after $(MAKE) in $(DOIMAGEPATH) has no effect and can just damage input file for future usage. Therefore remove this truncate call. Signed-off-by: -
Venkatesh Yadav Abbarapu authored
Save some space by enabling the log messages like bl33 address only for debug builds. Also check the bl33 and bl32 address and print only if this is not NULL. Signed-off-by:
-
