Skip to content

GitLab

Switch branch/tag
  1. 27 Feb, 2018 1 commit
  3. 21 Feb, 2018 1 commit
  5. 14 Feb, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Remove URLs from comments · fb1198b1
      Antonio Nino Diaz authored 
      

This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:

- The link in `sdei_state.c` can also be found in the documentation file
  `docs/sdei.rst`.

- The bug that the file `io_fip.c` talks about doesn't affect the
  currently supported version of GCC, so it doesn't make sense to keep
  the comment. Note that the version of GCC officially supported is the
  one that comes with Linaro Release 17.10, which is GCC 6.2.

- The link in `tzc400.c` was broken, and it didn't correctly direct to
  the Technical Reference Manual it should. The link has been replaced
  by the title of the document, which is more convenient when looking
  for the document.

Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      fb1198b1
  7. 06 Feb, 2018 2 commits
    • Jeenu Viswambharan's avatar
      TSPD: Require NS preemption along with EL3 exception handling · 6027796f
      Jeenu Viswambharan authored 
      

At present, the build option TSP_NS_INTR_ASYNC_PREEMPT controls how
Non-secure interrupt affects TSPs execution. When TSP is executing:

  1. When TSP_NS_INTR_ASYNC_PREEMPT=0, Non-secure interrupts are received
     at the TSP's exception vector, and TSP voluntarily preempts itself.

  2. When TSP_NS_INTR_ASYNC_PREEMPT=1, Non-secure interrupts causes a
     trap to EL3, which preempts TSP execution.

When EL3 exception handling is in place (i.e.,
EL3_EXCEPTION_HANDLING=1), FIQs are always trapped to EL3. On a system
with GICv3, pending NS interrupts while TSP is executing will be
signalled as FIQ (which traps to EL3). This situation necessitates the
same treatment applied to case (2) above.

Therefore, when EL3 exception handling is in place, additionally
require that TSP_NS_INTR_ASYNC_PREEMPT is set to one 1.

Strictly speaking, this is not required on a system with GICv2, but the
same model is uniformly followed regardless, for simplicity.

Relevant documentation updated.

Change-Id: I928a8ed081fb0ac96e8b1dfe9375c98384da1ccd
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      6027796f
    • Jeenu Viswambharan's avatar
      TSPD: Explicitly allow NS preemption for Yielding SMCs · 1dd022ca
      Jeenu Viswambharan authored 
      

When EL3 exception handling is in effect (i.e.,
EL3_EXCEPTION_HANDLING=1), Non-secure interrupts can't preempt Secure
execution. However, for yielding SMCs, preemption by Non-secure
interupts is intended.

This patch therefore adds a call to ehf_allow_ns_preemption() before
dispatching a Yielding SMC to TSP.

Change-Id: Ia3a1ae252f3adc0f14e6d7e0502f251bdb349bdf
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      1dd022ca
  9. 29 Jan, 2018 1 commit
  11. 10 Jan, 2018 1 commit
  13. 09 Jan, 2018 1 commit
  15. 08 Jan, 2018 2 commits
  17. 12 Dec, 2017 1 commit
    • Sandrine Bailleux's avatar
      SPM: Fix MM_COMMUNICATE_AARCH32/64 parameters · 4d2787ce
      Sandrine Bailleux authored 
      This partially reverts commit d6b532b5

, keeping only the fixes to
the assertions. The changes related to the order of arguments passed
to the secure partition were not correct and violated the
specification of the SP_EVENT_COMPLETE SMC.

This patch also improves the MM_COMMUNICATE argument validation.  The
cookie argument, as it comes from normal world, can't be trusted and thus
needs to always be validated at run time rather than using an assertion.

Also validate the communication buffer address and return
INVALID_PARAMETER if it is zero, as per the MM specification.

Fix a few typos in comments and use the "secure partition" terminology
rather than "secure payload".

Change-Id: Ice6b7b5494b729dd44611f9a93d362c55ab244f7
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      4d2787ce
  19. 06 Dec, 2017 3 commits
  21. 05 Dec, 2017 2 commits
  23. 20 Nov, 2017 2 commits
  25. 15 Nov, 2017 2 commits
  27. 13 Nov, 2017 3 commits
  29. 10 Nov, 2017 1 commit
    • Antonio Nino Diaz's avatar
      SPM: Fix pointer to MP info in boot info struct · ff7d0805
      Antonio Nino Diaz authored 
      

The MP info struct is placed right after the boot info struct. However,
when calculating the address of the MP info, the size of the boot info
struct was being multiplied by the size of the MP boot info. This left
a big gap of empty space between the structs.

This didn't break any code because the boot info struct has a pointer to
the MP info struct. It was just wasting space.

Change-Id: I1668e3540d9173261968f6740623549000bd48db
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      ff7d0805
  31. 08 Nov, 2017 2 commits
    • Antonio Nino Diaz's avatar
      SPM: Introduce Secure Partition Manager · 2fccb228
      Antonio Nino Diaz authored 
      

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: default avatarAchin Gupta <achin.gupta@arm.com>
Co-authored-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      2fccb228
    • Antonio Nino Diaz's avatar
      spd: Use `ENABLE_ASSERTIONS` instead of `DEBUG` · 92cad5fa
      Antonio Nino Diaz authored 
      A line in the upstream SPDs is only compiled in in `DEBUG` builds. This
line is used to help with assertions and so assertion failures can
happen in release builds with assertions enabled. Use
`ENABLE_ASSERTIONS` instead of `DEBUG`.

This bug was introduced in commit aa61368e

, which introduced the build
option `ENABLE_ASSERTIONS`.

Change-Id: I7977df9c89c68677b00099b2a1926fa3cb0937c6
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      92cad5fa
  33. 19 Sep, 2017 1 commit
    • Aijun Sun's avatar
      trusty: save/restore FPU registers in world switch · ab609e1a
      Aijun Sun authored 
      

Currently, Trusty OS/LK implemented FPU context switch in internal
thread switch but does not implement the proper mechanism for world
switch. This commit just simply saves/restores FPU registes in world
switch to prevent FPU context from being currupted when Trusty OS uses
VFP in its applications.

It should be noted that the macro *CTX_INCLUDE_FPREGS* must be defined
in trusty.mk if Trusty OS uses VFP
Signed-off-by: default avatarAijun Sun <aijun.sun@spreadtrum.com>
      ab609e1a
  35. 24 Aug, 2017 1 commit
  37. 09 Aug, 2017 1 commit
    • Edison Ai's avatar
      Support paging function for OPTEE. · d59a6acc
      Edison Ai authored 
      

ARM TF need transfer information about pageable image load address
and memory limit to OPTEE. OPTEE will relocate the pageable image
to where it's needed.
The legacy OP-TEE images that do not include header information
are not affected.

Change-Id: Id057efbbc894de7c36b2209b391febea4729c455
Signed-off-by: default avatarEdison Ai <edison.ai@arm.com>
      d59a6acc
  39. 12 Jul, 2017 1 commit
    • Isla Mitchell's avatar
      Fix order of #includes · 2a4b4b71
      Isla Mitchell authored 
      

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.

Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: default avatarIsla Mitchell <isla.mitchell@arm.com>
      2a4b4b71
  41. 14 Jun, 2017 1 commit
  43. 04 May, 2017 1 commit
  45. 03 May, 2017 1 commit
  47. 26 Apr, 2017 1 commit
  49. 20 Apr, 2017 1 commit
    • Antonio Nino Diaz's avatar
      tspd:FWU:Fix usage of SMC_RET0 · 7a317a70
      Antonio Nino Diaz authored 
      

SMC_RET0 should only be used when the SMC code works as a function that
returns void. If the code of the SMC uses SMC_RET1 to return a value to
signify success and doesn't return anything in case of an error (or the
other way around) SMC_RET1 should always be used to return clearly
identifiable values.

This patch fixes two cases in which the code used SMC_RET0 instead of
SMC_RET1.

It also introduces the define SMC_OK to use when an SMC must return a
value to tell that it succeeded, the same way as SMC_UNK is used in case
of failure.

Change-Id: Ie4278b51559e4262aced13bbde4e844023270582
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      7a317a70
  51. 06 Mar, 2017 5 commits