GitLab

* EKS blob size was not passed by as a boot parameter
  earlier. Its being passed now
* If EKS value sent by bootloader is non-zero
  update the boot parameter from default value to the argument
  passed by bootloader

Change-Id: I65a3091bd2c1c908cc9e81c0aab6489cab02c098
Signed-off-by: Akshay Sharan <asharan@nvidia.com>

DRBG must be initialized to guarantee SRK has a random
value during suspend. This patch add a sequence to generate
an SRK on boot and during resume for SE1 and SE2. This SRK
value is not saved to PMC scratch, and should be overwitten
during atomic suspend.

Change-Id: Id5e2dc74a1b462dd6addaec1709fec46083a6e1c
Signed-off-by: Sam Payne <spayne@nvidia.com>

This patch adds the driver to communicate with the BPMP processor
for power management use cases. BPMP controls the entry into cluster
and system power states. The Tegra210 platform port queries the BPMP
to calculate the target state for the cluster. In case BPMP does not
allow CCx entry, the core enters a power down state.

Change-Id: I9c40aef561607a0b02c49b7f8118570eb9105cc9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes MISRA defects for the MCE driver.

* Using logical NOT for bool type function
* Using MPIDR_AFFLVL_MASK << MPIDR_AFFINITY_BITS replace
  MPIDR_CLUSTER_MASK

Change-Id: I97e96f172a3c1158646a15a184c273c53a103d63
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch uses int32_t to replace ints, to fix Rule 4.6 of the
MISRA standard.

Change-Id: I20ac6185929eced684b43da3ef1f8cd5fbddc83d
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds (void) for unused function parameters to
fix Rule 2.7 of the MISRA standard.

Change-Id: Ibc3f10b3bfe73363383b4c28413ab8d99fbc8c89
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the implementation of the SE atomic context save
sequence. The atomic context-save consistently saves to the TZRAM
carveout; thus there is no need to declare context save buffer or
map MMU region in TZRAM for context save. The atomic context-save
routine is responsible to validate the context-save progress
counter, where CTX_SAVE_CNT=133(SE1)/646(SE2), and the SE error
status to ensure the context save procedure complete successfully.

Change-Id: Ic80843902af70e76415530266cb158f668976c42
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

* Expressions resulting from the expansion of macro parameters
  shall be enclosed in parentheses [Rule 20.7]
* Added explicit casts (e.g. 0U) to integers in order for them
  to be compatible with whatever operation they're used in [Rule
  10.1]
* Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: Ia83c3ab6e4c8c03c19c950978a7936ebfc290590
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds capability to read the boot flag to enable L2 ECC
and Parity Protection bit for the Cortex-A57 CPUs. The previous
bootloader sets this flag value for the platform.

* with some coverity fix:
MISRA C-2012 Directive 4.6
MISRA C-2012 Rule 2.5
MISRA C-2012 Rule 10.3
MISRA C-2012 Rule 10.4

Change-Id: Id7303bbbdc290b52919356c31625847b8904b073
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sets up the clock for the UART console, for real Silicon
and FPGA platforms. FPGA platforms run the UART clock source at
13MHz, whereas the clock cource runs at 408MHz for real silicon.

Change-Id: Ibfd99df032ec473f29e636e597cfc95a0f580598
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds helper functions to find out the chip ID of the
Tegra SoC.

Change-Id: Ia3901dc7cdf77d8c23884d1ed38a80dba6a8afde
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The platform code generates the power domain tree. The handler to
retrieve the tree should also reside in the platform code.

This patch moves the plat_get_power_domain_tree_desc() to the
individual platforms.

Change-Id: Iaafc83ed381d83129501111ef655e3c58a8a553f
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for simulation platforms as well as
fixes issues flagged by the MISRA scans.

Main MISRA fixes:

* Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]
* Fix return type doesn't match the function type [Rule 10.3]
* Use single return point instead of multiple [Rule 15.5]
* Change return type for the tegra_platform_is_x handlers to bool

Change-Id: I871b7c37b22942f6c0c2049c14cc626d4a24d81c
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

synquacer: add SPM support

Move BL1 and BL2 private defines to bl_common.h

make lpuart and imx uart work for debug mode

Correct typographical errors

plat/arm: Fix header dependencies

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

On some systems, it may be preferred to place the secure EL1/0 vector
table outside of the static placement of the BL31 image itself, for
instance when the latter is located in non-shareable SRAM which does
not tolerate inner shareable WBWA mappings (as is the case on SynQuacer)

So permit the platform to #define SPM_SHIM_EXCEPTIONS_VMA in its
supplementary linker script, in which case it will be used as the
VMA region for the vector table. Note that the LMA does not change,
and it is up to the platform to copy the contents to the right place
at init time.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Registered init handlers return a boolean int, not a return code,
so convert the result from the SPM init call before returning it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Permit unaligned accesses while executing the secure partition
payload, so that we don't have to modify existing code that we
will host there. (The UEFI spec explicitly permits unaligned
accesses)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Corrects typos in core code, documentation files, drivers, Arm
platforms and services.

None of the corrections affect code; changes are limited to comments
and other documentation.

Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.

This also prevents problems like cyclic dependencies.

Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.

Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

build: Support BL-specific build flags

xlat v2: Dynamically detect need for CnP bit

Jh/hikey

maintainers: Add maintainter for NXP i.MX8M platform.

doc: Minor reword & reformatting in readme.rst

With DEBUG_CONSOLE enabled, build will fail for imx8mq platform:

./build/imx8mq/release/bl31/imx8mq_bl31_setup.o:
In function `bl31_early_platform_setup2':
imx8mq_bl31_setup.c:(.text.bl31_early_platform_setup2+0x40):
	undefined reference to `console_uart_register'
Makefile:741: recipe for target 'build/imx8mq/release/bl31/bl31.elf' failed
make: *** [build/imx8mq/release/bl31/bl31.elf] Error 1

Besides, the .console_flush callback needs to be added to avoid
panic when debug mode is enabled, since the console_flush() will
call it without checking whether the function callback is valid.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Current lpuart driver does NOT implement .console_flush callback,
if debug console is enabled, the console_flush() will call the
undefined .console_flush callback(NULL) for lpuart and leak to
panic, this patch adds .console_flush callback to make lpuart work
for debug mode.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

This patch adds me to various maintainer activities in
the ATF tree associated with the NXP i.MX8M platform.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

Improves wording and sentence structure of the readme, including:

- Using "TF-A" in place of "the TF-A" in a couple of places
- "Support for X" in place of "Support X"
- Explicitly naming the Secure Payload Dispatcher when introducing the
  SPD acronym.

Change-Id: I4e7b7e7dc6748f631d07c02d97adcca10ae60ea4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I7e0ba692277c1c120c86d47ab966dcd11682428a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Currently the examples of Arm interface standards all include
abbreviationsof the full names, except for SCMI.

Change-Id: I8417ada780d51ecf93426aa5d265c507c7dac08c
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

ARMv8.2-TTCNP is mandatory from ARMv8.2 onwards, but it can be implemented
in CPUs that don't implement all mandatory 8.2 features (and so have to
claim to be a lower version).

This patch removes usage of the ARM_ARCH_AT_LEAST() macro and uses system
ID registers to detect whether it is needed to set the bit or not.

Change-Id: I7bcbf0c7c937590dfc2ca668cfd9267c50f7d52c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I7194a9a5f0e41308eb3242d20c0d3434f72da591
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.

Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>