GitLab

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I51f2285a79f202cb2ca9f031044002e16dd1e92f

Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I21b8fda855aa69090b85d6aaf411e19560201cb5

The calls are just passed through to the PMU-FW. Before issuing
other pinctrl functions the pin should be successfully requested.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibce280edebedf779b3962009c274d0b3d928e0e4

In pm_query_data() function return type is stored in response so
there is no use of return type. Update return type of function
pm_query_data() from enum pm_ret_status to void. Similarly
update return type of pm_api_clock_get_name() and
pm_api_pinctrl_get_function_name() functions.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Id811926f0b4ebcc472480bb94f3b88109eb036cd

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Icef550072296d6aba89a0827dd72d0b86047556f

Current implementation doesn't support change of div1 value if clk
has 2 divisor because div1 clk is the parent of the div2 clk and div2
clk does not have SET_RATE_PARENT flag.
This causes div1 value to be fixed and only value of div2 will be
adjusted according to required clock rate.

Example:
 Consider a case of nand_ref clock which has 2 divisor and 1 mux.
 The frequency of mux clock is 1500MHz and default value of div1 and
 div2 is 15 and 1 respectively. So the final clock will be of 100MHz.
 When driver requests 80MHz for nand_ref clock, clock framework will
 adjust the div2 value to 1 (setting div2 value 2 results final clock
 to 50MHz which is more inaccurate compare to 100Mhz) which results
 final clock to 100MHz.
 Ideally the value of div1 and div2 should be updated to 19 and 1
 respectively so that final clock goes to around 78MHz.

This patch fixes above problem by allowing change in div1 value.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibb98f6748d28653fdd1e59bf433b6a37ce9c1a58

This patches copies only the valid part of string and
avoids filling junk at the end.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If23772f31f9cf7f5042e8bfc474fbfe77dcd90e7

Add support of register notifier.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I41ef4c63abcc9aee552790b843adb25a5fd0c23e

Add support to get clock's rate value.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3ed881053ef323b2ca73e13edd0affda860d381d

Add support of set max latency, to change in the maximum powerup latency
requirements for a specific device currently used by Subsystem.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I8749886abb1a7884a42c4d156d89c9cd562a5b1a

Add support to call InitFinalize API in Versal which calls
corresponding LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3428b7245b4db1ef6db8a90b7ad20b6e484ed3b2

For the current XilPM calls, The handler of IPI returns information
with 16 Bytes data.
So during QueryData API call for the ClockName and PinFunctionName,
response data(name of clock or function) response[0..3] are used to
return name. And status is not being returned for such API.

Updated XilPM calls reply in a consistent way and The handler of IPI
return information with 32Bytes data. Where response[0] always set
to status.
For the version-2 of QueryData API, during call for the ClockName
and PinFunctionName, response data(name of clock or function) get as
response[1...4].

To support both the version of QueryData API, added version based
compatibility by the use of feature check.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I336128bff7bbe659903b0f8ce20ae6da7e3b51b4

In JTAG mode check the ATF handoff structure, if the magic string
is not present then use bl32 and bl33 default values.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I1f2c4a2060d8a2e70d3b5fb2473124b685f257fc

Versal firmware adds extra error codes along with PM error codes
while sending response to driver. This makes incorrect error
identification at driver side.

To fix this, mask the unnecessary error bytes before sending the
error code to the driver.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I18c2f3bd2d067e91344852c2f0c1bafea0e6eb23

GIC registers needs to be stored/restored during system
suspend/resume only and not during CPU idle.
During CPU idle, minimum 1 CPU is in ON state.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I5de2ce3a61bf4260f9385349202b0f592a47aaba

Add below API in feature check list which is actually present in
firmware:
- PM_GET_CHIPID
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98b82da74164f065c8835861f74b0f2855e9bcbf

Existing code passes ACPU0 to LibPM as node_id in set_wakeup_source()
call because last suspending core will be ACPU0 in most of the case.

Now it may be possible that user may disable the ACPU0 using hot-plug
and after that it suspends Linux. So in that case ACPU0 will not be
last suspending core.

To overcome above scenario, pass the current running processor ID
while calling set_wakeup_source().
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If15354c2150b5bb1305b5f93ca4e8c7a81d59f0a

Save some space by enabling the log messages like bl33 address
only for debug builds. Also check the bl33 and bl32 address and
print only if this is not NULL.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I58d846bf69a75e839eb49abcbb9920af13296886

For boot health status PMU Global General Storage Register 4 is
used. GGS4 can be used for other purpose along with boot health
status. So, change its name from PM_BOOT_HEALTH_STATUS_REG
to PMU_GLOBAL_GEN_STORAGE4.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I2f5c4c6a161121e7cdb4b9f0f8711d0dad16c372

Update the xilinx platform makefile to include GICv2 makefile
instead of adding the individual files. Updating this change
as per the latest changes done in the commit #1322dc94

.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I79d8374c47a7f42761d121522b32ac7a5021ede8

From GCC-9 implementation of switch case was generated through jump tables,
because of which we are seeing 1MB increase in rodata section. To reduce
the size we are recommending to use fno-jump-tables.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I069733610809b8299fbf641f0ae35b359a8afd69

All EEMI error codes start with value 2000.

Note: Legacy error codes ARGS (=1) and NOTSUPPORTED (=4) returned by
current ATF code have been left in place.
Signed-off-by: Davorin Mista <davorin.mista@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I939afa85957cac88025d82a80f9f6dd49be993b6

Linux clock framework cannot properly deal with these errors. When the
error is related to the lack of permissions to control the clock we
filter the error and report the success to linux. Before recent changes
in clock framework across the stack, this was done in the PMU-FW as a
workaround. Since the PMU-FW now handles clocks and the permissions to
control them using general principles rather than workarounds, it can
no longer distinguish such exceptions and it has to return no-access
error.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I1491a80e472f44e322a542b29a20eb1cb3319802

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.

Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I9f8b55414ab7965e431e3e86d182eabd511f32a4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

pm_get_callbackdata() expect result count and not total bytes of
result. Correct it by passing result count to pm_get_callbackdata().
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I01ce0002f7a753e81ea9fe65edde8420a13ed51a

To find result count use ARRAY_SIZE for better readability.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I97201de4d43024e59fa78bd61937c86d47724ab5

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I76f5535f1cbdaf3fc1235cd824111d9afe8f7e1b

Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443

ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0

Signed-off-by: Norbert Werner <opensource@lab-w.org>
Change-Id: I3264515e5901689328861964ff664ff08b6e852c

Move pm_client.h to common directory to avoid duplication
of function declaration.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea542e681f42db089cccd9b24d286ac8f0a2ce35

This patch makes default build target as silicon instead of QEMU.
The default can be overwritten by specifying it through build flag
VERSAL_PLATFORM.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia4cb1df1f206db3e514e8ce969acca875e973ace

Add new option for serial and default clock setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I0ca7ad51637cdaa6bb891f22c53595d20da7236a

ATF can't fit in current OCM size when the DEBUG is enabled, so
increase the OCM size to use 128Kb.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I2ebfd1f2e9db9c0b28770aea7f8fbf1a8a15787a

The IOU switch clock will be set by PLM during boot so there is no need to
set here and hence this patch removes it.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1512708411eb07a07c1a8fbd66575efee975431a