GitLab

sgi/sgm: add a second maintainer for Arm's SGI and SGM platforms

Add a second maintainer for Arm's SGI and SGM platform support in
trusted firmware to handle the review and maintenance of
existing and upcoming platforms.

Change-Id: Ie7fa8da280d9351f7543122fb261d6ac6c7e15ad
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

GICv3: Allow probe for fewer GICR interfaces than exposed by the frame

plat: intel: Add BL2 support for Stratix 10 SoC

Previously the GICv3 redistributor probe function
(gicv3_rdistif_base_addrs_probe()) asserted that the number of
per-CPU redistributor interfaces expected to be probed by the
platform is equal to the number exported by the redistributor
frame. This is a problem in case the number of CPUs in the
platform is less than the number of redistributor interfaces
in the frame. Hence this patch removes the assertion check
and allows probe for fewer redistributor interfaces as required
by the platform.

Change-Id: I3449763a3ad70817224442cbe184d001030c9874
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Fixes related to BL33 image on Arm platforms

RPi3 SDHost driver

This adds BL2 support for Intel Stratix 10 SoC FPGA.
Functionality includes:
- Release and setup peripherals from reset
- Calibrate DDR
- ECC DDR Scrubbing
- Load FIP (bl31 and bl33)
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

Remove dead code related to LOAD_IMAGE_V2=0

hikey960: EDMAC: leave channel 0 as secure

The BL33 image must not go past the end of DRAM.

Change-Id: I56668ab760d82332d69a8904d125d9a055aa91d5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base
address, it is an absolute address. Rename it to avoid any confusion.

Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

This patch adds myself to co-maintainer list of Raspberry Pi 3
platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

This patch inits SDHost in BL2 earlysetup. BL2 can start operating mmc
commands to read/write MMC raw blocks.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

This commit adds SDHost driver for RaspberryPi3. SDHost driver uses the
GPIO driver to connect the SDCard and SDHost. By using this driver it is
able to read/write raw blocks on SDCard.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

User Guide: Move ARM_PLAT_MT doc to Arm build flags

ARM_PLAT_MT build flag is specific to Arm platforms so should not
be classified as a common build option.

Change-Id: I79e411958846759a5b60d770e53f44bbec5febe6
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Commit ed51b51f

 ("Remove build option LOAD_IMAGE_V2") intended
to remove all code related to LOAD_IMAGE_V2=0 but missed a few things.

Change-Id: I16aaf52779dd4af1e134e682731328c5f1e5d622
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Channel 0 is used to communicate with LPM3, a coprocessor
for power management. Leave it as secure.
Signed-off-by: Ryan Grachek <ryan@edited.us>

doc: Fix broken code blocks in coding guidelines

Sections 2.2, 2.3 and 2.4 contained example code blocks that were not
being formatted properly due to missing newlines.

Change-Id: I0dbce90c931cf69e4f47d2ccbcc8bc0e20f8fd66
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Remove support for the SMC Calling Convention 2.0

Armada8k GPIO Register macro fix

Arm/master/fixes v2.0.0

lib/xlat_tables: Add support for ARMv8.4-TTST

Move coding guidelines into docs directory

mmc: correctly check ret in mmc_fill_device_info

This reverts commit 2f370465

 ("Add support for the SMC Calling
Convention 2.0").

SMCCC v2.0 is no longer required for SPM, and won't be needed in the
future. Removing it makes the SMC handling code less complicated.

The SPM implementation based on SPCI and SPRT was using it, but it has
been adapted to SMCCC v1.0.

Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and
VSTCR_EL2.

This feature is supported in AArch64 state only.

This patch adds support for this feature to both versions of the
translation tables library. It also removes the static build time
checks for virtual address space size checks to runtime assertions.

Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

rockchip: Fix GICv2 interrupts

Add power optimization for i.MX8QM/i.MX8QX

rpi3: Remove duplicate initialization for BL32_IMAGE_ID and mark one more function as static.

Change some vars and functions to be static.

tools/fiptool: Fix UUID parsing in blob handling

This patch adds more details on #include directive use, including (pun
not intended) the desired ordering, grouping and variants (<> or "").

Change-Id: Ib024ffc4d3577c63179e1bbc408f0d0462026312
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This patch attempts to make the guidelines clearer by reordering
the sections and grouping similar topics.

Change-Id: I1418d6fc060d6403fe3e1978f32fd54b8793ad5b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Adds a link from user-guide.rst to coding-guidelines.rst and merges
the information about using checkpatch from both files into the user
guide document.

Change-Id: Iffbb4225836a042d20024faf28b8bdd6b2c4043e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I083f673f37495d2e53c704a43a0892231b6eb281
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: Id0e6d272b6d3d37eab785273f9c12c093191f3fc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This content has been imported and adapted from the TF GitHub wiki
article 'ARM-Trusted-Firmware-Coding-Guidelines'.

The aim is to increase the visibility of the coding guidelines by
including them as part of the documentation that is within the TF
repository.

Additionally, the documentation can then be linked to by other
documents in the docs/ directory without worrying about broken links
to, for example, the external wiki.

Change-Id: I9d8cd6b5117b707c1a113baeba7fc5e1b4bf33bc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>