GitLab

The STM32 platform port parse DT nodes to find base address to
peripherals. It does this by using its own implementation, even though
this functionality is generic and actually widely useful outside of the
STM32 code.

Re-implement fdt_get_reg_props_by_name() on top of the newly introduced
fdt_get_reg_props_by_index() function, and move it to fdt_wrapper.c.
This is removes the assumption that #address-cells and #size-cells are
always one.

Change-Id: I6d584930262c732b6e0356d98aea50b2654f789d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The STM32 platform code uses its own set of FDT helper functions,
although some of them are fairly generic.

Remove the implementation of fdt_read_uint32_default() and implement it
on top of the newly introduced fdt_read_uint32() function, then convert
all users over.

This also fixes two callers, which were slightly abusing the "default"
semantic.

Change-Id: I570533362b4846e58dd797a92347de3e0e5abb75
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The device tree parsing code for the STM32 platform is using its own FDT
helper functions, some of them being rather generic.
In particular the existing fdt_read_uint32_array() implementation is now
almost identical to the new generic code in fdt_wrappers.c, so we can
remove the ST specific version and adjust the existing callers.

Compared to the original ST implementation the new version takes a
pointer to the DTB as the first argument, and also swaps the order of
the number of cells and the pointer.

Change-Id: Id06b0f1ba4db1ad1f733be40e82c34f46638551a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.

The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.

PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.

BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.

Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This issue was found with cppcheck in our downstream code:
[drivers/st/io/io_stm32image.c:234] -> [drivers/st/io/io_stm32image.c:244]:
 (warning) Either the condition 'buffer!=0U' is redundant or there is
 possible null pointer dereference: local_buffer.

Change-Id: Ieb615b7e485dc93bbeeed4cd8bf845eb84c14ac9
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The variable is wrongly set to 0L, whereas it is an unsigned int, it should
then be 0U.

Change-Id: I0b164c0ea598ec8a503f1693da2f3789f59da238
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Sparse issue:
drivers/st/spi/stm32_qspi.c:445:5:
 warning: symbol 'stm32_qspi_init' was not declared. Should it be static?

Cppcheck issue:
[drivers/st/spi/stm32_qspi.c:175] -> [drivers/st/spi/stm32_qspi.c:187]:
 (style) Variable 'len' is reassigned a value before the old one has been
 used.
[drivers/st/spi/stm32_qspi.c:178]:
 (style) The scope of the variable 'timeout' can be reduced.

Change-Id: I575fb50766355a6717cbd193fc4a80ff1923014c
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: Iea6ca26ff4903c33f0fad27fec96fdbabd4e0a91
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Add QSPI support (limited to read interface).
Implements the memory map and indirect modes.
Low level driver based on SPI-MEM operations.

Change-Id: Ied698e6de3c17d977f8b497c81f2e4a0a27c0961
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Add fmc2_nand driver support. The driver implements
only read interface for NAND devices.

Change-Id: I3cd037e8ff645ce0d217092b96f33ef41cb7a522
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

IO seek offset can be set to values above UINT32_MAX, this change
changes the seek offset argument from 'ssize_t' to 'signed long long'.
Fixing platform seek functions to match the new interface update.

Change-Id: I25de83b3b7abe5f52a7b0fee36f71e60cac9cfcb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Change-Id: I84f8a99be2dcdf7c51fbecdb324df8e2f32cc855
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This commit adds authentication binary support for STM32MP1.
It prints the bootrom authentication result if signed
image is used and authenticates the next loaded STM32 images.
It also enables the dynamic translation table support
(PLAT_XLAT_TABLES_DYNAMIC) to use bootrom services.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iba706519e0dc6b6fae1f3dd498383351f0f75f51

This BSEC service is a platform specific service. Implementation
moved to the platform part.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9

The driver manages the HASH processor IP on STM32MP1
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I3b67c80c16d819f86b951dae29a6c465e51ad585

The STM32 console driver was pre-pending '\r' before '\n'.
It is now managed by the framework with the flag:
CONSOLE_FLAG_TRANSLATE_CRLF.
Remove the code in driver, and add the flag for STM32MP1.

Change-Id: I5d0d5d5c4abee0b7dc11c2f8707b1b5cf10149ab
Signed-off-by: Yann Gautier <yann.gautier@st.com>

DBLOCKSIZE should be filled such as the data size is 2^DBLOCKSIZE.
Hence it is calculated with __builtin_ctz.

Change-Id: Id6b5ff9b594afc4fc523a388011beed307e6abd1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

If the max-frequency property is provided in the device tree mmc node,
it should be managed. The max allowed frequency will be the min between
this property value and what the card can support.

Change-Id: I885b676c3300d2670a0fe4c6ecab87758b5893ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.

Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This change enables LpDDR3 initialization with PMIC.

Change-Id: I2409a808335dfacd69a8517cb8510cee98bb8161
Signed-off-by: Yann Gautier <yann.gautier@st.com>

To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.

Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

In order to correctly manage the bring-up of non boot CPUs, the RTCAPB
clock needs to be enabled.
It controls the access to backup registers, where the CPU entrypoint
will be stored.

Change-Id: Ifeeceb4faf64bc9e0778030444f437cc0bb27272
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.

The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.

An increase of BL2 size is also required when adding this new code.

Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.

The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.

Device tree files are also updated to manage vdd-supply regulator.

Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

To activate the CSG option, the driver needs to set the bit2
of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator.
This bit should not be cleared when starting the PLL.

Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.

Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.

The mask value is also corrected for QSPI and FMC clock selection.

Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.

The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.

Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.

Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The old version of the macro is deprecated.

Commit cc5859ca

 ("Multi-console: Deprecate the
`finish_console_register` macro") provides more details.

Change-Id: I3d1cdf6496db7d8e6cfbb5804f508ff46ae7e67e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

STM32MP1 SDMMC device voltage is 3.3V. We should then precise the 2 ranges
3.2 to 3.3V and 3.3 to 3.4V in ocr_voltage field.

Change-Id: I88e479f8f16bfe608a7808eace0df3fdec48deab
Signed-off-by: Yann Gautier <yann.gautier@st.com>

STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4.
The support for Cortex-M4 clocks is added when configuring the clock tree.
Some minimal security features to allow communications between A7 and M4
are also added.

Change-Id: I60417e244a476f60a2758f4969700b2684056665
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Remove useless private structure in function prototypes.
Add a reference counter on clocks.
Prepare for future secured/shared/non-secured clocks.

Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

This change makes the platform to panic in case of peripheral reset
resource malfunction.

Change-Id: I17eb9cb045b78a4e5142a8c33b744e84992d732a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.

Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

Create a new file stm32mp_clkfunc.c to put functions that could be common
between several platforms.

Change-Id: Ica915c796b162b2345056b33328acc05035a242c
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.

Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.

Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

Remove the previously use function: get_timer, and use new functions
timeout_init_us and timeout_elapsed.

Change-Id: I4e95b123648bff7ca91e40462a2a3ae24cfe1697
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.

Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.

Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.

stm32mp_common.h is a common API aggregate.

Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.

Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>