GitLab

* changes:
  Docs fixes
  Update security documentation

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.

Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

1) Fix links in "about" page
2) Put back the "contents" page with adjusted links

Change-Id: Id09140b91df5cf0a275149801d05d8cfeeda1c6e
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

1) Replace references to "Arm Trusted Firmware" with "TF-A"
2) Update issue tracker link

Change-Id: I12d827d49f6cc34e46936d7f7ccf44e32b26a0bd
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  doc: Use proper note and warning annotations
  doc: Refactor contributor acknowledgements
  doc: Reorganise images and update links
  doc: Set correct syntax highlighting style
  doc: Add minimal glossary
  doc: Remove per-page contents lists
  doc: Make checkpatch ignore rst files
  doc: Format security advisory titles and headings
  doc: Reformat platform port documents
  doc: Normalise section numbering and headings
  doc: Reword document titles

Payload length of the get dram mapping information message is 0.
The mbx_mem->len parameter should be 4, it only contains
message header.

Fixes: b67d2029

 ("plat/synquacer: enable SCMI support")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: If1cd4c855da2dc5dc4b6da3bea152b8441971de7

The documentation contains plenty of notes and warnings. Enable
special rendering of these blocks by converting the note prefix
into a .. note:: annotation.

Change-Id: I34e26ca6bf313d335672ab6c2645741900338822
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

- Make the list of contributors into an actual list
- Use note syntax for the note
- Remove the Individuals heading since there are none

This file could be considered for removal as it is a legacy
document, as its note explains.

Change-Id: Idf984bc192af7a0ec367a6642ab99ccccf5df1a8
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I679d1499376a524bef1cfc33df995b0a719b5ac8
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Several code blocks do not specify a language for syntax
highlighting. This results in Sphinx using a default highlighter
which is Python.

This patch adds the correct language to each code block that doesn't
already specify it.

Change-Id: Icce1949aabfdc11a334a42d49edf55fa673cddc3
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

One of the current issues with the documentation is that terms and
abbreviations are frequently redefined. For example, we might have
a sentence like "... the SCP (System Control Processor) will ...".

These definitions might be repeated several times across pages, or
even within the same document. Equally, some of these abbreviations
are missed and are never expanded.

Sphinx provides a :term: keyword that takes some text and,
if that text is defined in a glossary document, links to its glossary
entry. Using this functionality will prevent repeated definitions
and will make the docs more maintainable by using a single
definition source.

The glossary added in this patch was created from a quick scrub of
the source code - there may be missing entries. The SDEI abbreviation
was used as an example.

Note that a global_substitutions file was created. This file contains
the RST 'replace' statements that convert plain text terms into linked
terms (by adding the ':term:' keyword to them). An example is:

.. |TF-A| replace:: :term:`TF-A`

The 'rst_prolog' variable in conf.py is used to inject this list of
replacements into each page. Terms must be surrounded with the pipe
character to be turned into links - this means that we can still
prevent certain terms from being linked if we don't want them to be.

Change-Id: I87010ed9cfa4a60011a9b4a431b98cb4bb7baa28
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

These are no longer needed as there will always be a table of contents
rendered to the left of every page.

Some of these lists can be quite long and, when opening a page, the
reader sees nothing but a huge list of contents! After this patch,
the document contents are front-and-centre and the contents are
nicely rendered in the sidebar without duplication.

Change-Id: I444754d548ec91d00f2b04e861de8dde8856aa62
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Previously checkpatch was invoked with options to make it ignore
Markdown (md) files as this was the dominant format for TF-A
documents. Now that rst is being used everywhere this option needs
updating.

Change-Id: I59b5a0bcc45d2386df4f880b8d333baef0bbee77
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Required so that the advisory documents are all valid RST files (with a
header) and that they all integrate into the document tree.

Change-Id: I68ca2b0b9e648e24b460deb772c471a38518da26
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The platform port documents are not very standardised right now and
they don't integrate properly into the document tree so:

1) Make sure each port has a proper name and title (incl. owner)
2) Correct use of headings, subheadings, etc in each port
3) Resolve any naming conflicts between documents

Change-Id: I4c2da6f57172b7f2af3512e766ae9ce3b840b50f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Required work to make all documents sit at the correct levels within
the document tree and any derived content like the table of contents
and the categories in the sidebar.

Change-Id: I4885fbe30864a87c8822ee67482b71fb46a8fbc6
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This patch attempts to standardise the document titles as well as
adding titles to documents that were missing one. The aim is to
remove needless references to "TF-A" or "Trusted Firmware" in the
title of every document and to make sure that the title matches
with the document content.

Change-Id: I9b93ccf43b5d57e8dc793a5311b8ed7c4dd245cc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

* changes:
  imx8: Replace PLAT_IMX8* with automatic PLAT_imx8*
  plat: imx8mq: Implement IMX_SIP_GET_SOC_INFO

Update M3 Ver.3.0 QoS setting rev.0.03.

Change-Id: I892521d456c606ac3d30f2b2ac6b4e16faa5fc48
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Previously the readme.rst file served as the entrypoint for the
documentation. With a Sphinx build the top-level document is set
to be index.rst as it contains the primary document index.

This patch moves some content from readme.rst into index.rst and
splits the license information out into license.rst.

Change-Id: I5c50250b81136fe36aa9ceedaae302b44ec11e47
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This change creates the following directories under docs/
in order to provide a grouping for the content:

- components
- design
- getting_started
- perf
- process

In each of these directories an index.rst file is created
and this serves as an index / landing page for each of the
groups when the pages are compiled. Proper layout of the
top-level table of contents relies on this directory/index
structure.

Without this patch it is possible to build the documents
correctly with Sphinx but the output looks messy because
there is no overall hierarchy.

Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Add the essentials for supporting a Sphinx documentation build:

- A makefile under docs/ to invoke Sphinx with the desired output
  format
- A Sphinx master configuration file (conf.py)
- A single, top-level index page (index.rst)
- The TF.org logo that is integrated in the the sidebar of the
  rendered output

Change-Id: I85e67e939658638337ca7972936a354878083a25
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I5c06e777d93ac653a853997c2b7c1c9d09b1e49c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

The intention of this patch is to leverage the existing el3_exit() return
routine for smc_unknown return path rather than a custom set of instructions.
In order to leverage el3_exit(), the necessary counteraction (i.e., saving the
system registers apart from GP registers) must be performed. Hence a series of
instructions which save system registers( like SPSR_EL3, SCR_EL3 etc) to stack
are moved to the top of group of instructions which essentially decode the OEN
from the smc function identifier and obtain the specific service handler in
rt_svc_descs_array. This ensures that the control flow for both known and
unknown smc calls will be similar.

Change-Id: I67f94cfcba176bf8aee1a446fb58a4e383905a87
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

* Optimization flags were only provided for debug build.
* Set optimisation level to -O1
* Remove CFLAGS which is never used for romlib
* Remove the ignored -g flag from LDFLAGS

Change-Id: Id4b69026d8a322ed4cb0acf06c350f13d31571ad
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Change-Id: I33c1bf49aa10867e1a2ca4c167112b99bf756dda
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Platform defines are already provided by the build system so let's not
duplicate them.

Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

The manual documents that 0x3036006c should contains the soc revision
for imx8mq but this always reports A0. Work around this by parsing the
ROM header and checking if OCOTP register 0x40 is stuck at 0xff0055aa.

Determining this inside TF-A makes life easier for OS, see for example
this linux discussion: https://lkml.org/lkml/2019/5/3/465



The soc revision can also be useful inside TF-A itself, for example for
the non-upstream DDR DVFS "busfreq" feature is affected by 8mq erratas.

The clock for OCOTP block can be disabled by OS so only initialize soc
revision once at boot time.

Change-Id: I9ca3f27840229ce8a28b53870e44da29f63c73aa
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Remove an assert() that assumes a specific value being passed from
BL2.  This value is dependent on BL2 version, so makes this assert()
not portable.
Suggested-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Change-Id: Ife3d934b2fa37fc1c66963dd4eb1afe2ca17d740