GitLab

Some Allwinner H6 has a broken watchdog that doesn't
make the soc reboot.

Use the R_WATCHDOG instead.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba

Change-Id: I0cb9f0db1ef3491f55c038a10db5a88d37e89697
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

* changes:
  Document changes to auth-framework
  cot-desc: optimise memory further
  Reduce memory needed for CoT description

Change-Id: I0a81f4ea94d41245cd5150de341b51fc70babffe
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

The data structures in the auth-framework were changed by the previous
patch, and need to be updated.

Change-Id: Icfad2ac688d03d32aa93e45f930a375abbc164a9
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.

memory diff:
bl1:        bl2:
    text        text
      -12         -12
    bss         bss
      -1463       0
    data        data
      -56         -48
    rodata      rodata
      -5688       -2592
    total       total
      -7419       -2652

Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].

Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.

Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.

Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.

memory diff:
bl1:        bl2:
    text        text
      -20         -20
    bss         bss
      -1463       0
    data        data
      -256        -48
    rodata      rodata
      -5240       -1952
    total       total
      -6979       -2020

Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

The 'drivers/console/aarch64/console.S' is not needed,
so remove it from build to fix the build error when
'ERROR_DEPRECATED'set.

Change-Id: Id047a355f82fd33298b7e2b49eff289d28eb5b56
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

Replace call to pauth_context_save() with pauth_context_restore()
in case of unknown SMC call.

Change-Id: Ib863d979faa7831052b33e8ac73913e2f661f9a0
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

The change-log.rst file does not use the same symbols
as the other documents when organising its headings,
sub-headings and so on. In order to compile these
documents together with Sphinx, forming a top-level
index and a consistent structure, it is necessary to
normalise these.

Change-Id: Ib4620ff03a9e76fec9e36e95549016c7b3fe12bb
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Remove deprecated interfaces

Now it is needed to use the full path of the common header files.

Commit 09d40e0e

 ("Sanitise includes across codebase") provides more
information.

Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Change-Id: I14fcabbdfd53153d1d5f187f6f8b23a045794408
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Types tzc_action_t and tzc_region_attributes_t are deprecated.

Change-Id: Ieefeb8521a0e1130f39d09b5c0d2728f05084773
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

The old version of the macro is deprecated.

Commit cc5859ca

 ("Multi-console: Deprecate the
`finish_console_register` macro") provides more details.

Change-Id: I3d1cdf6496db7d8e6cfbb5804f508ff46ae7e67e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

The default implementations are defined in crash_console_helpers.S. The
platforms have to define plat_crash_console_*.

Implemented placeholders for platforms that were missing helpers.

Change-Id: Iea60b6f851956916e421dfd8c34a62d96eb9148e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

rcar_gen3: plat: Add R-Car V3M support

SPM: Some improvements to xlat handling code

doc: Update contribution guidelines

Add support for Amlogic s905x (GXL)

Rather than using a fixed virtual address space size, read all regions
in the resource description of each partition and restrict the virtual
address space size to the one the partition actually needs.

This also allows SPM to take advantage of the extension ARMv8.4-TTST if
the virtual address space size is small enough.

Change-Id: I8646aa95e659136b58b44b040364cdee631f7e82
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Right now the virtual address space is fixed to
PLAT_VIRT_ADDR_SPACE_SIZE, so all base translation tables are the same
size and need the same alignment. The current code allocates the exact
space needed by this initial table.

However, a following patch is going to allow each partition to choose
the size of its address space based on the memory regions defined in
their resource description, so it isn't possible to determine this at
build time. As this optimization no longer applies, it has to be
removed.

Change-Id: Ia8d19f4981e1017e4ffe0ba136de73d701044cb0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This gives each Secure Partition complete freedom on its address space.
Previously, the memory used by the exception vectors was reserved and
couldn't be used. Also, it always had to be mapped, forcing SPM to
generate translation tables that included the exception vectors as well
as the Partition memory regions. With this change, partitions can reduce
their address space size easily.

Change-Id: I67fb5e9bdf2870b73347f23bff702fab0a8f8711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Update the documentation for trustedfirmware.org migration

Change-Id: Ibb7052b0becbec3326164f1503806ca2c2fd4dcc
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Also adds a maintainer for GXL.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

GXL platforms need to have a specific header at the beginning of bl31
image to be able to boot. This adds a tool to create that and calls it at
build time.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

On Amlogic gxl (s905x) SOC, in order to use SCP, bl31 has to send bl30
and bl301 firmware along with their SHA256 hash over scpi.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

In order to configure and boot SCP, BL31 has to compute and send
the SHA-256 of the firmware data via scpi. Luckily Amlogic GXL SOC
has a DMA facility that could be used to offload SHA-256
computations. This adds basic support of this hardware SHA-256
engine.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

The Amlogic Meson S905x is a SoC with a quad core Arm Cortex-A53 running
at 1.5Ghz. It also contains a Cortex-M3 used as SCP.

This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux:

- Partial SCPI support.
- Basic PSCI support (CPU_ON, SYSTEM_RESET, SYSTEM_OFF).
- GICv2 driver set up.
- Basic SIP services (read efuse data, enable/disable JTAG).

This port has been tested on a lepotato.
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

Instead of letting the code run until another error is reached, return
early.

Change-Id: I6277a8c65101d3e39b0540099c2a3063584a7dbd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add R-Car V3M support. This is based on the original
V3M support patch for Yocto v2.23.1 by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
---
Marek: Update on top of mainline ATF/master

Arm/master/d3draak v2.0.1

Add QoS tables for R-Car D3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add PFC tables for R-Car D3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add R-Car D3 DDR initialization code. The code is in staging and needs
cleanup, and possibly can even be merged with the E3 init code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add WTCNT register configuration for the D3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add SCIF configuration specifics for the D3 SoC, that is detection
of the D3 SoC and SCBRR configuration.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

The D3 SoC has one CPU core, just return 1 as a CPU number.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>