GitLab

This patch updates all Tegra platforms to use the new multi console API.

Change-Id: I27c0c7830a86e26491dea9991a689f0b01e4dbf0
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>

Now it is needed to use the full path of the common header files.

Commit 09d40e0e

 ("Sanitise includes across codebase") provides more
information.

Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

This patch udpates the SPE console driver to prepend '\r' to
'\n'. This fixes the alignment of prints seen by the host
machines on their UART ports.

Tested by collecting the logs from host PC using Cutecom

Reported by: Mustafa Bilgen <mbilgen@nvidia.com>

Change-Id: I6e0b412bd71ff5eb889582071df8c157da5175ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the state machine to "not present" if the bpmp
firmware is not found in the system during boot. The suspend
handler also checks now if the interface exists, before updating
the internal state machine.

Reported by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

Change-Id: If8fd7f8e412bb603944555c24826855226e7f48c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the PMC's DPD registers on resuming from System
Suspend, for all Tegra210 platforms that support the sc7entry-fw.

Change-Id: I7881ef0a5f609ed28b158bc2f4016abea3c7f305
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

This patch adds suspend and resume handlers for the BPMP
interface. Mark the interface as "suspended" before entering
System Suspend and verify that BPMP is alive on exit.

Change-Id: I74ccbc86125079b46d06360fc4c7e8a5acfbdfb2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to enter System Suspend on Tegra210 platforms
without the traditional BPMP firmware. The BPMP firmware will no longer
be supported on Tegra210 platforms and its functionality will be
divided across the CPU and sc7entry-fw.

The sc7entry-fw takes care of performing the hardware sequence required
to enter System Suspend (SC7 power state) from the COP. The CPU is required
to load this firmware to the internal RAM of the COP and start the sequence.
The CPU also make sure that the COP is off after cold boot and is only
powered on when we want to start the actual System Suspend sequence.

The previous bootloader loads the firmware to TZDRAM and passes its base and
size as part of the boot parameters. The EL3 layer is supposed to sanitize
the parameters before touching the firmware blob.

To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
program PMC's scratch register #210, with appropriate values. Without these
settings the warmboot code wont be able to get the device out of System
Suspend.

Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to find the last standing CPU
in a cluster.

Change-Id: Id018f1958f458c772c7b0c52af8ddf7532b1cec5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds helper functions to help platforms with cluster state entry
and exit decisions.

* tegra_fc_ccplex_pgexit_lock(): lock CPU power ungate
* tegra_fc_ccplex_pgexit_unlock(): unlock CPU power ungate
* tegra_fc_is_ccx_allowed(): CCx state entry allowed on this CPU?

Change-Id: I6490d34bf380dc03ae203eb3028f61984f06931c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the error print displayed when bpmp init
fails. On platforms that do not load the bpmp firmware, this
print is seen on every cluster idle and powerdown request,
cluttering the logs.

Change-Id: I9e30007a913080406052fc32d5360ff70a019d75
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

On earlier Tegra platforms, e.g. Tegra210, the watchdog timer's FIQ interrupt
is not direclty wired to the GICD. It goes to the flow controller instead, for
power state management. But the flow controller can route the FIQ to the GICD,
as a PPI, which can then get routed to the target CPU.

This patch adds routines to enable/disable routing the legacy FIQ used by
the watchdog timers, to the GICD.

Change-Id: Idd07c88c8d730b5f0e93e3a6e4fdc59bdcb2161b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to the bpmp_ipc driver to allow clients to
enable/disable clocks to hardware blocks. Currently, the API only
supports SE devices.

Change-Id: I9a361e380c0bcda59f5a92ca51c86a46555b2e90
Signed-off-by: steven kao <skao@nvidia.com>

This patch removes the usage of this platform config, as it is always
enabled by all the supported platforms.

Change-Id: Ie7adb641adeb3604b177b6960b797722d60addfa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

There are Tegra platforms which have limited UART ports and so
all the components have to share the console. The SPE helps out
by collecting all the logs in such cases and prints them on the
shared UART port.

This patch adds a driver to communicate with the SPE driver, which
in turn provides the console.

Change-Id: Ie750520b936b8bed0ab1d876f03fc0a3490a85a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra SoCs currently do not have a SMMU register at address 0xFFFFFFFF.
This patch changes the search criteria, to look for this marker, to
calculate the size of the saved context.

Change-Id: I15d91945ecb78267f91c45f37985dbb2327ca3ae
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra memctrl driver sets up the TZDRAM fence during boot and
system suspend exit. This patch provides individual platforms with
handlers to perform custom steps during TZDRAM setup.

Change-Id: Iee094d6ca189c6dd24f1147003c33c99ff3a953b
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch returns error if BPMP initialization fails. The platform
code marks the cluster as "runnning" since we wont be able to get
it into the low power state without BPMP.

Change-Id: I86f51d478626240bb7b4ccede8907674290c5dc1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames all the secure scratch registers to reflect their
usage.

This is a list of all the macros being renamed:

- SECURE_SCRATCH_RSV1_* -> SCRATCH_RESET_VECTOR_*
- SECURE_SCRATCH_RSV6 -> SCRATCH_SECURE_BOOTP_FCFG
- SECURE_SCRATCH_RSV11_* -> SCRATCH_SMMU_TABLE_ADDR_*
- SECURE_SCRATCH_RSV53_* -> SCRATCH_BOOT_PARAMS_ADDR_*
- SECURE_SCRATCH_RSV55_* -> SCRATCH_TZDRAM_ADDR_*

NOTE: Future SoCs will have to define these macros to
      keep the drivers functioning.

Change-Id: Ib3ba40dd32e77b92b47825f19c420e6fdfa8b987
Signed-off-by: Steven Kao <skao@nvidia.com>

The Tegra memctrl driver sets up the TZDRAM fence during boot and
system suspend exit. This patch provides individual platforms with
handlers to perform platform specific steps, e.g. enable encryption,
save base/size to secure scratch registers.

Change-Id: Ifaa2e0eac20b50f77ec734256544c36dd511bd63
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the driver to communicate with the BPMP firmware on Tegra
SoCs, starting Tegra186. BPMP firmware is responsible for clock enable/
disable requests, module resets among other things.

MRQ is short for Message ReQuest. This is the general purpose, multi channel
messaging protocol that is widely used to communicate with BPMP. This is further
divided into a common high level protocol and a peer-specific low level protocol.
The higher level protocol specifies the peer identification, channel definition
and allocation, message structure, message semantics and message dispatch process
whereas the lower level protocol defines actual message transfer implementation
details. Currently, BPMP supports two lower level protocols - Token Mail Operations
(TMO), IVC Mail Operations (IMO).

This driver implements the IMO protocol. IMO is implemented using the IVC (Inter-VM
Communication) protocol which is a lockless, shared memory messaging queue management
protocol.

The IVC peer is expected to perform the following as part of establishing a connection
with BPMP.

1. Initialize the channels with tegra_ivc_init() or its equivalent.
2. Reset the channel with tegra_ivc_channel_reset. The peer should also ensure that
   BPMP is notified via the doorbell.
3. Poll until the channel connection is established [tegra_ivc_channel_notified() return
   0]. Interrupt BPMP with doorbell each time after tegra_ivc_channel_notified() return
   non zero.

The IPC driver currently supports reseting the GPCDMAand XUSB_PADCTL hardware blocks. In
future, more hardware blocks would be supported.

Change-Id: I52a4bd3a853de6c4fa410904b6614ff1c63df364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables CPU access configuration register to allow
accesses to the TZRAM aperture on chips after Tegra186.

Change-Id: I0898582f8bd6fd35360ecf8ca5cee21fe35f7aab
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch saves the TZDRAM_BASE value to secure RSVD55
scratch register. The warmboot code uses this register to
restore the settings on exiting System Suspend.

Change-Id: Id76175c2a7d931227589468511365599e2908411
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Introduce platform handlers to program the MSS settings.
This allows the current driver to scale to future chips.

Change-Id: I40a27648a1a3c73b1ce38dafddc1babb6f0b0d9b
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch cleans the Memory controller's interrupt status
register, before exiting to the non-secure world during
cold boot. This is required as we observed that the MC's
arbitration bit is set before exiting the secure world.

Change-Id: Iacd01994d03b3b9cbd7b8a57fe7ab5b04e607a9f
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

This patch moves the TZDRAM base address to SCRATCH55_LO due
to security concerns. The HI and LO address bits are packed
into SCRATCH55_LO for the warmboot firmware to restore.
SCRATCH54_HI is still being used for backward compatibility,
but would be removed eventually.

The scratch registers are populated as:
* RSV55_0 = CFG1[12:0] | CFG0[31:20]
* RSV55_1 = CFG3[1:0]
* RSV54_1 = CFG1[12:0]

Change-Id: Idc20d165d8117488010fcc8dfd946f7ad475da58
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

To deal with upcoming EMC periodic compensation, increase the BPMP timeout
to 2ms.

Change-Id: I8572c031168defd15504d905c4d625f44dd7fa3d
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>

This patch adds an assert in case the dynamic memmap routine fails.

Change-Id: Idd20debbb8944340f5928c6f2cfea973a63a7b1c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

MISRA Rule 10.3, the value of an expression shall not be assigned to
an object with a narrower essential type or of a different essential
type category.

The essential type of a enum member is anonymous enum, the enum member
should be casted to the right type when using it.

Both UL and ULL suffix equal to uint64_t constant in compiler
aarch64-linux-gnu-gcc, to avoid confusing, only keep U and ULL suffix
in platform code. So in some case, cast a constant to uint32_t is
necessary.

Change-Id: I1aae8cba81ef47481736e7f95f53570de7013187
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch adds a hook to get the number of smmu devices and
removes the NUM_SMMU_DEVICES macro.

Change-Id: Ia8dba7e9304224976b5da688b9e4b5438f11cc41
Signed-off-by: Steven Kao <skao@nvidia.com>

Macro assert(e) request 'e' is a bool type, if useing other
type, MISRA report a "The Essential Type Model" violation,
Add a judgement to fix the defects, if 'e' is not bool type.

Remove unused code [Rule 2.5]
Fix the essential type model violation [Rule 10.6, 10.7]
Use local parameter to raplace function parameter [Rule 17.8]

Change-Id: Ifce932addbb0a4b063ef6b38349d886c051d81c0
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Add suffix U for constant [Rule 10.1]

Match the operands type [Rule 10.4]

Use UL replace U for that constant define that need do "~"
operation [Rule 12.4]

Voided non c-library functions whose return types are not used
 [Rule 17.7]

Change-Id: Ia1e814ca3890eab7904be9c79030502408f30936
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch adds the driver for the general purpose DMA hardware
block on newer Tegra SoCs. The GPCDMA is a special purpose DMA
used to speed up memory copy operations to/from DRAM and TZSRAM.

This patch introduces a macro 'USE_GPC_DMA' to allow platforms
to override CPU based memory operations.

Change-Id: I3170d409c83b77e785437b1002a8d70188fabbeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Set MC Clients ordering as per the clients needs(ordered, BW, ISO/non-ISO)
based on the latest info received from HW team as a part of BW issues debug.

SMMU Client config register are obsolete from T186. Clean up the unnecessary
register definitions and programming of these registers.
Cleanup unnecessary macros as well.

Change-Id: I0d28ae8842a33ed534f6a15bfca3c9926b3d46b2
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch fixes the logic to check if Atomics hardware block is powered
on during boot

Reported by: Peter De Schrijver <pdeschrijver@nvidia.com>

Change-Id: I4a6521bcee37225d1402321151c48fa631776b8a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the driver to communicate with the BPMP processor
for power management use cases. BPMP controls the entry into cluster
and system power states. The Tegra210 platform port queries the BPMP
to calculate the target state for the cluster. In case BPMP does not
allow CCx entry, the core enters a power down state.

Change-Id: I9c40aef561607a0b02c49b7f8118570eb9105cc9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.

Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

Main fixes:

* Fixed if/while statement conditional to be essentially boolean [Rule 14.4]

* Added curly braces ({}) around if/for/while statements in order to
  make them compound [Rule 15.6]

* Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]

Change-Id: Ic72b248aeede6cf18bf85051188ea7b8fd8ae829
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch moves the GPU reset state check, during VideoMem resize, to the
common SiP handler, to reduce code duplication.

Change-Id: I3818c5f104b809da83dc2a61d6a8149606f81c13
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>