Skip to content

GitLab

Switch branch/tag
  1. 04 Oct, 2018 1 commit
  3. 28 Sep, 2018 3 commits
  5. 21 Sep, 2018 1 commit
  7. 30 Aug, 2018 4 commits
  9. 22 Aug, 2018 3 commits
  11. 20 Aug, 2018 1 commit
  13. 03 Aug, 2018 1 commit
    • Roberto Vargas's avatar
      Add support for romlib in the build system · 5accce5b
      Roberto Vargas authored 
      

Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..

Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      5accce5b
  15. 13 Jul, 2018 1 commit
    • Sandrine Bailleux's avatar
      Run compiler on debug macros for type checking · cf24229e
      Sandrine Bailleux authored 
      

Even if the log output is too low for a message to be printed out on
the console by the debug macros, it should still be evaluated by the
compiler to get some type checking and validation of the format
specifiers. To do so, introduce the no_tf_log() macro that encloses
the call to tf_log() in an always-false condition.

This avoids the problem of discovering build issues only when we build
the firmware with the right LOG_LEVEL value.

Change-Id: Ic0fd252ab691d0187fd925756a4837aca1cbfd7b
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      cf24229e
  17. 11 Jul, 2018 2 commits
    • Roberto Vargas's avatar
      Add end_vector_entry assembler macro · a9203eda
      Roberto Vargas authored 
      

Check_vector_size checks if the size of the vector fits
in the size reserved for it. This check creates problems in
the Clang assembler. A new macro, end_vector_entry, is added
and check_vector_size is deprecated.

This new macro fills the current exception vector until the next
exception vector. If the size of the current vector is bigger
than 32 instructions then it gives an error.

Change-Id: Ie8545cf1003a1e31656a1018dd6b4c28a4eaf671
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      a9203eda
    • Roberto Vargas's avatar
      Remove .func and .endfunc assembler directives · b2805dab
      Roberto Vargas authored 
      

These directives are only used when stabs debugging information
is used, but we use ELF which uses DWARF debugging information.
Clang assembler doesn't support these directives, and removing
them makes the code more compatible with clang.

Change-Id: I2803f22ebd24c0fe248e04ef1b17de9cec5f89c4
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      b2805dab
  19. 27 Jun, 2018 1 commit
    • Jeenu Viswambharan's avatar
      xlat v2: Split MMU setup and enable · 0cc7aa89
      Jeenu Viswambharan authored 
      

At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.

Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.

This patch addresses both the above problems by:

  - Splitting the MMU-enabling function into two: one that sets up
    values to be programmed into the registers, and another one that
    takes the pre-computed values and writes to the appropriate
    registers. With this, the primary effectively calls both functions
    to have the MMU enabled, but secondaries only need to call the
    latter.

  - Rewriting the function that enables MMU in assembly so that it
    doesn't use stack.

This patch fixes a bunch of MISRA issues on the way.

Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      0cc7aa89
  21. 26 Jun, 2018 1 commit
  23. 12 Jun, 2018 1 commit
    • Daniel Boulby's avatar
      Fix MISRA Rule 5.3 Part 1 · d3775d46
      Daniel Boulby authored 
      

Conflict with function name and variable name within that function.
Change the name of the function from image_size to get_image_size
to remove conflict and make the function fit the normal project
naming convention.

Rule 5.3:  An identifier declared in an inner scope shall not
           hide an identifier declared in an outer scope

Fixed For:
    make LOG_LEVEL=50 PLAT=fvp

Change-Id: I1a63d2730113e2741fffa79730459c584b0224d7
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      d3775d46
  25. 22 May, 2018 1 commit
  27. 18 May, 2018 1 commit
  29. 04 May, 2018 1 commit
    • Jeenu Viswambharan's avatar
      AArch64: Introduce RAS handling · 14c6016a
      Jeenu Viswambharan authored 
      

RAS extensions are mandatory for ARMv8.2 CPUs, but are also optional
extensions to base ARMv8.0 architecture.

This patch adds build system support to enable RAS features in ARM
Trusted Firmware. A boolean build option RAS_EXTENSION is introduced for
this.

With RAS_EXTENSION, an Exception Synchronization Barrier (ESB) is
inserted at all EL3 vector entry and exit. ESBs will synchronize pending
external aborts before entering EL3, and therefore will contain and
attribute errors to lower EL execution. Any errors thus synchronized are
detected via. DISR_EL1 register.

When RAS_EXTENSION is set to 1, HANDLE_EL3_EA_FIRST must also be set to 1.

Change-Id: I38a19d84014d4d8af688bd81d61ba582c039383a
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      14c6016a
  31. 23 Apr, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Add support for the SMC Calling Convention 2.0 · 2f370465
      Antonio Nino Diaz authored 
      

Due to differences in the bitfields of the SMC IDs, it is not possible
to support SMCCC 1.X and 2.0 at the same time.

The behaviour of `SMCCC_MAJOR_VERSION` has changed. Now, it is a build
option that specifies the major version of the SMCCC that the Trusted
Firmware supports. The only two allowed values are 1 and 2, and it
defaults to 1. The value of `SMCCC_MINOR_VERSION` is derived from it.

Note: Support for SMCCC v2.0 is an experimental feature to enable
prototyping of secure partition specifications. Support for this
convention is disabled by default and could be removed without notice.

Change-Id: I88abf9ccf08e9c66a13ce55c890edea54d9f16a7
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      2f370465
  33. 17 Apr, 2018 1 commit
  35. 13 Apr, 2018 1 commit
    • Roberto Vargas's avatar
      Fix MISRA rule 8.3 Part 4 · 735181b6
      Roberto Vargas authored 
      

Rule 8.3: All declarations of an object or function shall
          use the same names and type qualifiers

Fixed for:
	make DEBUG=1 PLAT=fvp SPD=tspd TRUSTED_BOARD_BOOT=1 \
	     GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
	     ROT_KEY=arm_rotprivk_rsa.pem MBEDTLS_DIR=mbedtls all

Change-Id: Ia34fe1ae1f142e89c9a6c19831e3daf4d28f5831
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      735181b6
  37. 07 Apr, 2018 2 commits
    • Jiafei Pan's avatar
      fix instruction address range limitation · b4ad9768
      Jiafei Pan authored 
      

For the adr instruction, it require the label's offset from the
address of this instruction must be in the range +/-1MB. If the
option "BL2_IN_XIP_MEM" is set to '1', in some cases, BL2's RW
memory will not in the range of +/-1MB from BL2's RO memory region.
so we need to use ldr instruction to cover this case.
Signed-off-by: default avatarJiafei Pan <Jiafei.Pan@nxp.com>
      b4ad9768
    • Jiafei Pan's avatar
      Add support for BL2 in XIP memory · 7d173fc5
      Jiafei Pan authored 
      

In some use-cases BL2 will be stored in eXecute In Place (XIP) memory,
like BL1. In these use-cases, it is necessary to initialize the RW sections
in RAM, while leaving the RO sections in place. This patch enable this
use-case with a new build option, BL2_IN_XIP_MEM. For now, this option
is only supported when BL2_AT_EL3 is 1.
Signed-off-by: default avatarJiafei Pan <Jiafei.Pan@nxp.com>
      7d173fc5
  39. 27 Mar, 2018 1 commit
    • Joel Hutton's avatar
      Clean usage of void pointers to access symbols · 9f85f9e3
      Joel Hutton authored 
      

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      9f85f9e3
  41. 21 Mar, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Rename 'smcc' to 'smccc' · 085e80ec
      Antonio Nino Diaz authored 
      

When the source code says 'SMCC' it is talking about the SMC Calling
Convention. The correct acronym is SMCCC. This affects a few definitions
and file names.

Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S)
but the old files have been kept for compatibility, they include the
new ones with an ERROR_DEPRECATED guard.

Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      085e80ec
  43. 28 Feb, 2018 3 commits
  45. 26 Feb, 2018 5 commits
    • Soby Mathew's avatar
      Dynamic cfg: MISRA fixes · da5f2745
      Soby Mathew authored 
      

Change-Id: I1d85b76af002b8b672fcaeca94939b7420bc8243
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      da5f2745
    • Soby Mathew's avatar
      ARM Platforms: Load HW_CONFIG in BL2 · cab0b5b0
      Soby Mathew authored 
      

The patch adds the necessary changes to load HW_CONFIG in BL2 for
ARM Platforms :

1. The load address of HW_CONFIG is specified via the `hw_config_addr`
property in TB_FW_CONFIG is loaded by BL1. The `hw_config_max_size`
property defines the maximum size to be expected for the HW_CONFIG.
The `arm_dyn_cfg_helpers.c` and corresponding header implements
utility functions to parse these DT properties defined.
The `arm_dyn_cfg.c` implements wrappers to these helpers to enable
them to be invoked from ARM platform layer.

2. `HW_CONFIG` is added to the `bl2_mem_params_descs[]` array which is
the list of images to be loaded by BL2.

3. The `libfdt` sources are now included when BL2 is built

4. A new helper `populate_next_bl_params_config()` is introduced in
desc_image_load.c to populate the subsequent executable BL images
with the `hw_config` and the corresponding `fw_config` if available.
The `plat_get_next_bl_params()` API for ARM platforms is modified to
invoke this new helper.

5. The implementation of `bl2_early_platform_setup2()` is modified to
consider `arg0` as well in addition to `arg1` passed from BL1.

6. Bump up the BL2 size for Juno to accommodate the inclusion of libfdt.

Change-Id: I80f1554adec41753e0d179a5237364f04fe13a3f
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      cab0b5b0
    • Soby Mathew's avatar
      Dynamic cfg: Introduce fdt wrappers · e5674e1f
      Soby Mathew authored 
      

Change-Id: I9b1cdaf2430a1998a69aa366ea1461224a3d43dc
Co-Authoured-by: default avatarJeenu Viswambharan <Jeenu.Viswambharan@arm.com>
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      e5674e1f
    • Soby Mathew's avatar
      Add dynamic config image IDs · bf9ce61b
      Soby Mathew authored 
      

Change-Id: I147031dea9487dc1976e31ad40c89b221e44edbc
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      bf9ce61b
    • Soby Mathew's avatar
      Dynamic cfg: Add HW and TB_FW configs to CoT · 6d31020e
      Soby Mathew authored 
      

This patch adds image IDs to `hw_config` and `tb_fw_config` and
includes them in the default Chain Of Trust (CoT).

Change-Id: If7bb3e9be8a5e48be76614b35bf43d58fc7fed12
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      6d31020e
  47. 02 Feb, 2018 1 commit
  49. 01 Feb, 2018 1 commit
    • Masahiro Yamada's avatar
      image_decompress: add APIs for decompressing images · 2e379d2f
      Masahiro Yamada authored 
      

These APIs are used by platforms that need to decompress images.

image_decompress_init():
  This registers a temporary buffer and a decompressor callback.
  This should be called from platform init code.

image_decompress_prepare():
  This should be called before each compressed image is loaded.  The
  best location to call this will be bl*_plat_handle_pre_image_load().

image_decompress():
  This should be called after each compressed image is loaded.  The
  best location to call this will be bl*_plat_handle_post_image_load().
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      2e379d2f