GitLab

This patch adds an argument to bl1_plat_post/pre_image_load() APIs
to make it more future proof. The default implementation of
these are moved to `plat_bl1_common.c` file.

These APIs are now invoked appropriately in the FWU code path prior
to or post image loading by BL1 and are not restricted
to LOAD_IMAGE_V2.

The patch also reorganizes some common platform files. The previous
`plat_bl2_el3_common.c` and `platform_helpers_default.c` files are
merged into a new `plat_bl_common.c` file.

NOTE: The addition of an argument to the above mentioned platform APIs
is not expected to have a great impact because these APIs were only
recently added and are unlikely to be used.

Change-Id: I0519caaee0f774dd33638ff63a2e597ea178c453
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Ensure the correct execution of TLBI instructions

Make all build results depend on all makefiles

drivers:ufs: fix hynix ufs bug with quirk on hi36xx SoC

Hynix ufs has deviations on hi36xx platform which will result
in ufs bursts transfer failures at a very low probability.

To fix the problem, the Hynix device must set the register
VS_DebugSaveConfigTime to 0x10, which will set time reference
for SaveConfigTime is 250 ns. The time reference for SaveConfigTime
is 40 ns by default.
Signed-off-by: fengbaopeng <fengbaopeng@hisilicon.com>

Fix Foundation FVP instructions in User Guide

qemu: Fix interrupt type check

ARM Platforms: Add assertion for BL2_BASE

The Arm Trusted Firmware is built by default for ARMv8-A version 8.0.
However, the Foundation FVP runs by default in the highest version of
the architecture it supports. This causes problems when trying to run
the Arm Trusted Firmware on it.

This patch adds a note to the User Guide about this problem.

Change-Id: I0220fe1a9c66c2292149ad4a7ffe5e27ba08ab28
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fixup AArch32 errata printing framework

The AArch32 assembly implementation of `print_errata_status` did not save
a register which was getting clobbered by a `get_cpu_ops_ptr`. This
patch fixes that.

Change-Id: Id0711e46b7c685a18a10328d4b513e952a5d860b
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: I93e491fde2a991fc39584c2762f33cbea40541e3
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: Iadb21bb56f2e61d7e6aec9b3b3efd30059521def
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This makes incremental builds work when the only change is to a
definition in a makefile.

Fixes arm-software/tf-issues#551
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Resolve TZC400 build issue when DEBUG=1 and ENABLE_ASSERTIONS=0

Previously the definition of `_tzc_read_peripheral_id()` was wrapped
in ENABLE_ASSERTIONS build flag. This causes build issue for TZC400 driver
when DEBUG=1 and ENABLE_ASSERTIONS=0. This patch fixes the same by
moving the definitions outside the ENABLE_ASSERTIONS build flag.

Change-Id: Ic1cad69f02ce65ac34aefd39eaa96d5781043152
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

After executing a TLBI a DSB is needed to ensure completion of the
TLBI.

rk3328: The MMU is allowed to load TLB entries for as long as it is
enabled. Because of this, the correct place to execute a TLBI is right
after disabling the MMU.

Change-Id: I8280f248d10b49a8c354a4ccbdc8f8345ac4c170
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Redefine SMC_UNK as -1 instead of 0xFFFFFFFF

tegra: Fix mmap_region_t struct mismatch

hikey960: avoid hardcode on uart port

Commit fdb1964c

 ("xlat: Introduce
MAP_REGION2() macro") added a granularity field to mmap_region_t.

Tegra platforms were using the v2 xlat_tables implementation in
common/tegra_common.mk, but v1 xlat_tables.h headers in soc/*/plat_setup.c
where arrays are being defined. This caused the next physical address to
be read as granularity, causing EINVAL error and triggering an assert.

Consistently use xlat_tables_v2.h header to avoid this.

Fixes ARM-software/tf-issues#548.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Avoid hardcode on uart port. The uart port could be auto detected
on HiKey960 platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

EHF: Fix priority check

ARM platforms: Fix console address for flush

Remove URLs from comments

optee: print header info before validate

According to the SMC Calling Convention (ARM DEN0028B):

    The Unknown SMC Function Identifier is a sign-extended value of
    (-1) that is returned in R0, W0 or X0 register.

The value wasn't sign-extended because it was defined as a 32-bit
unsigned value (0xFFFFFFFF).

SMC_PREEMPT has been redefined as -2 for the same reason.

NOTE: This might be a compatibility break for some AArch64 platforms
that don't follow the previous version of the SMCCC (ARM DEN0028A)
correctly. That document specifies that only the bottom 32 bits of the
returned value must be checked. If a platform relies on the top 32 bits
of the result being 0 (so that SMC_UNK is 0x00000000FFFFFFFF), it will
have to fix its code to comply with the SMCCC.

Change-Id: I7f7b109f6b30c114fe570aa0ead3c335383cb54d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:

- The link in `sdei_state.c` can also be found in the documentation file
  `docs/sdei.rst`.

- The bug that the file `io_fip.c` talks about doesn't affect the
  currently supported version of GCC, so it doesn't make sense to keep
  the comment. Note that the version of GCC officially supported is the
  one that comes with Linaro Release 17.10, which is GCC 6.2.

- The link in `tzc400.c` was broken, and it didn't correctly direct to
  the Technical Reference Manual it should. The link has been replaced
  by the title of the document, which is more convenient when looking
  for the document.

Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

When deactivating, it's not an error if the priority being deactivating
is equal to the active priority. Fix this.

Change-Id: I66f0e9e775ac9aba8a7cc48cd3ecd3b358be63c0
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The console core flush API expects the base address in the first
register, but ARM helpers currently sets the second register with the
base address. This causes an assert failure.

This patch fixes that.

Change-Id: Ic54c423cd60f2756902ab3cfc77b3de2ac45481e
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

TSP changes for EHF

Function plat_ic_get_pending_interrupt_type() should return interrupt
type, not id. The function is used in aarch64 exception handling and
currently the irq/fiq forwarding fails if a secure interrupt happens while
running normal world.

The qemu-specific gic file does not contain any extra functionality so it
can be removed and common file can be used instead.

fixes arm-software/tf-issues#546
Signed-off-by: Santeri Salko <santeri.salko@gmail.com>

maintainers.rst: Add maintainer for plat Poplar

poplar: misc updates

zlib: Fix build error when LOG_LEVEL=50

When enabling VERBOSE() traces, the zlib library fails to compile
because of an incompatible format specifier string. Fix that.

Change-Id: I74ff1c8dc2e6157ee982f7754bce4504599e3013
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Fix zero_normalmem() for BL2_AT_EL3

Currently optee header info is only printed after it is validated,
but this does not help with debugging in case of error, so print it
before.
Signed-off-by: Victor Chong <victor.chong@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>