GitLab

Previously commit 555ebb34db8f3424c1b394df2f10ecf9c1f70901 attmpted to fix this
GCC issue:

services/std_svc/psci/psci_common.c: In function 'psci_do_state_coordination':
services/std_svc/psci/psci_common.c:220:27: error: array subscript is above
array bounds [-Werror=array-bounds]
  psci_req_local_pwr_states[pwrlvl - 1][cpu_idx] = req_pwr_state;

This fix doesn't work as asserts aren't built in non-debug build flows.

Let's use GCCs #pragma option (documented here:
https://gcc.gnu.org/onlinedocs/gcc/Diagnostic-Pragmas.html

) to avoid
this false positive instead.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>

Hikey960: fix PSCI suspend stuck issue

bl32: add secure interrupt handling in AArch32 sp_min

Clear the cpuidle flag when resuming from idle. This flag is set
when entering idle, and if it remains set when resuming, it can
prevent the cluster from powering off during the next system
suspend operation. During system suspend, all CPUs are plugged
out except the last CPU, which is suspended. If any of the
cpuidle flags are set at this point, the last CPU will be stuck
in a WFI loop and will not be powered off.
This problem only occurs during system suspend.
Signed-off-by: Tao Wang <kevin.wangtao@linaro.org>

qemu: Add LOAD_IMAGE_V2 support

The generic LOAD_IMAGE_V2 framework has been merged and enable for almost
all the arm platform. Because qemu platform doesn't share those common
files with arm, QEMU haven't got this support yet.

This patch add all the necessary code the files for adding LOAD_IMAGE_V2
support on QEMU and enable it as default.

Fixes ARM-software/tf-issues#507
Signed-off-by: Fu Wei <fu.wei@linaro.org>

Support opteed header

Add documentation of the xlat tables library V2

Fix BL2U entrypoint possible parameter corruption

Support for RevC FVP model

qemu: use translation tables library v2 as default.

Add support for a minimal secure interrupt service in sp_min for
the AArch32 implementation. Hard code that only FIQs are handled.

Introduce bolean build directive SP_MIN_WITH_SECURE_FIQ to enable
FIQ handling from SP_MIN.

Configure SCR[FIQ] and SCR[FW] from generic code for both cold and
warm boots to handle FIQ in secure state from monitor.

Since SP_MIN architecture, FIQ are always trapped when system executes
in non secure state. Hence discard relay of the secure/non-secure
state in the FIQ handler.

Change-Id: I1f7d1dc7b21f6f90011b7f3fcd921e455592f5e7
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

ARM TF need transfer information about pageable image load address
and memory limit to OPTEE. OPTEE will relocate the pageable image
to where it's needed.
The legacy OP-TEE images that do not include header information
are not affected.

Change-Id: Id057efbbc894de7c36b2209b391febea4729c455
Signed-off-by: Edison Ai <edison.ai@arm.com>

Trusted OS may have extra images to be loaded. Load them one by one
and do the parsing. In this patch, ARM TF need to load up to 3 images
for optee os: header, pager and paged images. Header image is the info
about optee os and images. Pager image include pager code and data.
Paged image include the paging parts using virtual memory.

Change-Id: Ia3bcfa6d8a3ed7850deb5729654daca7b00be394
Signed-off-by: Summer Qin <summer.qin@arm.com>

Since Trusted OS firmware may have extra images, need to
assign new uuid and image id for them.
The TBBR chain of trust has been extended to add support
for the new images within the existing Trusted OS firmware
content certificate.

Change-Id: I678dac7ba1137e85c5779b05e0c4331134c10e06
Signed-off-by: Summer Qin <summer.qin@arm.com>

The documentation describes the design of the translation tables
library version 2 used by the ARM Trusted Firmware.

The diagram file has been created with Dia version 0.97.2. This tool
can be obtained from: https://wiki.gnome.org/Apps/Dia/Download



Inkscape has been used to generate the *.png file from the *.dia file
to work around a bug in the generation of *.png files in some versions
of Dia.

Change-Id: Ie67d9998d4ae881b2c060200a318ad3ac2fa5e91
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Fix to change.log

With the migration to .rst from .md, the Issues Resolved and
Known Issues sections for v1.4 were using Header 1 format.

This patch changes to using Header 2 for these sections.

Change-Id: Ic3127d84eb169a65039fd4cc8284c6429302732d
Signed-off-by: David Cunado <david.cunado@arm.com>

Fix order of #includes

Replace the use of r12 by r10 to save the value of a parameter of
bl2u_entrypoint to pass it to bl2u_early_platform_setup at the end of
the function. r10 is a callee saved register so it will not become
corrupted by C code, whereas r12 is the The Intra-Procedure-call scratch
register potentially used by veneers. See the ARM AAPCS document (ARM
IHI 0042F).

Change-Id: I4f37e54a6b550719edb40bb24cd8f498827e2749
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Revision C of the Base FVP has the same memory map as earlier revisions,
but has the following differences:

  - Implements CCI550 instead of CCI400,
  - Has a single instantiation of SMMUv3,
  - CPU MPIDs are shifted left by one level, and has MT bit set in them.

The correct interconnect to program is chosen at run time based on the
FVP revision. Therefore, this patch implements FVP functions for
interconnect programming, rather than depending on ARM generic ones. The
macros used have been renamed to reflect this change.

Additionally, this patch initializes SMMUv3 as part of FVP early
platform setup.

New ARM config flags are introduced for feature queries at run time.

Change-Id: Ic7b7f080953a51fceaf62ce7daa6de0573801f09
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The driver has only one API: to initialize an SMMUv3 device. This
operates on a device that implements secure state, by invalidating
secure caches and TLBs.

Change-Id: Ief32800419ddf0f1fe38c8f0da8f5ba75c72c826
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The current build system and driver requires the CCI product to be
specified at build time. The device constraints can be determined at run
time from its ID registers, obviating the need for specifying them
ahead.

This patch adds changes to identify and validate CCI at run time. Some
global variables are renamed to be in line with the rest of the code
base.

The build option ARM_CCI_PRODUCT_ID is now removed, and user guide is
updated.

Change-Id: Ibb765e349d3bc95ff3eb9a64bde1207ab710a93d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The CCI crash dump macros assumes CCI base at build time. Since this
can't be the case for CCI on FVP, choose not to register dump CCI
registers for FVP.

Change-Id: I7374a037e7fd0a85b138e84b3cf0aa044262da97
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

In contrast with the non-multi-threading DTS, this enumerates MPIDR
values shifted by one affinity level to the left. The newly added DTS
reflects CPUs with a single thread in them.

Since both DTS files are the same apart from MPIDR contents, the common
bits have been moved to a separate file that's then included from the
top-level DTS files. The multi-threading version only updates the MPIDR
contents.

Change-Id: Id225cd93574f764171df8962ac76f42fcb6bba4b
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

ARM CPUs with multi-threading implementation has more than one
Processing Element in a single physical CPU. Such an implementation will
reflect the following changes in the MPIDR register:

  - The MT bit set;

  - Affinity levels pertaining to cluster and CPUs occupy one level
    higher than in a single-threaded implementation, and the lowest
    affinity level pertains to hardware threads. MPIDR affinity level
    fields essentially appear shifted to left than otherwise.

The FVP port henceforth assumes that both properties above to be
concomitant on a given FVP platform.

To accommodate for varied MPIDR formats at run time, this patch
re-implements the FVP platform-specific functions that translates MPIDR
values to a linear indices, along with required validation. The same
treatment is applied for GICv3 MPIDR hashing function as well.

An FVP-specific build option FVP_MAX_PE_PER_CPU is introduced which
specifies the maximum number of threads implemented per CPU. For
backwards compatibility, its value defaults to 1.

Change-Id: I729b00d3e121d16ce9a03de4f9db36dfac580e3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

plat_get_my_stack is called from C, so it can't expect argument
registers to be preserved. Stash registers temporarily onto the stack
instead.

plat_set_my_stack is called during early init, when there exists no
stack. Use any register other than argument registers to stash temporary
values.

Change-Id: I98052e20671d0933201d45ec7a5affccd71ce08c
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

fiptool: remove local directory from the header search path

lib: psci: early suspend handler for platforms

hikey: Disable VBUS_DET interrupt for PMIC

Fix sign of variable in xlat_tables_print()

This patch changes the sign of the loop variable used in
xlat_tables_print(). It needs to be unsigned because it is compared
against another unsigned int.

Change-Id: I2b3cee7990dd75e8ebd2701de3860ead7cad8dc8
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

This patch implements the early suspend handler for Tegra SoCs. This
handler is empty for now and the actual support for a particular platform
would be added later.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds an early suspend handler, that executes with
SMP and data cache enabled. This handler allows platforms to
perform any early actions during the CPU suspend entry sequence.

This handler is optional and platforms can choose to implement it
depending on their needs. The `pwr_domain_suspend` handler still
exists and platforms can keep on using it without any side effects.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Add doc for some Cortex A53 errata workarounds

Translation table library v2 improvements

Fix alphabetic ordering

This fix modifies the order of system includes to meet the ARM TF coding
standard whilst retaining header groupings.

Change-Id: Ib91968f8e2cac9e96033d73d3ad9d0a2ae228b13
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

Almost all the arm platform has switch to translation tables library v2 as
default. Because qemu platform doesn't use arm_common.mk like other arm
platforms, QEMU haven't switched to v2 yet.

This patch adds all the necessary code for adding translation tables
library v2 support on QEMU and use it as default.

Fixes ARM-software/tf-issues#508
Signed-off-by: Fu Wei <fu.wei@linaro.org>

Fix CSS UART clock value