Skip to content

GitLab

Switch branch/tag
  1. 24 Jul, 2019 2 commits
    • Julius Werner's avatar
      Factor out cross-BL API into export headers suitable for 3rd party code · 57bf6057
      Julius Werner authored 
      

This patch adds a new include/export/ directory meant for inclusion in
third-party code. This is useful for cases where third-party code needs
to interact with TF-A interfaces and data structures (such as a custom
BL2-implementation like coreboot handing off to BL31). Directly
including headers from the TF-A repository avoids having to duplicate
all these definitions (and risk them going stale), but with the current
header structure this is not possible because handoff API definitions
are too deeply intertwined with other TF code/headers and chain-include
other headers that will not be available in the other environment.

The new approach aims to solve this by separating only the parts that
are really needed into these special headers that are self-contained and
will not chain-include other (non-export) headers. TF-A code should
never include them directly but should instead always include the
respective wrapper header, which will include the required prerequisites
(like <stdint.h>) before including the export header. Third-party code
can include the export headers via its own wrappers that make sure the
necessary definitions are available in whatever way that environment can
provide them.

Change-Id: Ifd769320ba51371439a8e5dd5b79c2516c3b43ab
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      57bf6057
    • Julius Werner's avatar
      Use explicit-width data types in AAPCS parameter structs · 9352be88
      Julius Werner authored 
      

It's not a good idea to use u_register_t for the members of
aapcs64_params_t and aapcs32_params_t, since the width of that type
always depends on the current execution environment. This would cause
problems if e.g. we used this structure to set up the entry point of an
AArch32 program from within an AArch64 program. (It doesn't seem like
any code is doing that today, but it's probably still a good idea to
write this defensively. Also, it helps with my next patch.)

Change-Id: I12c04a85611f2b6702589f3362bea3e6a7c9f776
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      9352be88
  3. 18 Jul, 2019 1 commit
    • Julius Werner's avatar
      Introduce lightweight BL platform parameter library · b852d229
      Julius Werner authored 
      

This patch adds some common helper code to support a lightweight
platform parameter passing framework between BLs that has already been
used on Rockchip platforms but is more widely useful to others as well.
It can be used as an implementation for the SoC firmware configuration
file mentioned in the docs, and is primarily intended for platforms
that only require a handful of values to be passed and want to get by
without a libfdt dependency. Parameters are stored in a linked list and
the parameter space is split in generic and vendor-specific parameter
types. Generic types will be handled by this code whereas
vendor-specific types have to be handled by a vendor-specific handler
function that gets passed in.

Change-Id: If3413d44e86b99d417294ce8d33eb2fc77a6183f
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      b852d229
  5. 12 Jul, 2019 1 commit
  7. 10 Jul, 2019 3 commits
  9. 02 Jul, 2019 8 commits
  11. 28 Jun, 2019 1 commit
  13. 26 Jun, 2019 1 commit
    • Manoj Kumar's avatar
      n1sdp: add code for DDR ECC enablement and BL33 copy to DDR · de8bc83e
      Manoj Kumar authored 
      

N1SDP platform supports RDIMMs with ECC capability. To use the ECC
capability, the entire DDR memory space has to be zeroed out before
enabling the ECC bits in DMC620. Zeroing out several gigabytes of
memory from SCP is quite time consuming so functions are added that
zeros out the DDR memory from application processor which is
much faster compared to SCP. BL33 binary cannot be copied to DDR memory
before enabling ECC so this is also done by TF-A from IOFPGA-DDR3
memory to main DDR4 memory after ECC is enabled.

Original PLAT_PHY_ADDR_SPACE_SIZE was limited to 36-bits with which
the entire DDR space cannot be accessed as DRAM2 starts in base
0x8080000000. So these macros are redefined for all ARM platforms.

Change-Id: If09524fb65b421b7a368b1b9fc52c49f2ddb7846
Signed-off-by: default avatarManoj Kumar <manoj.kumar3@arm.com>
      de8bc83e
  15. 17 Jun, 2019 3 commits
  17. 13 Jun, 2019 2 commits
    • Marek Vasut's avatar
      rcar_gen3: console: Convert to multi-console API · 018358fc
      Marek Vasut authored 
      

Convert the R-Car Gen3 platform and both SCIF and Log drivers
to multi-console API.
Signed-off-by: default avatarMarek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I18556973937d150b60453f9150d54ee612571e35
      018358fc
    • Sandrine Bailleux's avatar
      Fix type of cot_desc_ptr · 2efb7ddc
      Sandrine Bailleux authored 
      

The chain of trust description and the pointer pointing to its first
element were incompatible, thus requiring an explicit type cast for
the assignment.

- cot_desc was an array of
  const pointers to const image descriptors.

- cot_desc_ptr was a const pointer to
  (non-constant) pointers to const image descriptors.

Thus, trying to assign cot_desc to cot_desc_ptr (with no cast) would
generate the following compiler warning:

drivers/auth/tbbr/tbbr_cot.c:826:14: warning: initialization discards
  ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
 REGISTER_COT(cot_desc);
              ^~~~~~~~

Change-Id: Iae62dd1bdb43fe379e3843d96461d47cc2f68a06
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      2efb7ddc
  19. 06 Jun, 2019 1 commit
  21. 28 May, 2019 1 commit
  23. 24 May, 2019 1 commit
    • Alexei Fedorov's avatar
      Add support for Branch Target Identification · 9fc59639
      Alexei Fedorov authored 
      

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.

Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      9fc59639
  25. 15 May, 2019 1 commit
    • Sami Mujawar's avatar
      Add option for defining platform DRAM2 base · 6bb6015f
      Sami Mujawar authored 
      

The default DRAM2 base address for Arm platforms
is 0x880000000. However, on some platforms the
firmware may want to move the start address to
a different value.

To support this introduce PLAT_ARM_DRAM2_BASE that
defaults to 0x880000000; but can be overridden by
a platform (e.g. in platform_def.h).

Change-Id: I0d81195e06070bc98f376444b48ada2db1666e28
Signed-off-by: default avatarSami Mujawar <sami.mujawar@arm.com>
      6bb6015f
  27. 10 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: Abort DMA transactions · 1461ad9f
      Alexei Fedorov authored 
      

For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.

Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      1461ad9f
  29. 07 May, 2019 2 commits
  31. 03 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: refactor the driver code · ccd4d475
      Alexei Fedorov authored 
      

This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.

Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      ccd4d475
  33. 25 Apr, 2019 1 commit
  35. 18 Apr, 2019 1 commit
  37. 17 Apr, 2019 5 commits
  39. 12 Apr, 2019 1 commit
    • Ambroise Vincent's avatar
      Mbed TLS: Remove weak heap implementation · 2374ab17
      Ambroise Vincent authored 
      

The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.

The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.

Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
      2374ab17
  41. 08 Apr, 2019 2 commits
    • Alexei Fedorov's avatar
      Add support for Cortex-A76AE CPU · 9ccc5a57
      Alexei Fedorov authored 
      

Change-Id: I0a81f4ea94d41245cd5150de341b51fc70babffe
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      9ccc5a57
    • Joel Hutton's avatar
      cot-desc: optimise memory further · 30070427
      Joel Hutton authored 
      

This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.

memory diff:
bl1:        bl2:
    text        text
      -12         -12
    bss         bss
      -1463       0
    data        data
      -56         -48
    rodata      rodata
      -5688       -2592
    total       total
      -7419       -2652

Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      30070427