Skip to content

GitLab

Switch branch/tag
  1. 11 Jan, 2018 2 commits
  3. 06 Dec, 2017 1 commit
    • Antonio Nino Diaz's avatar
      SPM: Move S-EL1/S-EL0 xlat tables to TZC DRAM · 45d640f0
      Antonio Nino Diaz authored 
      

A new platform define, `PLAT_SP_IMAGE_XLAT_SECTION_NAME`, has been
introduced to select the section where the translation tables used by
the S-EL1/S-EL0 are placed.

This define has been used to move the translation tables to DRAM secured
by TrustZone.

Most of the extra needed space in BL31 when SPM is enabled is due to the
large size of the translation tables. By moving them to this memory
region we can save 44 KiB.

A new argument has been added to REGISTER_XLAT_CONTEXT2() to specify the
region where the translation tables have to be placed by the linker.

Change-Id: Ia81709b4227cb8c92601f0caf258f624c0467719
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      45d640f0
  5. 30 Nov, 2017 1 commit
    • David Cunado's avatar
      Enable SVE for Non-secure world · 1a853370
      David Cunado authored 
      

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.

If SVE is implemented, EL3 will do the following:

- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.

- Exit from Non-secure world: SIMD, FP and SVE functionality is
  disabled. As SIMD and FP registers are part of the SVE Z-registers
  then any use of SIMD / FP functionality would corrupt the SVE
  registers.

The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.

This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.

Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.

Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.

Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      1a853370
  7. 29 Nov, 2017 3 commits
  9. 20 Nov, 2017 1 commit
    • Dimitris Papastamos's avatar
      Refactor Statistical Profiling Extensions implementation · 281a08cc
      Dimitris Papastamos authored 
      

Factor out SPE operations in a separate file.  Use the publish
subscribe framework to drain the SPE buffers before entering secure
world.  Additionally, enable SPE before entering normal world.

A side effect of this change is that the profiling buffers are now
only drained when a transition from normal world to secure world
happens.  Previously they were drained also on return from secure
world, which is unnecessary as SPE is not supported in S-EL1.

Change-Id: I17582c689b4b525770dbb6db098b3a0b5777b70a
Signed-off-by: default avatarDimitris Papastamos <dimitris.papastamos@arm.com>
      281a08cc
  11. 17 Nov, 2017 1 commit
  13. 15 Nov, 2017 1 commit
    • David Cunado's avatar
      Move FPEXC32_EL2 to FP Context · 91089f36
      David Cunado authored 
      

The FPEXC32_EL2 register controls SIMD and FP functionality when the
lower ELs are executing in AArch32 mode. It is architecturally mapped
to AArch32 system register FPEXC.

This patch removes FPEXC32_EL2 register from the System Register context
and adds it to the floating-point context. EL3 only saves / restores the
floating-point context if the build option CTX_INCLUDE_FPREGS is set to 1.

The rationale for this change is that if the Secure world is using FP
functionality and EL3 is not managing the FP context, then the Secure
world will save / restore the appropriate FP registers.

NOTE - this is a break in behaviour in the unlikely case that
CTX_INCLUDE_FPREGS is set to 0 and the platform contains an AArch32
Secure Payload that modifies FPEXC, but does not save and restore
this register

Change-Id: Iab80abcbfe302752d52b323b4abcc334b585c184
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      91089f36
  15. 13 Nov, 2017 2 commits
    • Jeenu Viswambharan's avatar
      ARM platforms: Provide SDEI entry point validation · 781f4aac
      Jeenu Viswambharan authored 
      

Provide a strong definition for plat_sdei_validate_sdei_entrypoint()
which translates client address to Physical Address, and then validating
the address to be present in DRAM.

Change-Id: Ib93eb66b413d638aa5524d1b3de36aa16d38ea11
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      781f4aac
    • Jeenu Viswambharan's avatar
      BL31: Introduce Exception Handling Framework · 21b818c0
      Jeenu Viswambharan authored 
      

EHF is a framework that allows dispatching of EL3 interrupts to their
respective handlers in EL3.

This framework facilitates the firmware-first error handling policy in
which asynchronous exceptions may be routed to EL3. Such exceptions may
be handed over to respective exception handlers. Individual handlers
might further delegate exception handling to lower ELs.

The framework associates the delegated execution to lower ELs with a
priority value. For interrupts, this corresponds to the priorities
programmed in GIC; for other types of exceptions, viz. SErrors or
Synchronous External Aborts, individual dispatchers shall explicitly
associate delegation to a secure priority. In order to prevent lower
priority interrupts from preempting higher priority execution, the
framework provides helpers to control preemption by virtue of
programming Priority Mask register in the interrupt controller.

This commit allows for handling interrupts targeted at EL3. Exception
handlers own interrupts by assigning them a range of secure priorities,
and registering handlers for each priority range it owns.

Support for exception handling in BL31 image is enabled by setting the
build option EL3_EXCEPTION_HANDLING=1.

Documentation to follow.

NOTE: The framework assumes the priority scheme supported by platform
interrupt controller is compliant with that of ARM GIC architecture (v2
or later).

Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      21b818c0
  17. 08 Nov, 2017 11 commits
  19. 01 Nov, 2017 1 commit
  21. 31 Oct, 2017 2 commits
  23. 23 Oct, 2017 2 commits
  25. 17 Oct, 2017 4 commits
  27. 16 Oct, 2017 4 commits
  29. 13 Oct, 2017 3 commits
    • Roberto Vargas's avatar
      Update PSCI version to 1.1 · 829e97d7
      Roberto Vargas authored 
      

Updated the PSCI version conforming to the PSCI v1.1
specification (ARM DEN022D).

Change-Id: I1f34772ef6de37ec1ade719a1ab3aa062152d995
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      829e97d7
    • David Cunado's avatar
      Init and save / restore of PMCR_EL0 / PMCR · 3e61b2b5
      David Cunado authored 
      

Currently TF does not initialise the PMCR_EL0 register in
the secure context or save/restore the register.

In particular, the DP field may not be set to one to prohibit
cycle counting in the secure state, even though event counting
generally is prohibited via the default setting of MDCR_EL3.SMPE
to 0.

This patch initialises PMCR_EL0.DP to one in the secure state
to prohibit cycle counting and also initialises other fields
that have an architectually UNKNOWN reset value.

Additionally, PMCR_EL0 is added to the list of registers that are
saved and restored during a world switch.

Similar changes are made for PMCR for the AArch32 execution state.

NOTE: secure world code at lower ELs that assume other values in PMCR_EL0
will be impacted.

Change-Id: Iae40e8c0a196d74053accf97063ebc257b4d2f3a
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      3e61b2b5
    • Roberto Vargas's avatar
      reset2: Add PSCI system_reset2 function · 36a8f8fd
      Roberto Vargas authored 
      

This patch implements PSCI_SYSTEM_RESET2 API as defined in PSCI
v1.1 specification. The specification allows architectural and
vendor-specific resets via this API. In the current specification,
there is only one architectural reset, the warm reset. This reset is
intended to provide a fast reboot path that guarantees not to reset
system main memory.

Change-Id: I057bb81a60cd0fe56465dbb5791d8e1cca025bd3
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      36a8f8fd
  31. 05 Oct, 2017 1 commit
    • Soby Mathew's avatar
      GICv3: add functions for save and restore · ebf1ca10
      Soby Mathew authored 
      

During system suspend, the GICv3 Distributor and Redistributor context
can be lost due to power gating of the system power domain. This means
that the GICv3 context needs to be saved prior to system suspend and
restored on wakeup. Currently the consensus is that the Firmware should
be in charge of this. See tf-issues#464 for more details.

This patch introduces helper APIs in the GICv3 driver to save and
restore the Distributor and Redistributor contexts. The GICv3 ITS
context is not considered in this patch because the specification says
that the details of ITS power management is implementation-defined.
These APIs are expected to be appropriately invoked by the platform
layer during system suspend.

Fixes ARM-software/tf-issues#464

Change-Id: Iebb9c6770ab8c4d522546f161fa402d2fe02ec00
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
Signed-off-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      ebf1ca10