GitLab

Signed-off-by: Victor Chong <victor.chong@linaro.org>

plat/arm: Fix BL31_BASE when RESET_TO_BL31=1

The value of BL31_BASE currently depends on the size of BL31. This
causes problems in the RESET_TO_BL31 case because the value of
BL31_BASE is used in the model launch parameters, which often changes.

Therefore, this patch fixes BL31_BASE to the middle of Trusted SRAM,
to avoid further model parameter changes in future.

Change-Id: I6d7fa4fe293717d84768974679539c0e0cb6d935
Signed-off-by: David Cunado <david.cunado@arm.com>

Filter out invalid configure for EL3_PAYLOAD_BASE

Introduce SDS Driver

Reduce time lock in psci_do_cpu_off

Set NS version SCTLR during warmboot path

juno: Fix bug in plat_get_my_entrypoint

TRUSTED_BOARD_BOOT and GENERATE_COT is not
compatible with EL3_PAYLOAD_BASE

Change-Id: I538c77e1f6c7da400d30ae4d633b8fcc55742202
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

hikey*: Add LOAD_IMAGE_V2 and OP-TEE header parsing support

Support legacy RSA PKCS#1 v1.5 in cert create

Add CFI debug info to vector entries

CPU_DATA_LOG2SIZE depends on cache line size

This patch does the required changes to enable CSS platforms
to build and use the SDS framework. Since SDS is always coupled with
SCMI protocol, the preexisting SCMI build flag is now renamed to
`CSS_USE_SCMI_SDS_DRIVER` which will enable both SCMI and SDS on
CSS platforms. Also some of the workarounds applied for SCMI are
now removed with SDS in place.

Change-Id: I94e8b93f05e3fe95e475c5501c25bec052588a9c
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch introduces the driver for Shared-Data-Structure (SDS)
framework which will be used for communication between SCP and AP
CPU. The SDS framework is intended to replace the Boot-Over-MHU
(BOM) protocol used currently for the communication

Change-Id: Ic174291121f4e581b174cce3389d22d6435f7269
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch factors out common files required for sp_min for all CSS
platforms from the JUNO specific makefile to a the new `css_sp_min.mk`
makefile. This also allows the common build options that affect CSS
platforms to be configured in a central makefile for sp_min.

Change-Id: Ida952d8833b1aa5eda77ae0a6664a4632aeab24c
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch fixes the inconsistency with regards as to how
BL2_BASE/BL2U_BASE and BL2_LIMIT/BL2U_LIMIT macros are defined
when building Juno to run in AArch32 mode at EL3. In this case,
BL32 is compiled for AArch32 whereas BL1 and BL2 are compiled
for AArch64. This resulted in BL32 conditionally compiling a
different definition of the above mentioned macros from BL1/BL2.
This is fixed by taking into consideration the
JUNO_AARCH32_EL3_RUNTIME build flag as well in the conditional
compilation check.

Change-Id: I27ac68aa4df0502089c1739c05366a9c509eb5be
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

psci_set_power_off_state only initializes a local variable, so there
isn't any reason why it should be done while the lock is held.

Change-Id: I1c62f4cd5d860d102532e5a5350152180d41d127
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

plat_get_my_entrypoint was branching to juno_do_reset_to_aarch_32_state,
which is not supposed to return, and in case of returning it implemented
an infinite loop. The problem was that plat_get_my_entrypoint was using
"b" instead of "bl", so juno_do_reset_to_aarch_32_state was returning to
the caller of plat_get_my_entrypoint instead of stop the system with a
panic.

To avoid this problem juno_do_reset_to_aarch_32_state was modified to
call directly to plat_panic_handler if it tries to return.

Change-Id: I591cf2dd78d27d8568fb15b91366e4b3dce027b5
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

asm_macros: set the default assembly code alignment to 4 byte

When ARM TF executes in AArch32 state, the NS version of SCTLR
is not being set during warmboot flow. This results in secondary
CPUs entering the Non-secure world with the default reset value
in SCTLR.

This patch explicitly sets the value of the NS version of SCTLR
during the warmboot flow rather than relying on the h/w.

Change-Id: I86bf52b6294baae0a5bd8af0cd0358cc4f55c416
Signed-off-by: David Cunado <david.cunado@arm.com>

Fix BL2 memory map when OP-TEE is the Secure Payload

The commit 3eb2d672

 optimizes the memory map for BL2 when TSP
is not present. But this also broke OP-TEE as it was reusing
the TSP mapping. This patch fixes this problem by adding a
separate mapping for OP-TEE in the BL2 memory map table.

Change-Id: I130a2ea552b7b62d8478081feb1f4ddf5292a118
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

uniphier: fix-up for PXs3 SoC

Signed-off-by: Victor Chong <victor.chong@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>

Platform may use specific cache line sizes. Since CACHE_WRITEBACK_GRANULE
defines the platform specific cache line size, it is used to define the
size of the cpu data structure CPU_DATA_SIZE aligned on cache line size.

Introduce assembly macro 'mov_imm' for AArch32 to simplify implementation
of function '_cpu_data_by_index'.

Change-Id: Ic2d49ffe0c3e51649425fd9c8c99559c582ac5a1
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Due to a bug in the Boot ROM, the USB load API turned out not working
as expected.  It is unfixable because the Boot ROM is hard-wired.

Add work around code in TF to bypass the problematic Boot ROM code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

checkpatch.pl from Linux reports tons of coding style errors and
warnings.  I am just fixing under plat/socionext/uniphier/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM platforms: Map TSP only when TSPD is included

This patch enables choice of RSA version at run time to be used for
generating signatures by the cert_tool. The RSA PSS as defined in
PKCS#1 v2.1 becomes the default version and this patch enables to specify
the RSA PKCS#1 v1.5 algorithm to `cert_create` through the command line
-a option. Also, the build option `KEY_ALG` can be used to pass this
option from the build system. Please note that RSA PSS is mandated
by Trusted Board Boot requirements (TBBR) and legacy RSA support is
being added for compatibility reasons.

Fixes ARM-Software/tf-issues#499
Change-Id: Ifaa3f2f7c9b43f3d7b3effe2cde76bf6745a5d73
Co-Authored-By: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

The `KEY_ALG` variable is used to select the algorithm for key
generation by `cert_create` tool for signing the certificates. This
variable was previously undocumented and did not have a global default
value. This patch corrects this and also adds changes to derive the
value of `TF_MBEDTLS_KEY_ALG` based on `KEY_ALG` if it not set by the
platform. The corresponding assignment of these variables are also now
removed from the `arm_common.mk` makefile.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I78e2d6f4fc04ed5ad35ce2266118afb63127a5a4

This patch ensures that the ARM_MAP_TSP_SEC_MEM memory region is mapped
in BL2 only if the TSPD has been included in the build. This saves one
entry in the plat_arm_mmap[] array and avoids to map extra memory when
it's not needed.

Change-Id: I6ae60822ff8f0de198145925b0b0d45355179a94
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

porting-guide.rst: Fix some sections' level

Juno: Define PLAT_LOG_LEVEL_ASSERT to LOG_LEVEL_INFO

Fix the level of the section
"13.   Function : plat_setup_psci_ops() [mandatory]",
including all the subsections.

Fix the level of the section
"12.7.   plat_psci_ops.pwr_domain_suspend_pwrdown_early() [optional]"
to lower it like the surrounding functions.

Change-Id: I781823bc96ece669f8fde4bd39c4e333c7bf4d1a
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Add Call Frame Information assembler directives to vector entries so
that debuggers display the backtrace of functions that triggered a
synchronous exception. For example, a function triggering a data abort
will be easier to debug if the backtrace can be displayed from a
breakpoint at the beginning of the synchronous exception vector.

DS-5 needs CFI otherwise it will not attempt to display the backtrace.
Other debuggers might have other needs. These debug information are
stored in the ELF file but not in the final binary.

Change-Id: I32dc4e4b7af02546c93c1a45c71a1f6d710d36b1
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch fixes the PLAT_LOG_LEVEL_ASSERT to 40 which corresponds
to LOG_LEVEL_INFO. Having this level of log for assertions means that the
`assert()` will not generate the strings implied in the expression taken
as parameter. This allows to save some memory when Juno is built for
LOG_LEVEL = LOG_LEVEL_VERBOSE and DEBUG = 1.

Fixes ARM-software/tf-issues#511

Change-Id: Id84a40f803ab07a5a8f6e587167af96694a07d04
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Assembly routines are usually defined by using "func" and "endfunc":

    func foo
      ...
    endfunc foo

Currently, the "func" macro does not specify ".align" directive
by default.  It causes unaligned instruction under some circumstances.

As far as I tested, this problem happens for GCC 5 or older.  It did
not happen for GCC 6 or newer.  Taking into account that GCC 4.x / 5.x
is still used, make sure that assembly code is at least 4 byte aligned.

[ How to reproduce the problem ]

For example, use GCC 5.3 downloaded from Linaro:
http://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/
aarch64-linux-gnu/gcc-linaro-5.3.1-2016.05-x86_64_aarch64-linux-gnu.tar.xz

Expand mbedtls-2.4.2 to the current directory.

Try the following:

  $ git log --oneline -1
  77544efb

 Merge pull request #1071 from jeenu-arm/syntax-fix
  $ aarch64-linux-gnu-gcc --version | head -1
  aarch64-linux-gnu-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412
  $ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=uniphier \
    TRUSTED_BOARD_BOOT=1 MBEDTLS_DIR=mbedtls-2.4.2
    ( snip build log )
  $ aarch64-linux-gnu-nm build/uniphier/release/bl1/bl1.elf | grep handler
  00000000800088f4 T bl1_fwu_smc_handler
  00000000800084c8 T bl1_smc_handler
  000000008000a6e0 t _panic_handler
  000000008000a8e0 W plat_error_handler
  000000008000a8e8 W plat_panic_handler
  000000008000a8d8 W plat_reset_handler
  000000008000a39f T reset_handler
  000000008000a367 t smc_handler
  000000008000a2ef t smc_handler64

You will notice "smc_handler64", "reset_handler", etc. are not properly
aligned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>