- 28 Jun, 2019 1 commit
-
-
Ambroise Vincent authored
The new API becomes the default one. Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec Signed-off-by:Ambroise Vincent <ambroise.vincent@arm.com>
-
- 26 Jun, 2019 1 commit
-
-
Ambroise Vincent authored
This interface has been deprecated in favour of MULTI_CONSOLE_API. Change-Id: I6170c1c8c74a890e5bd6d05396743fe62024a08a Signed-off-by:
-
- 17 Jun, 2019 38 commits
-
-
Marek Vasut authored
Now that QoS drivers are cleaned up , move them out of staging. Signed-off-by:Marek Vasut <marek.vasut+renesas@gmail.com> Change-Id: If61ab2157c30b8f5a6b91d2c56ddbb9098ef99e8
-
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
The DBSC QoS settings can be programmed by iterating over a table with register-value pairs and writing those to the registers, add function to do just that. Subsequent patches will convert the DBSC QoS setting functions for each SoC to this new function. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the V3M QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the E3 QoS init. No functional change. Signed-off-by: -
Marek Vasut authored
Replace the remaining ad-hoc register addresses with proper macros. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Move the DBSC write enabling and disabling to dbsc_setting() function, to make it local, instead of having it all over the code. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the D3 QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the M3N QoS init. No functional change. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the M3W QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Yann Gautier authored
The system configuration controller is mainly used to manage the compensation cell and other IOs and system related settings. The SYSCFG driver is in charge of configuring masters on the interconnect, IO compensation, low voltage boards, or pull-ups for boot pins. All other configurations should be handled in Linux drivers requiring it. Device tree files are also updated to manage vdd-supply regulator. Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42 Signed-off-by:
Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by:
Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
To activate the CSG option, the driver needs to set the bit2 of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator. This bit should not be cleared when starting the PLL. Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f Signed-off-by:
Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by:
-
Yann Gautier authored
Rework the macro that eases the table definition: the src and msk fields are now using MASK and SHIFT defines of each source register. Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to _UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields. Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7 to reflect the size of the register field, even if there are only 3 possible clock sources. The mask value is also corrected for QSPI and FMC clock selection. Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c Signed-off-by:
Etienne Carriere <etienne.carriere@st.com>
-
Yann Gautier authored
Those functions are generic for parsing nodes from device tree hence could be located in generic source file. The oscillators description structure is also moved to STM32MP1 clock driver, as it is no more used in stm32mp1_clkfunc and cannot be in a generic file. Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6 Signed-off-by:
-
