GitLab

There is a bug in the shared heap implementation for SGM. Until the bug
is solved, the default implementation is used.

Change-Id: I010911a3f00ed860f742b14daad1d99b9e7ce711
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  Mbed TLS: Remove weak heap implementation
  sgm: Fix bl2 sources

* changes:
  doc: Clarify cert_create build when USE_TBBR_DEFS=0
  plat/sgm: Remove redundant platform_oid.h

On Cortex A9 an errata can cause the processor to violate the rules for
speculative fetches when the MMU is off but branch prediction has not
been disabled. The workaround for this is to execute an Invalidate
Entire Branch Prediction Array (BPIALL) followed by a DSB.

see:http://arminfo.emea.arm.com/help/topic/com.arm.doc.uan0009d/UAN0009_cortex_a9_errata_r4.pdf


for more details.

Change-Id: I9146c1fa7563a79f4e15b6251617b9620a587c93
Signed-off-by: Joel Hutton <Joel.Hutton@arm.com>

* changes:
  rcar_gen3: plat: Update IPL and Secure Monitor Rev2.0.3
  rcar_gen3: drivers: Change to restore timer counter value at resume
  rcar_gen3: drivers: pwrc: Add DBSC4 setting before self-refresh mode
  rcar_gen3: plat: Update IPL and Secure Monitor Rev2.0.2
  rcar_gen3: drivers: ddr: Update DDR setting rev.0.35
  rcar_gen3: drivers: qos: change subslot cycle
  rcar_gen3: drivers: board: Add new board revision for H3ULCB
  rcar_gen3: plat: Change periodic write DQ training option.

The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.

The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.

Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

- Fix broken link to the issue tracker.
- Add contents section to make navigation easier throughout the page.
- Move the link to documentation contents near the top. Where it was
  before could be missed and documentation might seem inaccessible.

Change-Id: I502e4fc0fd312459cda351d30a8781c221625724
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

The weak version of plat_get_mbedtls_heap() was being used.

Change-Id: I6da331a098dd1af5bb64729d5b914cfb74b8869e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

The user guide documentation for the cert_create tool needs to
mention that a platform must have a platform_oid.h header file
in order to successfully build the cert_create tool when
USE_TBBR_DEFS is 0.

Change-Id: I77f86a022d207e88a79c97741be3eafbfa0c86f1
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This file is used when building the cert_create tool without using
the 'standard' set of Arm OID values as defined in the TBBR
specification (see tbbr_oid.h). This configuration is enabled by
setting USE_TBBR_DEFS to 0 during build.

At the moment this will fail because the header file included by
this file was removed in commit bb41eb7a

 ("cert: move
platform_oid.h to include/tools_share for all platforms"). For
the SGM platform this means that there is no current use for
this file.

Change-Id: I3c82983ada62330f1ab6be6d6c0cf489adabae7b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: If8918efad0fcbe6f91b66c0c7438406b1d4fb759

Changed to save and restore cntpct_el0 using memory mapped
register for generic timer when System Suspend and Resume.

Reported by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I40fd9f5434c4d52b320cd1d20322b9b8e4e67155

Very rarely, LPDDR4 power consumption may not decrease
In self-refresh mode.

This patch fixes the DBSC4 self-refresh mode sequence.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Kenji Miyazawa <kenji.miyazawa.xt@renesas.com>
Signed-off-by: Chiaki Fujii <chiaki.fujii.wj@renesas.com>
Change-Id: I838fa0892b1caf1ecd3f04538b3427e7d971ef59

Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I239f4d9f58d38515a49fa1a22cece48b59710d15

[IPL/DDR]
- Update DDR setting rev.0.35.
Signed-off-by: Chiaki Fujii <chiaki.fujii.wj@renesas.com>
Change-Id: I2b936ca8621ca320cc97353f99240da5f24781f7

Subslot cycle from 132 to 126 as default setting.
Subslot cycle from 264 to 252.

 [IPL/QoS]
 - Update H3 Ver.2.0 QoS setting rev.0.21.
 - Update H3 Ver.3.0 QoS setting rev.0.11.
 - Update M3 Ver.1.1 QoS setting rev.0.19.
 - Update M3 Ver.3.0 QoS setting rev.0.02.
 - Update M3N Ver.1.1 QoS setting rev.0.09.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I52b1bf880163ce03065dc8933d7f193e45cfd9a5

Board Revision[2:0]
 3'b000 Rev1.0 OB
 3'b001 Rev1.0 CE
 3'b010 Rev2.0	[New]
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Change-Id: I0f109cddc95eca78aea34c7149e70f14e2f1620b

Periodic write DQ training available as default.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I649cfe538e4e2c7e19145ce7d1938ce4361b2529

From the hotplug testing on Hikey960, in some case cores fail to become
online in the system. When some cores are hotplugged off, if other
cores in the same cluster enter into CPU idle states at the meantime,
the cluster will be powered off. This introduces the state machine
malfunction in the power controller, thus when hotplug on the core
afterwards, it fails to boot up the core because the power controller
thinks the cluster is powered on.

This patch is to avoid race condition between hotplug and idles by
preventing cluster power off when some of cores in the cluster are
hotplugged off, if all cores in the same cluster are hotplugged off,
the cluster can be powered off.

Change-Id: Ib2feeb093357c70409a3536cb4f9da9b504fdcbe
Signed-off-by: Wei Yu <yuwei3@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Change-Id: I8b7c7888d09200410e1a1c11a070c94dd8013ea7
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

On Cortex-A7 an L2 set/way cache maintenance operation can overtake
an L1 set/way cache maintenance operation. The mitigation for this is
to use a `DSB` instruction before changing cache. The cache cleaning
code happens to already be doing this, so only a comment was added.

Change-Id: Ia1ffb8ca8b6bbbba422ed6f6818671ef9fe02d90
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

The spm_sp_get_by_uuid() function is used to look up the secure
partition that provides a given service.

Within this function, memcmp() is used to compare the service
UUIDs but it uses the size of the rdsvc->uuid pointer instead of
the size of its content (missing dereference). This means that only
a partial comparison is performed as UUIDs are 128 bits in length and
rdsvc->uuid is a uint32_t typed pointer.

Instead, use the size of the array pointed to by the svc_uuid parameter,
which will be the full 128 bits, for the comparison.

Change-Id: I258fb0cca3bf19f97b8f2a4c133981647cd050e4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I0cb9f0db1ef3491f55c038a10db5a88d37e89697
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

* changes:
  Document changes to auth-framework
  cot-desc: optimise memory further
  Reduce memory needed for CoT description

Change-Id: I0a81f4ea94d41245cd5150de341b51fc70babffe
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

The data structures in the auth-framework were changed by the previous
patch, and need to be updated.

Change-Id: Icfad2ac688d03d32aa93e45f930a375abbc164a9
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.

memory diff:
bl1:        bl2:
    text        text
      -12         -12
    bss         bss
      -1463       0
    data        data
      -56         -48
    rodata      rodata
      -5688       -2592
    total       total
      -7419       -2652

Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].

Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.

Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.

Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.

memory diff:
bl1:        bl2:
    text        text
      -20         -20
    bss         bss
      -1463       0
    data        data
      -256        -48
    rodata      rodata
      -5240       -1952
    total       total
      -6979       -2020

Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

The Cortex-A12's primary part number is 0xC0D not 0xC0C, so
fix that to make the A12's cpu operations findable.

Change-Id: I4440a039cd57a2fe425fd8a8ec5499ca8e895e31
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The 'drivers/console/aarch64/console.S' is not needed,
so remove it from build to fix the build error when
'ERROR_DEPRECATED'set.

Change-Id: Id047a355f82fd33298b7e2b49eff289d28eb5b56
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

Replace call to pauth_context_save() with pauth_context_restore()
in case of unknown SMC call.

Change-Id: Ib863d979faa7831052b33e8ac73913e2f661f9a0
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

ARMv7 and Cortex-A32(ARMv8/aarch32) uses "arm-linux-gnueabi" toolchain which
has both soft-float and hard-float variants and so there could be scenarios
where soft-float toolchain is used.Even though TF-A documentation recommends
to use hard-float toolchain for aarch32 but there are external projects where
we cannot mandate the selection of toolchain and for those projects at least
the build should not fail.

Current TF-A source fails to build with soft-float toolchain because assembler
does not recognizes "vmsr" instruction which is required to enable floating
point unit.

To avoid this piece of code being compiled with soft-float toolchain add
predefined macro guard " __SOFTFP__" exposed by soft-float toolchain.

Change-Id: I76ba40906a8d622dcd476dd36ab4d277a925996c
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>