GitLab

Add two new functions 'plat_arm_sgi_get_platform_id' and
'plat_arm_sgi_get_config_id' which will be implemented by all the
SGI platforms. These functions can be used to determine the part
number and configuration id of the SGI platforms.

In BL2, these functions are used to populate the 'system-id' node.
In BL31, these functions are used to populate the 'sgi_plat_info_t'
structure with the part number and configuration id of the platform.

Change-Id: I3bacda933527724a3b4074ad4ed5b53a81ea4689
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.

For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.

Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

The headers forked at some point in the past and have diverged a lot. In
order to make it easier to share code between TF-A-Tests and TF-A, this
patch synchronises most of the definitions in the mentioned headers.

This is not a complete sync, it has to be followed by more cleanup.

This patch also removes the read helpers for the AArch32 instructions
ats1cpr and ats1hr (they are write-only).

Change-Id: Id13ecd7aeb83bd2318cd47156d71a42f1c9f6ba2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds support to build a combined BL1
and ROMLIB binary file with the right page
alignment in Juno. When USE_ROMLIB=1 is set for
Juno, it generates the combined file
bl1_romlib.bin which needs to be used instead of
bl1.bin

Change-Id: I407efbe48d3e522fa6ef855538a9587193cb1919
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

Remove the platform common plat_arm_security_setup function to allow
platform specific implementations of the security setup function
implemented in the board directory of the platform.

For use by secure software, configure region0 of DMC-620 trustzone
controller to protect the upper 16MB of memory of the first DRAM block
from non-secure accesses.

Change-Id: I9a8c19656702c4fa4f6917b3655b692d443bb568
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Register a priority level, PLAT_SP_PRI, for secure partition with EL3
exception handling framework(ehf) module.

The secure partition manager(SPM) would raise the core's priority to
PLAT_SP_PRI before entering the secure partition, to protect the core
from getting interrupted while in secure partition.

Change-Id: I686897f052a4371e0efa9b929c07d3ad77249e95
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I2419416fadfcdf64da8b7690a348007591c4edf3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This option allows the Trusted Firmware to directly jump to Linux
kernel for aarch32 without the need of an intermediate loader such
as U-Boot.

Similar to AArch64 ARM_LINUX_KERNEL_AS_BL33 only available with
RESET_TO_SP_MIN=1 as well as BL33 and DTB are preloaded in memory.

Change-Id: I908bc1633696be1caad0ce2f099c34215c8e0633
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

When CSS_USE_SCMI_DRIVER is not defined or set to 0, we get the
following build error.

plat/arm/board/juno/juno_topology.c:16:19: error: ‘CSS_SCMI_PAYLOAD_BASE’ undeclared here (not in a function)
   .scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE,
                   ^~~~~~~~~~~~~~~~~~~~~
plat/arm/board/juno/juno_topology.c:17:38: error: ‘CSS_SCMI_MHU_DB_REG_OFF’ undeclared here (not in a function)
   .db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
                                      ^~~~~~~~~~~~~~~~~~~~~~~
                                      CSS_CPU_PWR_STATE_OFF

Fix the error in order to get function legacy SCPI support functional.

Change-Id: I00cb80db9968aa0be546e33a3a682a2db87719be
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Change-Id: Iae6758ca6395560131d1e1a69a1ecfe50ca8bf83
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I33eaee8e7c983b3042635a448cb8d689ea4e3a12
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The macro EL_IMPLEMENTED() has been deprecated in favour of the new
function el_implemented().

Change-Id: Ic9b1b81480b5e019b50a050e8c1a199991bf0ca9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

No functional changes.

Change-Id: I9b9f8d3dfde08d57706ad5450de6ff858a55ac01
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds support for the N1SDP (NeoVerse N1 System Development
Platform). It is an initial port and additional features are expected
to be added later.

The port includes only BL31 support as the System Control Processor
(SCP) is expected to take the role of primary boatloader

Change-Id: Ife17d8215a7bfcc1420204a72205e7ef920d0c10
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>

This patch enabled PIE for FVP when RESET_TO_BL31=1. The references
to BL31_BASE are replaced by BL31_START as being a symbol exported by
the linker, will create a dynamic relocation entry in .rela.dyn and
hence will be fixed up by dynamic linker at runtime. Also, we disable
RECLAIM_INIT_CODE when PIE is enabled as the init section overlay
creates some static relocations which cannot be handled by the
dynamic linker currently.

Change-Id: I86df1b0a8b2a8bbbe7c3f3c0b9a08c86c2963ec0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch makes use of mov_imm macro where possible to load
immediate values within ARM platform layer.

Change-Id: I02bc7fbc1fa334c9fccf76fbddf515952f9a1298
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds a utility function to return
the address of a symbol. By default, the compiler
generates adr/adrp instruction pair to return
the reference and this utility is used to override
this compiler generated to code and use `ldr`
instruction.

This is needed for Position Independent Executable
when it needs to reference a symbol which is constant
and does not depend on the execute address of the
binary.

For example, on the FVP, the GICv3 register context is
stored in a secure carveout (arm_el3_tzc_dram) within
DDR and does not relocate with the BL image. Now if
BL31 is executing at a different address other than
the compiled address, using adrp/adr instructions to
reference this memory will not work as they generate an
address that is PC relative. The way to get around this
problem is to reference it as non-PC relative (i.e
non-relocatable location) via `ldr` instruction.

Change-Id: I5008a951b007144258121690afb68dc8e12ee6f7
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This function is not related to Arm platforms and can be reused by other
platforms if needed.

Change-Id: Ia9c328ce57ce7e917b825a9e09a42b0abb1a53e8
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

There are several platforms using arm_setup_page_tables(), which is
supposed to be Arm platform only. This creates several dependency
problems between platforms.

This patch adds the definition XLAT_TABLES_LIB_V2 to the xlat tables lib
v2 makefile. This way it is possible to detect from C code which version
is being used and include the correct header.

The file arm_xlat_tables.h has been renamed to xlat_tables_compat.h and
moved to a common folder. This way, when in doubt, this header can be
used to guarantee compatibility, as it includes the correct header based
on XLAT_TABLES_LIB_V2.

This patch also removes the usage of ARM_XLAT_TABLES_V1 from QEMU (so
that is now locked in xlat lib v2) and ZynqMP (where it was added as a
workaround).

Change-Id: Ie1e22a23b44c549603d1402a237a70d0120d3e04
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SGI-Clark.Ares platform is a variant of the SGI-Clark platform. It has
two clusters of four Ares CPUs each. Though very similar to the SGI575
platform, there are subtle differences. HW_CONFIG and TB_FW_CONFIG dts
files have been added.

Change-Id: I740a33cbd1c3b1f1984cb56243b46ad379bab3e6
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

SGI-Clark platform is the next version in the Arm's SGI platform
series. One of the primary difference between the SGI-575 platform and
the SGI-Clark platform is the MHU version (MHUv2 in case of SGI-Clark).
Add the required base support for SGI-Clark platform.

Change-Id: If396e5279fdf801d586662dad0b55195e81371e4
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

On SGI platforms that include Ares CPUs, the 'CORE_PWRDN_EN' bit of
'CPUPWRCTLR_EL1' register requires an explicit write to clear it to
enable hotplug and idle to function correctly.

The reset value of the CORE_PWRDN_EN bit is zero but it still requires
this explicit clear to zero. This indicates that this could be a model
related issue but for now this issue can be fixed be clearing the
CORE_PWRDN_EN bit in the platform specific reset handler function.

Change-Id: I8b9884ae27a2986d789bfec2e9ae792ef930944e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

In Arm platforms the crash console doesn't print anything if the crash
happens early enough. This happens in all images, not only BL1. The
reason is that they the files ``plat/common/aarch64/platform_helpers.S``
and ``plat/arm/common/aarch64/arm_helpers.S``, and the crash console
functions are defined as weak in both files. In practice, the linker
can pick the one in ``plat/common``, which simply switches the multi
console to crash mode when it wants to initialize the crash console.
In the case of Arm platforms, there are no console drivers registered
at that point, so nothing is printed.

This patch makes the functions in plat/arm strong so that they override
the weak functions in plat/common.

Change-Id: Id358db7d2567d7df0951790a695636cf6c9ac57f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Version 1.4.7 of libfdt is bigger than the current one (1.4.2) and the
current reserved space for BL2 in Juno isn't enough to fit the Trusted
Firmware when compiling with clang or armclang.

Change-Id: I7b73394ca60d17f417773f56dd5b3d54495a45a8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The definitions FAIL_CONTROL_*_SHIFT were incorrect, they have been
fixed.

The types tzc_region_attributes_t and tzc_action_t have been removed and
replaced by unsigned int because it is not allowed to do logical
operations on enums.

Also, fix some address definitions in arm_def.h.

Change-Id: Id37941d76883f9fe5045a5f0a4224c133c504d8b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The default values of 'plat_css_scmi_plat_info' is not applicable for
all the platforms. There should be a provision to let platform code to
register a platform specific instance of scmi_channel_plat_info_t.

Add a new API 'plat_css_get_scmi_info' which lets the platform to
register a platform specific instance of scmi_channel_plat_info_t and
remove the default values.

In addition to this, the existing 'plat_css_scmi_plat_info' structure
is removed from the common code and instantiated for the platforms that
need it. This allows for a consistent provisioning of the SCMI channel
information across all the existing and upcoming platforms.

Change-Id: I4fb65d7f2f165b78697b4677f1e8d81edebeac06
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

Dynamically populating the 'system-id' node in the HW_CONFIG dts makes
it difficult to enforce memory overlap checks. So add the system-id node
in the HW_CONFIG dts file as a place holder with 'platform-id' and
'config-id' set to zero.

The code at BL2 stage determines the values of 'platform-id' and
'config-id' at runtime and updates the corresponding fields in the
system-id node of HW_CONFIG dts.

Change-Id: I2ca9980b994ac418da8afa0c72716ede10aff68a
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

To align the placement of ftds files with that of other Arm platforms,
move the ftds files from plat/arm/css/sgi/ to plat/arm/board/sgi575.

Change-Id: Id7c772eb5cf3d308d4e02a3c8099218e889a0e96
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

On SGI platforms, the interconnect is setup by the SCP and so the
existing unused interconnect setup in sgi575 platform code can be
removed. As a result of this, sgi_plat_config.c and sgi_bl1_setup.c
files can be removed as these files are now empty or can be
substainated by the existing weak functions.

Change-Id: I3c883e4d1959d890bf2213a9be01f02551ea3a45
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

In preparation of adding support for upcoming SGI platforms, macros
common to all the SGI platforms are moved into sgi_base_platform_def.h
file. Macros that are specific to sgi575 platform remain in the
platform_def.h file. In addition to this, the platform_def.h file is
moved to sgi575 board directory. Also the ENT_CPU_SOURCES has been
renamed to SGI_CPU_SOURCES and moved from sgi-common.mk to board
specific makefile platform.mk

Change-Id: Iccdd9f070f4feea232b9fbf4fdcc0ef2e8eccbf2
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

When HW_ASSISTED_COHERENCY is enabled we can use spinlocks
instead of using the more complex and slower bakery algorithm.

Change-Id: I9d791a70050d599241169b9160a67e57d5506564
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

macro jump_if_cpu_midr is used commonly by many arm platform.
It has now been relocated to common place to remove duplication
of code.

Change-Id: Ic0876097dbc085df4f90eadb4b7687dde7c726da
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>

Change-Id: Ica944acc474a099219d50b041cfaeabd4f3d362f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

This file is shared between FVP and all CSS platforms. While it may be
true that some definitions can be common, it doesn't make sense
conceptually. For example, the stack size depends on the platform and so
does the SRAM size.

After removing them, there are not enough common definitions to justify
having this header, so the other definitions have been moved to the
platform_def.h of FVP, board_css_def.h and arm_def.h.

Change-Id: Ifbf4b017227f9dfefa1a430f67d7d6baae6a4ba1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This file is only used by Juno as all other CSS platforms have their own
private memory maps.

Change-Id: I1c9f27aac7b1d8bff4d92674e8bde5505b93c8c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".

Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

In the function, bl1_early_platform_setup in the file
plat/arm/css/sgm/sgm_bl1_setup.c:

  plat_config_init();

  arm_bl1_early_platform_setup();

The debug messages logged by plat_config_init() are lost because
the console is initialized in the function
arm_bl1_early_platform_setup()

To see the logs of plat_config_init, this fix re-orders above calls
so that the console is initialized before call to plat_config_init.

Change-Id: I2e98f1f67c591cca24e28905acd0838ea3697a7c
Signed-off-by: Girish Pathak <girish.pathak@arm.com>

This way it can be reused by other platforms if needed.

Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and FVP. In said platforms, the memory is organized as an
interleaved memory of two chips with a 16 bit word.

Any platform that wishes to reuse it with a different configuration will
need to modify the driver so that it is more generic.

Change-Id: Ic721758425864e0cf42b7b9b04bf0d9513b6022e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This lets any future CSS platforms to use RESET_TO_BL31 flag.

Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>