Skip to content

GitLab

Switch branch/tag
  1. 20 Nov, 2018 1 commit
  3. 15 Nov, 2018 4 commits
  5. 14 Nov, 2018 1 commit
    • Sughosh Ganu's avatar
      SPM: Register Secure Partition priority level with ehf module · 5681b292
      Sughosh Ganu authored 
      

Register a priority level, PLAT_SP_PRI, for secure partition with EL3
exception handling framework(ehf) module.

The secure partition manager(SPM) would raise the core's priority to
PLAT_SP_PRI before entering the secure partition, to protect the core
from getting interrupted while in secure partition.

Change-Id: I686897f052a4371e0efa9b929c07d3ad77249e95
Signed-off-by: default avatarSughosh Ganu <sughosh.ganu@arm.com>
      5681b292
  7. 13 Nov, 2018 1 commit
    • Pete Batard's avatar
      rpi3: add RPI3_RUNTIME_UART build option · 6d5c61de
      Pete Batard authored 
      

Some OSes (e.g. Ubuntu 18.04 LTS on Raspberry Pi 3) may disable the
runtime UART in a manner that prevents the system from rebooting if
ATF tries to send runtime messages there.

Also, we don't want the firmware to share the UART with normal
world, as this can be a DoS attack vector into the secure world.

This patch fixes these 2 issues by introducing new build option
RPI3_RUNTIME_UART, that disables the runtime UART by default.

Fixes ARM-software/tf-issues#647
Signed-off-by: default avatarPete Batard <pete@akeo.ie>
      6d5c61de
  9. 09 Nov, 2018 2 commits
    • Yann Gautier's avatar
      stm32mp1: correct some static analysis tools issues · 3e6fab43
      Yann Gautier authored 
      

These issues wer found by sparse:

drivers/st/clk/stm32mp1_clk.c:1524:19:
 warning: incorrect type in assignment (different base types)
    expected restricted fdt32_t const [usertype] *pkcs_cell
    got unsigned int const [usertype] *

plat/st/stm32mp1/plat_image_load.c:13:6:
 warning: symbol 'plat_flush_next_bl_params' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:21:16:
 warning: symbol 'plat_get_bl_image_load_info' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:29:13:
 warning: symbol 'plat_get_next_bl_params' was not declared.
 Should it be static?

plat/st/stm32mp1/bl2_io_storage.c:40:10:
 warning: symbol 'block_buffer' was not declared. Should it be static?
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      3e6fab43
    • Siva Durga Prasad Paladugu's avatar
      arm64: versal: Add support for new Xilinx Versal ACAPs · f91c3cb1
      Siva Durga Prasad Paladugu authored 
      

Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar
Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with
leading-edge memory and interfacing technologies to deliver powerful
heterogeneous acceleration for any application. The Versal AI Core series has
five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm
Cortex-A72 application processors, dual-core Arm Cortex-R5 real-time
processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines
optimized for high-precision floating point with low latency.

This patch adds Virtual QEMU platform support for
this SoC "versal_virt".
Signed-off-by: default avatarSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      f91c3cb1
  11. 08 Nov, 2018 4 commits
  13. 06 Nov, 2018 3 commits
  15. 05 Nov, 2018 1 commit
  17. 01 Nov, 2018 4 commits
  19. 31 Oct, 2018 2 commits
  21. 30 Oct, 2018 5 commits
  23. 29 Oct, 2018 5 commits
    • Antonio Nino Diaz's avatar
      plat/arm: Fix MISRA defects in SiP SVC handler · 15b94cc1
      Antonio Nino Diaz authored 
      

No functional changes.

Change-Id: I9b9f8d3dfde08d57706ad5450de6ff858a55ac01
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      15b94cc1
    • Deepak Pandey's avatar
      plat/arm: Introduce the N1SDP. · 80d37c28
      Deepak Pandey authored 
      

This patch adds support for the N1SDP (NeoVerse N1 System Development
Platform). It is an initial port and additional features are expected
to be added later.

The port includes only BL31 support as the System Control Processor
(SCP) is expected to take the role of primary boatloader

Change-Id: Ife17d8215a7bfcc1420204a72205e7ef920d0c10
Signed-off-by: default avatarDeepak Pandey <Deepak.Pandey@arm.com>
      80d37c28
    • Soby Mathew's avatar
      FVP: Enable PIE for RESET_TO_BL31=1 · fc922ca8
      Soby Mathew authored 
      

This patch enabled PIE for FVP when RESET_TO_BL31=1. The references
to BL31_BASE are replaced by BL31_START as being a symbol exported by
the linker, will create a dynamic relocation entry in .rela.dyn and
hence will be fixed up by dynamic linker at runtime. Also, we disable
RECLAIM_INIT_CODE when PIE is enabled as the init section overlay
creates some static relocations which cannot be handled by the
dynamic linker currently.

Change-Id: I86df1b0a8b2a8bbbe7c3f3c0b9a08c86c2963ec0
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      fc922ca8
    • Soby Mathew's avatar
      plat/arm: Use `mov_imm` macro to load immediate values · bd83b396
      Soby Mathew authored 
      

This patch makes use of mov_imm macro where possible to load
immediate values within ARM platform layer.

Change-Id: I02bc7fbc1fa334c9fccf76fbddf515952f9a1298
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      bd83b396
    • Soby Mathew's avatar
      Add helper to return reference to a symbol · 6a7b3005
      Soby Mathew authored 
      

This patch adds a utility function to return
the address of a symbol. By default, the compiler
generates adr/adrp instruction pair to return
the reference and this utility is used to override
this compiler generated to code and use `ldr`
instruction.

This is needed for Position Independent Executable
when it needs to reference a symbol which is constant
and does not depend on the execute address of the
binary.

For example, on the FVP, the GICv3 register context is
stored in a secure carveout (arm_el3_tzc_dram) within
DDR and does not relocate with the BL image. Now if
BL31 is executing at a different address other than
the compiled address, using adrp/adr instructions to
reference this memory will not work as they generate an
address that is PC relative. The way to get around this
problem is to reference it as non-PC relative (i.e
non-relocatable location) via `ldr` instruction.

Change-Id: I5008a951b007144258121690afb68dc8e12ee6f7
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      6a7b3005
  25. 26 Oct, 2018 7 commits