GitLab

Changed the fvp_config array in fvp_common.c into a struct and
moved into a new optional common platform header,
include/plat/common/plat_config.h. Removed the config definitions
in fvp_def.h and updated all references to the platform config.

This makes the interface to the platform config cleaner and uses
a little less RAM.

Fixes ARM-software/tf-issues#180

Change-Id: I58dd7b3c150f24f7ee230a26fd57c827853ba803

Making the simple mmio_read_*() and mmio_write_*() functions inline
saves 360 bytes of code in FVP release build.

Fixes ARM-software/tf-issues#210

Change-Id: I65134f9069f3b2d8821d882daaa5fdfe16355e2f

Exclude stdlib files because they do not follow kernel code style.

Fixes ARM-software/tf-issues#73

Change-Id: I4cfafa38ab436f5ab22c277cb38f884346a267ab

The bakery lock code currently expects the calling code to pass
the MPIDR_EL1 of the current CPU.

This is not always done correctly. Also the change to provide
inline access to system registers makes it more efficient for the
bakery lock code to obtain the MPIDR_EL1 directly.

This change removes the mpidr parameter from the bakery lock
interface, and results in a code reduction of 160 bytes for the
ARM FVP port.

Fixes ARM-software/tf-issues#213

Change-Id: I7ec7bd117bcc9794a0d948990fcf3336a367d543

The array of affinity nodes is currently allocated for 32 entries
with the PSCI_NUM_AFFS value defined in psci.h. This is not enough
for large systems, and will substantially over allocate the array
for small systems.

This patch introduces an optional platform definition
PLATFORM_NUM_AFFS to platform_def.h. If defined this value is
used for PSCI_NUM_AFFS, otherwise a value of two times the number
of CPU cores is used.

The FVP port defines PLATFORM_NUM_AFFS to be 10 which saves
nearly 1.5KB of memory.

Fixes ARM-software/tf-issues#192

Change-Id: I68e30ac950de88cfbd02982ba882a18fb69c1445

Consolidate all BL3-1 CPU context initialization for cold boot, PSCI
and SPDs into two functions:
*  The first uses entry_point_info to initialize the relevant
   cpu_context for first entry into a lower exception level on a CPU
*  The second populates the EL1 and EL2 system registers as needed
   from the cpu_context to ensure correct entry into the lower EL

This patch alters the way that BL3-1 determines which exception level
is used when first entering EL1 or EL2 during cold boot - this is now
fully determined by the SPSR value in the entry_point_info for BL3-3,
as set up by the platform code in BL2 (or otherwise provided to BL3-1).

In the situation that EL1 (or svc mode) is selected for a processor
that supports EL2, the context management code will now configure all
essential EL2 register state to ensure correct execution of EL1. This
allows the platform code to run non-secure EL1 payloads directly
without requiring a small EL2 stub or OS loader.

Change-Id: If9fbb2417e82d2226e47568203d5a369f39d3b0f

The crash reporting support and early initialisation of the
cpu_data allow the runtime_exception vectors to be used from
the start in BL3-1, removing the need for the additional
early_exception vectors and 2KB of code from BL3-1.

Change-Id: I5f8997dabbaafd8935a7455910b7db174a25d871

Moving the context pointers for each CPU into the per-cpu data
allows for much more efficient access to the contexts for the
current CPU.

Change-Id: Id784e210d63cbdcddb44ac1591617ce668dbc29f

This patch prepares the per-cpu pointer cache for wider use by:
* renaming the structure to cpu_data and placing in new header
* providing accessors for this CPU, or other CPUs
* splitting the initialization of the TPIDR pointer from the
  initialization of the cpu_data content
* moving the crash stack initialization to a crash stack function
* setting the TPIDR pointer very early during boot

Change-Id: Icef9004ff88f8eb241d48c14be3158087d7e49a3

All callers of cm_get_context() pass the calling CPU MPIDR to the
function. Providing a specialised version for the current
CPU results in a reduction in code size and better readability.

The current function has been renamed to cm_get_context_by_mpidr()
and the existing name is now used for the current-CPU version.

The same treatment has been done to cm_set_context(), although
only both forms are used at present in the PSCI and TSPD code.

Change-Id: I91cb0c2f7bfcb950a045dbd9ff7595751c0c0ffb

Replace the current out-of-line assembler implementations of
the system register and system instruction operations with
inline assembler.

This enables better compiler optimisation and code generation
when accessing system registers.

Fixes ARM-software/tf-issues#91

Change-Id: I149af3a94e1e5e5140a3e44b9abfc37ba2324476

Current ATF uses a direct physical-to-virtual mapping, that is, a physical
address is mapped to the same address in the virtual space. For example,
physical address 0x8000_0000 is mapped to 0x8000_0000 virtual. This
approach works fine for FVP as all its physical addresses fall into 0 to
4GB range. But for other platform where all I/O addresses are 48-bit long,
If we follow the same direct mapping, we would need virtual address range
from 0 to 0x8fff_ffff_ffff, which is about 144TB. This requires a
significant amount of memory for MMU tables and it is not necessary to use
that much virtual space in ATF.

The patch is to enable mapping a physical address range to an arbitrary
virtual address range (instead of flat mapping)
Changed "base" to "base_va" and added "base_pa" in mmap_region_t and
modified functions such as mmap_add_region and init_xlation_table etc.
Fixes ARM-software/tf-issues#158

Rename the ic_* platform porting functions to plat_ic_* to be
consistent with the other functions in platform.h. Also rename
bl31_get_next_image_info() to bl31_plat_get_next_image_ep_info()
and remove the duplicate declaration in bl31.h.

Change-Id: I4851842069d3cff14c0a468daacc0a891a7ede84

Remove the FVP specific comments in platform.h since this file
is re-usable across all platforms.

Change-Id: Ifd4a4f72562adb3ecf8b9078b0150f170ef22dba

Previously, the enable_mmu_elX() functions were implicitly part of
the platform porting layer since they were included by generic
code. These functions have been placed behind 2 new platform
functions, bl31_plat_enable_mmu() and bl32_plat_enable_mmu().
These are weakly defined so that they can be optionally overridden
by platform ports.

Also, the enable_mmu_elX() functions have been moved to
lib/aarch64/xlat_tables.c for optional re-use by platform ports.
These functions are tightly coupled with the translation table
initialization code.

Fixes ARM-software/tf-issues#152

Change-Id: I0a2251ce76acfa3c27541f832a9efaa49135cc1c

Some platform porting functions were in BL specific header files.
These have been moved to platform.h so that all porting functions
are in the same place. The functions are now grouped by BL.
Obsolete BL headers files have been removed.

Also, the weak declaration of the init_bl2_mem_layout() function
has been moved out the header file and into the source file
(bl_common.c) using the more succinct #pragma syntax. This
mitigates the risk of 2 weak definitions being created and the
wrong one being picked up by the compiler.

Change-Id: Ib19934939fd755f3e5a5a5bceec88da684308a83

Previously, platform.h contained many declarations and definitions
used for different purposes. This file has been split so that:

* Platform definitions used by common code that must be defined
  by the platform are now in platform_def.h. The exact include
  path is exported through $PLAT_INCLUDES in the platform makefile.

* Platform definitions specific to the FVP platform are now in
  /plat/fvp/fvp_def.h.

* Platform API declarations specific to the FVP platform are now
  in /plat/fvp/fvp_private.h.

* The remaining platform API declarations that must be ported by
  each platform are still in platform.h but this file has been
  moved to /include/plat/common since this can be shared by all
  platforms.

Change-Id: Ieb3bb22fbab3ee8027413c6b39a783534aee474a

Some data variables were declared but not used. These have been
removed.

Change-Id: I038632af3c32d88984cd25b886c43ff763269bf9

Function declarations implicitly have external linkage so do not
need the extern keyword.

Change-Id: Ia0549786796d8bf5956487e8996450a0b3d79f32

The TSP has a number of entrypoints used by the TSP on different
occasions. These were provided to the TSPD as a table of function
pointers, and required the TSPD to read the entry in the table,
which is in TSP memory, in order to program the exception return
address.

Ideally, the TSPD has no access to the TSP memory.

This patch changes the table of function pointers into a vector
table of single instruction entrypoints. This allows the TSPD to
calculate the entrypoint address instead of read it.

Fixes ARM-software/tf-issues#160

Change-Id: Iec6e055d537ade78a45799fbc6f43765a4725ad3

Implements support for Non Secure Interrupts preempting the
Standard SMC call in EL1. Whenever an IRQ is trapped in the
Secure world we securely handover to the Normal world
to process the interrupt. The normal world then issues
"resume" smc call to resume the previous interrupted SMC call.
Fixes ARM-software/tf-issues#105

Change-Id: I72b760617dee27438754cdfc9fe9bcf4cc024858

This patch adds support in the TSPD for registering a handler for
S-EL1 interrupts. This handler ferries the interrupts generated in the
non-secure state to the TSP at 'tsp_fiq_entry'. Support has been added
to the smc handler to resume execution in the non-secure state once
interrupt handling has been completed by the TSP.

There is also support for resuming execution in the normal world if
the TSP receives a EL3 interrupt. This code is currently unused.

Change-Id: I816732595a2635e299572965179f11aa0bf93b69

This patch adds support in the TSP for handling S-EL1 interrupts
handed over by the TSPD. It includes GIC support in its platform port,
updates various statistics related to FIQ handling, exports an entry
point that the TSPD can use to hand over interrupts and defines the
handover protocol w.r.t what context is the TSP expected to preserve
and the state in which the entry point is invoked by the TSPD.

Change-Id: I93b22e5a8133400e4da366f5fc862f871038df39

This patch adds support in the TSP to program the secure physical
generic timer to generate a EL-1 interrupt every half second. It also
adds support for maintaining the timer state across power management
operations. The TSPD ensures that S-EL1 can access the timer by
programming the SCR_EL3.ST bit.

This patch does not actually enable the timer. This will be done in a
subsequent patch once the complete framework for handling S-EL1
interrupts is in place.

Change-Id: I1b3985cfb50262f60824be3a51c6314ce90571bc

This patch adds a common handler for FIQ and IRQ exceptions in the
BL3-1 runtime exception vector table. This function determines the
interrupt type and calls its handler. A crash is reported if an
inconsistency in the interrupt management framework is detected. In
the event of a spurious interrupt, execution resumes from the
instruction where the interrupt was generated.

This patch also removes 'cm_macros.S' as its contents have been moved
to 'runtime_exceptions.S'

Change-Id: I3c85ecf8eaf43a3fac429b119ed0bd706d2e2093

This patch introduces a set of functions which allow generic firmware
code e.g. the interrupt management framework to access the platform
interrupt controller. APIs for finding the type and id of the highest
pending interrupt, acknowledging and EOIing an interrupt and finding
the security state of an interrupt have been added. It is assumed that
the platform interrupt controller implements the v2.0 of the ARM GIC
architecture specification. Support for v3.0 of the specification for
managing interrupts in EL3 and the platform port will be added in the
future.

Change-Id: Ib3a01c2cf3e3ab27806930f1be79db2b29f91bcf

This patch introduces a framework for registering interrupts routed to
EL3. The interrupt routing model is governed by the SCR_EL3.IRQ and
FIQ bits and the security state an interrupt is generated in. The
framework recognizes three type of interrupts depending upon which
exception level and security state they should be handled in
i.e. Secure EL1 interrupts, Non-secure interrupts and EL3
interrupts. It provides an API and macros that allow a runtime service
to register an handler for a type of interrupt and specify the routing
model. The framework validates the routing model and uses the context
management framework to ensure that it is applied to the SCR_EL3 prior
to entry into the target security state. It saves the handler in
internal data structures. An API is provided to retrieve the handler
when an interrupt of a particular type is asserted. Registration is
expected to be done once by the primary CPU. The same handler and
routing model is used for all CPUs.

Support for EL3 interrupts will be added to the framework in the
future. A makefile flag has been added to allow the FVP port choose
between ARM GIC v2 and v3 support in EL3. The latter version is
currently unsupported.

A framework for handling interrupts in BL3-1 will be introduced in
subsequent patches. The default routing model in the absence of any
handlers expects no interrupts to be routed to EL3.

Change-Id: Idf7c023b34fcd4800a5980f2bef85e4b5c29e649

This patch adds an API to write to any bit in the SCR_EL3 member of
the 'cpu_context' structure of the current CPU for a specified
security state. This API will be used in subsequent patches which
introduce interrupt management in EL3 to specify the interrupt routing
model when execution is not in EL3.

It also renames the cm_set_el3_elr() function to cm_set_elr_el3()
which is more in line with the system register name being targeted by
the API.

Change-Id: I310fa7d8f827ad3f350325eca2fb28cb350a85ed

This change adds optional reset vector support to BL3-1
which means BL3-1 entry point can detect cold/warm boot,
initialise primary cpu, set up cci and mail box.

When using BL3-1 as a reset vector it is assumed that
the BL3-1 platform code can determine the location of
the BL3-2 images, or load them as there are no parameters
that can be passed to BL3-1 at reset.

It also fixes the incorrect initialisation of mailbox
registers on the FVP platform

This feature can be enabled by building the code with
make variable RESET_TO_BL31 set as 1

Fixes ARM-software/TF-issues#133
Fixes ARM-software/TF-issues#20

Change-Id: I4e23939b1c518614b899f549f1e8d412538ee570

The issues addressed in this patch are:

1. Remove meminfo_t from the common interfaces in BL3-x,
expecting that platform code will find a suitable mechanism
to determine the memory extents in these images and provide
it to the BL3-x images.

2. Remove meminfo_t and bl31_plat_params_t from all FVP BL3-x
code as the images use link-time information to determine
memory extents.

meminfo_t is still used by common interface in BL1/BL2 for
loading images

Change-Id: I4e825ebf6f515b59d84dc2bdddf6edbf15e2d60f

This patch is based on spec published at
https://github.com/ARM-software/tf-issues/issues/133

It rearranges the bl31_args struct into
bl31_params and bl31_plat_params which provide the
information needed for Trusted firmware and platform
specific data via x0 and x1

On the FVP platform BL3-1 params and BL3-1 plat params
and its constituents are stored at the start of TZDRAM.

The information about memory availability and size for
BL3-1, BL3-2 and BL3-3 is moved into platform specific data.

Change-Id: I8b32057a3d0dd3968ea26c2541a0714177820da9

This patch reworks the handover interface from: BL1 to BL2 and
BL2 to BL3-1. It removes the raise_el(), change_el(), drop_el()
and run_image() functions as they catered for code paths that were
never exercised.
BL1 calls bl1_run_bl2() to jump into BL2 instead of doing the same
by calling run_image(). Similarly, BL2 issues the SMC to transfer
execution to BL3-1 through BL1 directly. Only x0 and x1 are used
to pass arguments to BL31. These arguments and parameters for
running BL3-1 are passed through a reference to a
'el_change_info_t' structure. They were being passed value in
general purpose registers earlier.

Change-Id: Id4fd019a19a9595de063766d4a66295a2c9307e1

This patch introduces macros (SPSR_64 and SPSR_32) to
create a SPSR for both aarch32 and aarch64 execution
states. These macros allow the user to set fields
in the SPSR depending upon its format.
The make_spsr() function which did not allow
manipulation of all the fields in the aarch32 SPSR
has been replaced by these new macros.

Change-Id: I9425dda0923e8d5f03d03ddb8fa0e28392c4c61e

Addresses were declared as "unsigned int" in drivers/arm/peripherals/pl011/pl011.h and in function init_xlation_table. Changed to use "unsigned long" instead
Fixes ARM-software/tf-issues#156

At present, non-secure timer register contents are saved and restored as
part of world switch by BL3-1. This effectively means that the
non-secure timer stops, and non-secure timer interrupts are prevented
from asserting until BL3-1 switches back, introducing latency for
non-secure services. Often, secure world might depend on alternate
sources for secure interrupts (secure timer or platform timer) instead
of non-secure timers, in which case this save and restore is
unnecessary.

This patch introduces a boolean build-time configuration NS_TIMER_SWITCH
to choose whether or not to save and restore non-secure timer registers
upon world switch. The default choice is made not to save and restore
them.

Fixes ARM-software/tf-issues#148

Change-Id: I1b9d623606acb9797c3e0b02fb5ec7c0a414f37e

This patch implements the register reporting when unhandled exceptions are
taken in BL3-1. Unhandled exceptions will result in a dump of registers
to the console, before halting execution by that CPU. The Crash Stack,
previously called the Exception Stack, is used for this activity.
This stack is used to preserve the CPU context and runtime stack
contents for debugging and analysis.

This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3,
to provide easy access to some of BL3-1 per-cpu data structures.
Initially, this is used to provide a pointer to the Crash stack.

panic() now prints the the error file and line number in Debug mode
and prints the PC value in release mode.

The Exception Stack is renamed to Crash Stack with this patch.
The original intention of exception stack is no longer valid
since we intend to support several valid exceptions like IRQ
and FIQ in the trusted firmware context. This stack is now
utilized for dumping and reporting the system state when a
crash happens and hence the rename.

Fixes ARM-software/tf-issues#79 Improve reporting of unhandled exception

Change-Id: I260791dc05536b78547412d147193cdccae7811a

This patch fixes the broken support for entry into standby states
introduced under commit-id 'd118f9f8' (tf-issues#94). Upon exit from
the platform defined standby state instead of returning to the caller
of the SMC, execution would get stuck in the wfi instruction meant for
entering a power down state. This patch ensures that exit from a
standby state and entry into a power down state do not interfere with
each other.

Fixes ARM-software/tf-issues#154

Change-Id: I56e5df353368e44d6eefc94ffedefe21929f5cfe

The goal of these macros is to improve code readability by providing
a concise way to check whether we are running in the expected
exception level.

Change-Id: If9aebadfb6299a5196e9a582b442f0971d9909b1

Previously exception handlers in BL3-1, X19-X29 were not saved
and restored on every SMC/trap into EL3. Instead these registers
were 'saved as needed' as a side effect of the A64 ABI used by the C
compiler.

That approach failed when world switching but was not visible
with the TSP/TSPD code because the TSP is 64-bit, did not
clobber these registers when running and did not support pre-emption
by normal world interrupts. These scenarios showed
that the values in these registers can be passed through a world
switch, which broke the normal and trusted world assumptions
about these registers being preserved.

The Ideal solution saves and restores these registers when a
world switch occurs - but that type of implementation is more complex.
So this patch always saves and restores these registers on entry and
exit of EL3.

Fixes ARM-software/tf-issues#141

Change-Id: I9a727167bbc594454e81cf78a97ca899dfb11c27

'PL011_BASE' macro is no longer used because the right UART base
address is now directly given to the 'console_init()' function.
This patch removes it.

Change-Id: I94759c99602df4876291a56f9f6a75de337a65ec