poplar: Add BL32 (OP-TEE) support and misc updates

Makefile: Add ability to build dtb (v2)

Signed-off-by: Victor Chong <victor.chong@linaro.org>

The security properties of some IP blocks are configured to secure mode
after reset. This means these IP blocks can only be accessed by cpus
in secure state by default. These should be configured correclty as needed.
Signed-off-by: y00241285 <yyangwei.yangwei@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>

This is currently the maximum allowed without affecting bootup.
Signed-off-by: Victor Chong <victor.chong@linaro.org>

to PLAT_POPLAR_NS_IMAGE_OFFSET
Signed-off-by: Victor Chong <victor.chong@linaro.org>

Per
https://github.com/sdrobertw/Poplar/blob/master/HardwareDocs/Processor_Datasheet_v2XX.pdf


there are 13 groups of GPIO controllers, not 12.
Signed-off-by: Victor Chong <victor.chong@linaro.org>

Enable SVE for Non-secure world

SPM: Move S-EL1/S-EL0 xlat tables to TZC DRAM

fvp: Disable SYSTEM_SUSPEND when ARM_BL31_IN_DRAM 

SDEI: Fix return value of reset calls

poplar: Fix format of documentation

Unify cache flush code path after image load

ARM Platforms: Change the TZC access permissions for EL3 payload

Rename some macros in SPM code

rockchip: Include stdint header in plat_sip_calls.c

Replace magic numbers in linkerscripts by PAGE_SIZE

Hikey960: Change to use recommended power state id format

 Miscellaneous fixes to maintainers.rst

* Update the RockChip sub-maintainer from rkchrome to rockchip-linux
in maintainers.rst.

* Add missing documentation files and change extensions from `md` to `rst`.

* Add sub-maintainer for Socionext UniPhier platform.

Change-Id: I7f498316acb0f7947c6432dbe14988e61a8903fe
Co-Authored-By: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Dan Handley <dan.handley@arm.com>

A new platform define, `PLAT_SP_IMAGE_XLAT_SECTION_NAME`, has been
introduced to select the section where the translation tables used by
the S-EL1/S-EL0 are placed.

This define has been used to move the translation tables to DRAM secured
by TrustZone.

Most of the extra needed space in BL31 when SPM is enabled is due to the
large size of the translation tables. By moving them to this memory
region we can save 44 KiB.

A new argument has been added to REGISTER_XLAT_CONTEXT2() to specify the
region where the translation tables have to be placed by the linker.

Change-Id: Ia81709b4227cb8c92601f0caf258f624c0467719
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Update Xilinx maintainer details

The document was being rendered incorrectly.

Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

After returning from SYSTEM_SUSPEND state, BL31 reconfigures the
TrustZone Controller during the boot sequence. If BL31 is placed in
TZC-secured DRAM, it will try to change the permissions of the memory it
is being executed from, causing an exception.

The solution is to disable SYSTEM_SUSPEND when the Trusted Firmware has
been compiled with ``ARM_BL31_IN_DRAM=1``.

Change-Id: I96dc50decaacd469327c6b591d07964726e58db4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Common code mustn't include ARM platforms headers.

Change-Id: Ib6e4f5a77c2d095e6e8c3ad89c89cb1959cd3043
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

At present, both SDEI_PRIVATE_RESET and SDEI_SHARED_RESET returns
SDEI_PENDING if they fail to unregister an event. The SDEI specification
however requires that the APIs return SDEI_EDENY in these cases. This
patch fixes the return codes for the reset APIs.

Change-Id: Ic14484c91fa8396910387196c256d1ff13d03afd
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

ARM Power State Coordination Interface (ARM DEN 0022D) chapter
6.5 "Recommended StateID Encoding" defines the state ID which can be
used by platforms. The recommended power states can be presented by
below values; and it divides into three fields, every field has 4 bits
to present power states corresponding to core level, cluster level and
system level.

  0: Run
  1: Standby
  2: Retention
  3: Powerdown

This commit changes to use upper recommended power states definition on
Hikey960; and changes the power state validate function to check the
power state passed from kernel side.
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Introduce AArch64 Raspberry Pi 3 port

Previously the cache flush happened in 2 different places in code
depending on whether TRUSTED_BOARD_BOOT is enabled or not. This
patch unifies this code path for both the cases. The `load_image()`
function is now made an internal static function.

Change-Id: I96a1da29d29236bbc34b1c95053e6a9a7fc98a54
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch allows non-secure bus masters to access TZC region0 as well
as the EL3 Payload itself.

Change-Id: I7e44f2673a2992920d41503fb4c57bd7fb30747a
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Rename SP_COMMUNICATE_AARCH32/AARCH64 into MM_COMMUNICATE_AARCH32/AARCH64
to align with the MM specification [1].

[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf



Change-Id: I478aa4024ace7507d14a5d366aa8e20681075b03
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

The defines have been renamed to match the names used in the
documentation.

Change-Id: I2f18b65112d2db040a89d5a8522e9790c3e21628
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Replace macro ASM_ASSERTION with macro ENABLE_ASSERTIONS

This includes the stdint header to declare the various types used within
the file, preventing build errors with recent GCC versions.

Change-Id: I9e7e92bb31deb58d4ff2732067dd88b53124bcc9
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

Added design documentation and usage guide for the AArch64 port of the
Arm Trusted Firmware to the Raspberry Pi 3.

Change-Id: I1be60fbbd54c797b48a1bcebfb944d332616a0de
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This port can be compiled to boot an AArch64 or AArch32 payload with the
build option `RPI3_BL33_AARCH32`.

Note: This is not a secure port of the Trusted Firmware. This port is
only meant to be a reference implementation to experiment with an
inexpensive board in real hardware.

Change-Id: Ide58114299289bf765ef1366199eb05c46f81903
Co-authored-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix issues for AArch32 builds on ARM platforms

Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.

This has a minor performance improvement with no functional
impact.

Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: David Cunado <david.cunado@arm.com>

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.

If SVE is implemented, EL3 will do the following:

- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.

- Exit from Non-secure world: SIMD, FP and SVE functionality is
  disabled. As SIMD and FP registers are part of the SVE Z-registers
  then any use of SIMD / FP functionality would corrupt the SVE
  registers.

The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.

This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.

Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. ...

This patch updates Xilinx maintainers details
as sorenb is no more the maintainer for xilinx
and the email id is invalid now.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>