1. 31 Jan, 2019 10 commits
    • Varun Wadekar's avatar
      Tegra210: move sc7entry-fw inside the TZDRAM fence · 7350277b
      Varun Wadekar authored
      
      
      This patch uses the sc7entry-fw base/size values to calculate the
      TZDRAM fence, so as to move sc7entry-fw inside the TZDRAM fence.
      
      Change-Id: I91aeeeece857076c478cdc4c18a6ad70dc265031
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      7350277b
    • kalyani chidambaram's avatar
      Tegra210: SiP handlers to allow PMC access · fdc08e2e
      kalyani chidambaram authored
      
      
      This patch adds SiP handler for Tegra210 platforms to service
      read/write requests for PMC block. None of the secure registers
      are accessible to the NS world though.
      
      Change-Id: I7dc1f10c6a6ee6efc642ddcfb1170fb36d3accff
      Signed-off-by: default avatarkalyani chidambaram <kalyanic@nvidia.com>
      fdc08e2e
    • Varun Wadekar's avatar
      Tegra210: power off all DMA masters before System Suspend entry · 2d5560f9
      Varun Wadekar authored
      
      
      This patch puts all the DMA masters in reset before starting the System
      Suspend sequence. This helps us make sure that there are no rogue agents
      in the system trying to over-write the SC7 Entry Firmware with their own.
      
      Change-Id: I7eb39999d229951e612fbfeb9f86c4efb8f98b5a
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      2d5560f9
    • Varun Wadekar's avatar
      Tegra: support for System Suspend using sc7entry-fw binary · 3ca3c27c
      Varun Wadekar authored
      
      
      This patch adds support to enter System Suspend on Tegra210 platforms
      without the traditional BPMP firmware. The BPMP firmware will no longer
      be supported on Tegra210 platforms and its functionality will be
      divided across the CPU and sc7entry-fw.
      
      The sc7entry-fw takes care of performing the hardware sequence required
      to enter System Suspend (SC7 power state) from the COP. The CPU is required
      to load this firmware to the internal RAM of the COP and start the sequence.
      The CPU also make sure that the COP is off after cold boot and is only
      powered on when we want to start the actual System Suspend sequence.
      
      The previous bootloader loads the firmware to TZDRAM and passes its base and
      size as part of the boot parameters. The EL3 layer is supposed to sanitize
      the parameters before touching the firmware blob.
      
      To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
      program PMC's scratch register #210, with appropriate values. Without these
      settings the warmboot code wont be able to get the device out of System
      Suspend.
      
      Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      3ca3c27c
    • Varun Wadekar's avatar
      Tegra210: remove support for cluster power down · 93e3b0f3
      Varun Wadekar authored
      
      
      This patch removes support for powering down a CPU cluster on
      Tegra210 platforms as none of them actually use it.
      
      Change-Id: I9665634cf2b5b7b8a1b5a2700cae152dc9165fe3
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      93e3b0f3
    • Varun Wadekar's avatar
      Tegra210: support for cluster idle from the CPU · 7db077f2
      Varun Wadekar authored
      
      
      This patch adds support to enter/exit to/from cluster idle power
      state on Tegra210 platforms that do not load BPMP firmware.
      
      The CPU initates the cluster idle sequence on the last standing
      CPU, by following these steps:
      
      Entry
      -----
      * stop other CPUs from waking up
      * program the PWM pinmux to tristate for OVR PMIC
      * program the flow controller to enter CC6 state
      * skip L1 $ flush during cluster power down, as L2 $ is inclusive
        of L1 $ on Cortex-A57 CPUs
      
      Exit
      ----
      * program the PWM pinmux to un-tristate for OVR PMIC
      * allow other CPUs to wake up
      
      This patch also makes sure that cluster idle state entry is not
      enabled until CL-DVFS is ready.
      
      Change-Id: I54cf31bf72b4a09d9bf9d2baaed6ee5a963c7808
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      7db077f2
    • Varun Wadekar's avatar
      Tegra: organize memory/mmio apertures to decrease memmap latency · 26cf0849
      Varun Wadekar authored
      
      
      This patch organizes the memory and mmio maps linearly, to make the
      mmap_add_region process faster. The microsecond timer has been moved
      to individual platforms instead of making it a common step, as it
      further speeds up the memory map creation process.
      
      Change-Id: I6fdaee392f7ac5d99daa182380ca9116a001f5d6
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      26cf0849
    • Varun Wadekar's avatar
      Tegra210: Enable WDT_CPU interrupt for FIQ Debugger · 51a5e593
      Varun Wadekar authored
      
      
      This patch enables the watchdog timer's interrupt as an FIQ
      interrupt to the CPU. The interrupt generated by the watchdog
      is connected to the flow controller for power management reasons,
      and needs to be routed to the GICD for it to reach the CPU.
      
      Change-Id: I9437b516da2c5d763eca72694ed7f3c7389b3d9e
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      51a5e593
    • Varun Wadekar's avatar
      Tegra: fiq_glue: support to handle LEGACY_FIQ PPIs for Tegra SoCs · d16b045c
      Varun Wadekar authored
      
      
      This patch adds support to handle secure PPIs for Tegra watchdog timers. This
      functionality is currently protected by the ENABLE_WDT_LEGACY_FIQ_HANDLING
      configuration variable and is only enabled for Tegra210 platforms, for now.
      
      Change-Id: I0752ef54a986c58305e1bc8ad9be71d4a8bbd394
      Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      d16b045c
    • Pritesh Raithatha's avatar
      Tegra186: smmu: add support for backup multiple smmu regs · 28f45bb8
      Pritesh Raithatha authored
      
      
      Modifying smmu macros to pass base address of smmu so that it can be
      used with multiple smmus.
      
      Added macro for combining smmu backup regs that can be used for multiple
      smmus.
      
      Change-Id: I4f3bb83d66d5df14a3b91bc82f7fc26ec8e4592e
      Signed-off-by: default avatarPritesh Raithatha <praithatha@nvidia.com>
      28f45bb8
  2. 23 Jan, 2019 16 commits
  3. 18 Jan, 2019 14 commits