- 28 Sep, 2018 7 commits
-
-
Antonio Nino Diaz authored
Change-Id: I2d4a21a80a768bc422e9707e6d7e98d20a716275 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I8ec8b4439ca1d7606aae069c2c576a9a8b18c92c Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
The affected interfaces are bl31_early_platform_setup(), sp_min_early_platform_setup() and bl2_early_platform_setup(). Change-Id: I50c01ec68bcbe97fe4e5d101bcd0f763358b8e1e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I567a406edb090ae9d109382f6874846a79dd7473 Co-authored-by: Roberto Vargas <roberto.vargas@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Roberto Vargas authored
The code of LOAD_IMAGE_V2=0 has been removed. Change-Id: Iea03e5bebb90c66889bdb23f85c07d0c9717fffe Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I9fd8016527ad7706494f34356fdae8efacef5f72 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Roberto Vargas authored
Change-Id: I40d040aa05bcbf11536a96ce59827711456b93a8 Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 20 Sep, 2018 1 commit
-
-
Yann Gautier authored
PAR register used here is a 64 bit register. On AARCH32 BIT macro is BIT_32. PAR_ADDR_MASK should then use BIT_64 to avoid overflow. Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 07 Sep, 2018 2 commits
-
-
Sathees Balya authored
The patch 7b56928a unified the FWU mechanism on FVP and Juno platforms due to issues with MCC firmware not preserving the NVFLAGS. With MCCv150 firmware, this issue is resolved. Also writing to the NOR flash while executing from the same flash in Bypass mode had some stability issues. Hence, since the MCC firmware issue is resolved, this patch reverts to the NVFLAGS mechanism to detect FWU. Also, with the introduction of SDS (Shared Data Structure) by the SCP, the reset syndrome needs to queried from the appropriate SDS field. Change-Id: If9c08f1afaaa4fcf197f3186887068103855f554 Signed-off-by: Sathees Balya <sathees.balya@arm.com> Signed-off-by: Soby Mathew <Soby.Mathew@arm.com>
-
John Tsichritzis authored
After introducing the Mbed TLS shared heap optimisation, reducing BL2 size by 3 pages didn't leave enough space for growth. We give 1 page back to maximum BL2 size. Change-Id: I4f05432f00b923693160f69a4e4ec310a37a2b16 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
- 05 Sep, 2018 4 commits
-
-
Icenowy Zheng authored
The Marvell A8K SoCs use the MI2CV IP core from Mentor Graphics, which is also used by Allwinner. As Mentor Graphics allows a lot of customization, the MI2CV in the two SoC families are not compatible, and driver modifications are needed. Extract the common code to a MI2CV driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-
Jeenu Viswambharan authored
'dmb ld' is not a recognized instruction for ARMv7. Since generic code may use 'dmb ld', alias it to 'dmb' when building for ARMv7. Change-Id: I502f360cb6412897ca9580b725d9f79469a7612e Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Varun Wadekar authored
For Denver CPUs, this approach enables the mitigation during EL3 initialization, following every PE reset. No mechanism is provided to disable the mitigation at runtime. This approach permanently mitigates the EL3 software stack only. Other software components are responsible to enable it for their exception levels. TF-A implements this approach for the Denver CPUs with DENVER_MIDR_PN3 and earlier: * By setting bit 11 (Disable speculative store buffering) of `ACTLR_EL3` * By setting bit 9 (Disable speculative memory disambiguation) of `ACTLR_EL3` TF-A implements this approach for the Denver CPUs with DENVER_MIDR_PN4 and later: * By setting bit 18 (Disable speculative store buffering) of `ACTLR_EL3` * By setting bit 17 (Disable speculative memory disambiguation) of `ACTLR_EL3` Change-Id: If1de96605ce3f7b0aff5fab2c828e5aecb687555 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
Varun Wadekar authored
Denver CPUs expect the power state field to be reset to 'C1' during boot. This patch updates the reset handler to reset the ACTLR_.PMSTATE field to 'C1' state during CPU boot. Change-Id: I7cb629627a4dd1a30ec5cbb3a5e90055244fe30c Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-
- 04 Sep, 2018 4 commits
-
-
Jun Nie authored
Add response flag into ID definition so that driver does not need to handle it again. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
John Tsichritzis authored
This patch reduces BL2 size by 12kB. Thanks to the shared Mbed TLS heap between BL1 and BL2, BL2 now requires less memory since it doesn't need to allocate a heap anymore. Change-Id: I58a15f8c424273650c9f55112abe88105b6cdbae Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
John Tsichritzis authored
This patch introduces the shared Mbed TLS heap optimisation for Arm platforms. The objective is the Mbed TLS heap to be shared between BL1 and BL2 so as to not allocate the heap memory twice. To achieve that, the patch introduces all the necessary helpers for implementing this optimisation. It also applies it for FVP. Change-Id: I6d85eaa1361517b7490956b2ac50f5fa0d0bb008 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
John Tsichritzis authored
The Mbed TLS drivers, in order to work, need a heap for internal usage. This heap, instead of being directly referenced by the drivers, now it is being accessed indirectly through a pointer. Also, the heap, instead of being part of the drivers, now it is being received through the plat_get_mbedtls_heap() function. This function requests a heap from the current BL image which utilises the Mbed TLS drivers. Those changes create the opportunity for the Mbed TLS heap to be shared among different images, thus saving memory. A default heap implementation is provided but it can be overridden by a platform specific, optimised implemenetation. Change-Id: I286a1f10097a9cdcbcd312201eea576c18d157fa Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
- 03 Sep, 2018 3 commits
-
-
Christine Gharzuzi authored
- add svc configuration according to values burnt to the chip efuse Change-Id: Icf5d7cc41bc09ac2244d0a126106e681afebb064 Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
-
Marcin Wojtas authored
This patch enables handling PMU overflow IRQ by GIC SPI's directly in EL3. Also implement additional SMC routine, which can disable the solution on demand in runtime. Since it is possible to configure PMU interrupt trigger type in the MADT ACPI table, it is enough to set it only once in EL3 during initialization. Change-Id: Ie76aa62ccc4fd7cabfec9e3d5ed9970ada1c1b2a Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
-
Marcin Wojtas authored
This patch introduces new helper routines that allow configuring the individual IRQs to be edge/level-triggered via GICD_ICFGR registers. This is helpful to modify the default configuration of the non-secure GIC SPI's, which are all set during initialization to be level-sensitive. Change-Id: I23deb4a0381691a686a3cda52405aa1dfd5e56f2 Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
-
- 02 Sep, 2018 1 commit
-
-
Konstantin Porotchkin authored
Rename a8k_common.h to armada_common.h to keep the same header name across all other Marvell Armada platforms. This is especially useful since various Marvell platforms may use common platform files and share the driver modules. Change-Id: I7262105201123d54ccddef9aad4097518f1e38ef Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
-
- 30 Aug, 2018 12 commits
-
-
Antonio Nino Diaz authored
No functional changes. Change-Id: I850f08718abb69d5d58856b0e3de036266d8c2f4 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Jan Dabros authored
fixes arm-software/tf-issues#620 Signed-off-by: Jan Dabros <jsd@semihalf.com>
-
Antonio Nino Diaz authored
Change-Id: Ifdb0ceec19d267b14d796b5d31f08f7342190484 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I2954a99d5b72069bcb7bac9d6926c6209d6ba881 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I8fbb4c785e7e07c7241e0c399a9b65161985c9df Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I5993b425445ee794e6d2a792c244c0af53640655 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I130e35d55c474ecd80f9a825be23620d5bc1a715 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I6a2adef87c20f9279446a54b7e69618fba3d2a25 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I945029ca26ea2e63f0d92c5f33019b882f23bd72 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: Ib587f12f36810fc7d4f4b8f575195554299b8ed4 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
When any of these functions is called the backtrace will be printed to the console. Change-Id: Id60842df824b320c485a9323ed6b80600f4ebe35 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Douglas Raillard authored
This function diplays the backtrace, the current EL and security state to allow a post-processing tool to choose the right binary to interpret the dump. The output can be fed to GNU addr2line to resolve function names given an ELF binary compiled with debug information. The "-i" flag is recommended to improve display in case of inlined functions. The *.dump files generated during the build process can also be used. The function works in AArch64 and AArch32. In AArch32 it only works in A32 mode (without T32 interworking), which is enforced in the Makefile. Sample output of a backtrace at EL3: BACKTRACE: START: function_name 0: EL3: 0x798 1: EL3: 0x538 2: EL3: 0x550 3: EL3: 0x55c 4: EL3: 0x568 5: EL3: 0x5a8 6: EL3: 0xf4 BACKTRACE: END: function_name In order to enable it the new option ENABLE_BACKTRACE must be set to 1. This option is set to 1 by default only in AArch64 debug builds. As usual, it can be overridden by the platform makefile and in the build command line. Change-Id: Icaff39b0e5188329728be2f3c72b868b2368e794 Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
-
- 22 Aug, 2018 6 commits
-
-
Antonio Nino Diaz authored
Change their names to printf and snprintf. They are much smaller than the previous versions we had, which makes them better suited for the Trusted Firmware. Change-Id: Ia872af91b7b967c47fce012eccecede7873a3daf Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
The C standard says that printf() has to return the number of characters it has printed. Change-Id: I0ef50b1d6766d140724ac0a2fa2c5d023431f984 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
The codebase was using non-standard headers. It is needed to replace them by the correct ones so that we can use the new libc headers. Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Only leave the parts relevant to the Trusted Firmware. Change-Id: I0444c16e402f6c1629211d03bf6cb32ca3dbcf59 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Change-Id: I4f58bb4660078c9bc76d2826c90b2fa711719a3e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Antonio Nino Diaz authored
Taken from http://git.simple-cc.org/scc/ from the following commit: 67508ad14af314cea2229783d3c084f28c41daf0 Permission has been granted from the author to use them under the license BSD-3-Clause instead of ISC. Change-Id: I65c0ce3ab60c49d34a57533af12a74bd7bde88e5 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-