GitLab

unlike rk3399 and rk3368, there are some rockchip 64bit SOC
do not have CPUPD, and pmu_cpuson_entrypoint() is common
function for rockchip platform, so we need to check wakeup
cpu when resume.

Change-Id: I6313e8a9d7c16b03e033414f0cb281646c2159ff
Signed-off-by: Lin Huang <hl@rock-chips.com>

with PMU_PERILP_PD_EN bit enable, the soc will shutdown
cm0, crypto, dcf, imem(normal SRAM), dmac, bootrom, efuse_con,
spi, i2c, uart, saradc, tsadc when suspend, we have M0 code
need to run when suspend in normal SRAM, so we need to take
care of that.

Change-Id: I8c066637e5b81d4b1d53197450b9d592cbe00793
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

This moves the DRAM restore code to PMUSRAM. This is so that the
voltage domain that contains the SRAM that it was stored in before may
be turned off during system suspend.

Change-Id: Id761181a30caadd12f1ce061d1034f3159a76d28
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This converts two functions to use for-loops. This saves a bit of
space to help moving DRAM resume code to PMUSRAM.

Change-Id: Ie6ca490cf50c2ec83335cf1845b337c3e8a47496
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The removed if statement would make the same check that the for loop
it is in does to break out of the for loop, so it doesn't make any
sense to keep it there.

Change-Id: I819c29f9182e6de1fc47e418aed15ad38e8f9fa9
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This removes the mmio_... function calls to set the multicast bit for
the PHY registers when overriding the write leveling values. These are
not needed since multicast is set by default when calling the
function, and it's also better not to leave the side effect of
disabling multicast when exiting the function.

Change-Id: I83e089a2a2d55268b3832f36724c3b2c4be81082
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This removes the phy_dll_bypass_set function as it is unneeded. The
values that function sets are saved during suspend, so the proper
values will be restored on resume.

Change-Id: I17542206c56e639ce8cb6375233145167441d4e2
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This removes the space allocation for the unused PHY register space.
For instance in PHY registers 0-127, only 0-90 are used, so don't save
the 91-127 registers. This saves about 1.6KB of space.

Change-Id: I0c9f6d9bed8f0c1f3b8b805dfb10cf0c06208919
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

the function pmu_cpuon_entrypoint() need to run in the pmusram,
we just copy bin file to pmusram before, now we add pmusram section
and link pmu_cpuon_entrypoint() to pmusram directly

Change-Id: Iae31e4c01c480c8e6f565a8f588332b478efdb16
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

The differential signal of DQS need keep low level
before gate training. It need enable RPULL and disable
PHY side ODT to ensure it when do gate training.
But it can not access the PHY registers to do it when
perform DFS.So the workaroud as below: It is ensure that
the PHY's read gate is landing somewhere in the incoming
DQS's pulses before it starts searching for pre-amble window.
It need get the rddqs_delay_ps to calculate the start point
of gate training for DFS.

Change-Id: I79eabcf4ec9a9c8f4539f68a51f22afba49c72fe
Signed-off-by: Lin Huang <hl@rock-chips.com>

Update the path for firmware_image_package.h in firmware-design.md

Add support for RSASSAPSS algorithm

Add SCMI power domain and system power protocol support

Introduce ARM GIC-600 driver

Add support for Cortex-A75 and Cortex-A55 CPUs

FWU: Check for overlaps when loading images, introduce `FWU_SMC_IMAGE_RESET`

This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.

Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds the SCMI driver for communicating with SCP. The power
domain management and system power management protocol of the SCMI
specification[1] is implemented in the driver. The SCP power management
abstraction layer for SCMI for CSS power management is also added.

A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
driver over SCPI.

[1] ARM System Control and Management Interface v1.0 (SCMI)
Document number: ARM DEN 0056A

Change-Id: I67265615a17e679a2afe810b9b0043711ba09dbb
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch modifies the `cert_create` tool to use RSASSA-PSS scheme for
signing the certificates. This is compliant with RSA PKCS_2_1 standard as
mandated by TBBR.

Note that the certificates generated by using cert_create tool after this
patch can be authenticated during TBB only if the corresponding mbedtls
driver in ARM Trusted Firmware has the corresponding support.

Change-Id: If224f41c76b3c4765ae2af5259e67f73602818a4
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds support for RSASSA-PSS Signature Algorithm for
X509 certificates in mbedtls crypto driver. Now the driver supports
RSA PKCS2_1 standard as mandated by TBBR.

NOTE: With this patch, the PKCS1_5 standard compliant RSA signature
is deprecated.

Change-Id: I9cf6d073370b710cc36a7b374a55ec96c0496461
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

The mbedTLS library requires larger heap memory for verification of RSASSA-PSS
signature in certificates during Trusted Board Boot. This patch increases the
heap memory for the same.

Change-Id: I3c3123d7142b7b7b01463516ec436734895da159
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: Ic0a9b3c6d212e7171b37f944e11f079282dcce87
Signed-off-by: Summer Qin <summer.qin@arm.com>

This SMC is as a means for the image loading state machine to go from
COPYING, COPIED or AUTHENTICATED states to RESET state. Previously, this
was only done when the authentication of an image failed or when the
execution of the image finished.

Documentation updated.

Change-Id: Ida6d4c65017f83ae5e27465ec36f54499c6534d9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Added checks to FWU_SMC_IMAGE_COPY to prevent loading data into a
memory region where another image data is already loaded.

Without this check, if two images are configured to be loaded in
overlapping memory regions, one of them can be loaded and
authenticated and the copy function is still able to load data from
the second image on top of the first one. Since the first image is
still in authenticated state, it can be executed, which could lead to
the execution of unauthenticated arbitrary code of the second image.

Firmware update documentation updated.

Change-Id: Ib6871e569794c8e610a5ea59fe162ff5dcec526c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

It doesn't make sense to use the `-pedantic` flag when building the
Trusted Firmware as we use GNU extensions and so our code is not
fully ISO C compliant. This flag only makes sense if the code intends to
be ISO C compliant.

Change-Id: I6273564112759ff57f03b273f5349733a5f38aef
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
implements a power control register in the Redistributor frame. This
register must be programmed to mark the frame as powered on, before
accessing other registers in the frame. Rest of initialization sequence
remains the same.

The driver provides APIs for Redistributor power management, and
overrides those in the generic GICv3 driver. The driver data is shared
between generic GICv3 driver and that of GIC-600.

For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
is set to FVP_GIC600. Also update user guide.

Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.

Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Finish hikey psci

mbedtls: Define optimized mbed TLS heap size

mbed TLS provides the debug API `mbedtls_memory_buffer_alloc_status()`
to analyse the RAM usage of the library.

When RSA is selected as algorithm, the maximum heap usage in FVP and
Juno has been determined empirically to be approximately 5.5 KiB.
However, The default heap size used when RSA is selected is 8 KiB.

This patch reduces the buffer from 8 KiB to 6 KiB so that the BSS
sections of both BL1 and BL2 are 2 KiB smaller when the firmware is
compiled with TBB support.

Change-Id: I43878a4e7af50c97be9c8d027c728c8483f24fbf
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add ufs stack and designware phy

hikey: fix uninitialized variable in ddr code

This patch is to enable CPU suspend/resume and system level's
suspend/resume; also enable system power off state.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

The cluster 0 doesn't rely on PSCI to enable it; so enable CCI port
for cluster 0 in BL31 platform setup flow.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Fix for CPU topology so present the CPU core numbers for two clusters;
Base on this fixing, the PSCI can maintain correct power states.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Fix uninitliazed variable in ddr driver code.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Initialized the designware UFS PHY.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

If UFS device is initialized, we could just make it out of
hibernation by UFS_FLAGS_SKIPINIT. And vendor's dirver is always
focus on PHY setting. We could use UFS driver directly if it
exits from hibernation.

There're eight LUNs in UFS device. The UFS driver only provides
the read/write API with LUN. User could define his own read/write
since user may want to access different LUNs.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Reduce code size when building with Trusted Board Boot enabled

HiKey v3