GitLab

Remove pll powerdown from pll configuration sequence to improve
stability. Remove redundant cases, which no longer exist.
Also get rid of irrelevant definition of CPU_2200_DDR_1200_RCLK_1200,
which is not used by 806/807.

Change-Id: If911e7dee003dfb9a42fafd7ffe34662f026fd23
Signed-off-by: Alex Leibovich <alexl@marvell.com>

This commit introduces 32-bit DDR topology map initialization.
For that purpose a new DDR32 build flag is added, with
according documentation update.

Change-Id: I169ff358c2923afd984e27bc126dc551dcaefc01
Signed-off-by: Alex Leibovich <alexl@marvell.com>

This commit introduces two changes:
- remove hardcoded references to mci0 from the driver
- perform mci optimization for all mci interfaces

It fixes performance issues observed on cn9132 CP2.

Change-Id: I4e040cd54ff95c9134035ac89b87d8feb28e9eba
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The mci_initialize function name was misleading. The function itself
doesn't initialize MCI in general but performs MCI link tuning for
performance improvement.

Change-Id: I13094ad2235182a14984035bbe58013ebde84a7e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: Id702c070c433f8439faad115830e71b2873ab70a
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Snoop filter needs to be enabled once per cluster.

Change-Id: I241e72f21982142ba290c7547df6f434e6a6a98d
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

By default all external CPs start with configuration address space set to
0xf200_0000. To overcome this issue, go in the loop and initialize the
CP one by one, using temporary window configuration which allows to access
each CP and update its configuration space according to decoding
windows scheme defined for each platform.

In case of cn9130 after this procedure bellow addresses will be used:
CP0 - f2000000
CP1 - f4000000
CP2 - f6000000

When the re-configuration is done there is need to restore previous
decoding window configuration(init_io_win).

Change-Id: I1a652bfbd0bf7106930a7a4e949094dc9078a981
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The AP807 uses different register offset for MCIx4 register, reflect it
in the code.

Change-Id: Ic7e44fede3c69083e8629741e7c440b1ae08c35f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: Icb8fe14417665d6aadd5a5ee2b77547b4ef78773
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionality from a8k,
allow to use a8k_common.mk and mss_common.mk from outside of
PLAT_FAMILY_BASE.
Above is done by introducing BOARD_DIR which needs to be set by each
platform, before including a8k_common.mk and mss_common.mk. This will
allow to use mentioned mk files not only for platforms located under
previously defined PLAT_FAMILY_BASE.

Change-Id: I22356c99bc0419a40ae11e42f37acd50943ea134
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.

Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Current value is 16, count the MAP_REGION calls gets us at least 17,
so increase the max value to 20 to have a bit of a margin.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I93d0324f3d483758366e758f8f663545d365e03f

Fix etzpc node location in stm32mp157c DTSI file as requested during the
patch review. The comment was addressed then fixup change discarded while
rebasing.

Change-Id: Ie53531fec7da224de0b86c968a66aec441bfc25d
Fixes: 627298d4

 ("dts: stm32mp157c: add etzpc node")
Reported-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

64KB was not enouth to handle fdt, bl2 shows
following error message.

"ERROR:   Invalid Device Tree at 0x10000000000: error -3"

This patch increases the size to 1MB to address above error.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I0726a0cea95087175451da0dba7410acd27df808

* changes:
  plat/stm32mp1: sp_min relies on etzpc driver
  dts: stm32mp157c: add etzpc node
  drivers: introduce ST ETZPC driver

* changes:
  Enable ARMv8.6-ECV Self-Synch when booting to EL2
  Enable ARMv8.6-FGT when booting to EL2

Use ETZPC driver to configure secure aware interfaces to assign
them to non-secure world. Sp_min also configures BootROM resources
and SYSRAM to assign both to secure world only.

Define stm32mp15 SoC identifiers for the platform specific DECPROT
instances.

Change-Id: I3bec9f47b04bcba3929e4df886ddb1d5ff843089
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Add a node for the ETZPC device so that driver initializes during
stm32mp15* boot sequence.

Change-Id: I84bf10572e5df7b8f450163c79bcfe6956fc838f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

ETZPC stands for Extended TrustZone Protection Controller. It is a
resource conditional access device. It is mainly based on Arm TZPC.

ST ETZPC exposes memory mapped DECPROT cells to set access permissions
to SoC peripheral interfaces as I2C, SPI, DDR controllers, and some
of the SoC internal memories.

ST ETZPC exposes memory mapped TZMA cells to set access permissions
to some SoC internal memories.

Change-Id: I47ce20ffcfb55306dab923153b71e1bcbe2a5570
Co-developed-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

This patch enables the stream ID for the SD/MMC
controllers via dedicated unit register. Thanks to this
change it is possible to configure properly the
IOMMU in OS and use the SD/MMC interface in a guest
Virtual Machine.

Change-Id: I99cbd2c9882eb558ba01405d3d8a3e969f06e082
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>

BL31_CACHE_DISABLE flag was introduced as a work-around
for the older SoC revisions. Since it is not relevant in the
newest versions, toggle it to be disabled by default.
One can still specify it by adding 'BL31_CACHE_DISABLE=1'
string to the build command.

Change-Id: I11b52dade3ff7f8ee643b8078c6e447c45946570
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Enhanced Counter Virtualization, ECV, is an architecture extension introduced
in ARMv8.6. This extension allows the hypervisor, at EL2, to setup
self-synchronizing views of the timers for it's EL1 Guests. This patch pokes the
control register to enable this extension when booting a hypervisor at EL2.

Change-Id: I4e929ecdf400cea17eff1de5cf8704aa7e40973d
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

The Fine Grained Traps (FGT) architecture extension was added to aarch64 in
ARMv8.6. This extension primarily allows hypervisors, at EL2, to trap specific
instructions in a more fine grained manner, with an enable bit for each
instruction. This patch adds support for this extension by enabling the
extension when booting an hypervisor at EL2.

Change-Id: Idb9013ed118b6a1b7b76287237096de992ca4da3
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Core spm_mm code expects the translation tables are located in the
inner & outer WBWA & shareable memory.
REGISTER_XLAT_CONTEXT2 macro is used to specify the translation
table section in spm_mm.

In the commit 363830df

 (xlat_tables_v2: merge
REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}), REGISTER_XLAT_CONTEXT2
macro explicitly specifies the base xlat table goes into .bss by default.
This change affects the existing SynQuacer spm_mm implementation.
plat/socionext/synquacer/include/plat.ld.S linker script intends to
locate ".bss.sp_base_xlat_table" into "sp_xlat_table" section,
but this implementation is no longer available.

This patch adds the base table section name parameter for
REGISTER_XLAT_CONTEXT2 so that platform can specify the
inner & outer WBWA & shareable memory for spm_mm base xlat table.
If PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME is not defined, base xlat table
goes into .bss by default, the result is same as before.

Change-Id: Ie0e1a235e5bd4288dc376f582d6c44c5df6d31b2
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Change-Id: I89b90cbdfc8f2aa898b4f3676a4764f060f8e138
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

This should allow git to easily track file moves
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: I1592cf39a4f94209c560dc6d1a8bc1bfb21d8327

This allows to build for k3-based boards that use a different UART as
console, such as the IOT2050 which requires K3_USART=1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I7171f86c3cabae2c575b8fbeecef839b48bd109b

Changes stm32mp1 reset driver to API to add a timeout argument
to stm32mp_reset_assert() and stm32mp_reset_deassert() and
a return value.

With a supplied timeout, the functions wait the target reset state
is reached before returning. With a timeout of zero, the functions
simply load target reset state in SoC interface and return without
waiting.

Helper functions stm32mp_reset_set() and stm32mp_reset_release()
use a zero timeout and return without a return code.

This change updates few stm32 drivers and plat/stm32mp1 blé_plat_setup.c
accordingly without any functional change.
functional change.

Change-Id: Ia1a73a15125d3055fd8739c125b70bcb9562c27f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>