GitLab

This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.

When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b

plat: marvell: armada: a3k: Add checks that WTP, MV_DDR_PATH and CRYPTOPP_PATH are correctly defined

These variables must contain a path to a valid directory (not a file) which
really exists. Also WTP and MV_DDR_PATH must point to either a valid Marvell
release tarball or git repository.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1ad80c41092cf3ea6a625426df62b7d9d6f37815

The base address of UART peripheral should be given in R0, not in R1.
Otherwise the console_stm32_core_flush issues an assert message.
This issue was highlighted with recent changes in console flush functions.

Change-Id: Iead01986fdbbf30ad2fd9fa515a1d2b611b4e591
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Violation of MISRA-C Rule 14.4
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I44ef50dadb54fb056a91f3de962b6e63ba6d7ac4

The issue is that, when interrupt is triggered and RAS handler
is entered, after interrupt handler finishes, TF-A will re-enter
bl32 and then crash.
sdei_dispatch_event() may return failing result in some cases,
for example kernel may not have registered a handler or RAS event
may happen early during boot. We restore the NS context when
sdei_dispatch_event() returns failing result.

error log :
Received delegated event
X0 :  0xC4000061
X1 :  0x0
X2 :  0x0
X3 :  0x0
Received event - 0xC4000061 on cpu 0
UnRecognized Event - 0xC4000061
Failed delegated event 0xC4000061, Status Invalid Parameter
Unhandled Exception in EL3.
x30            = 0x000000000401f700
x0             = 0xfffffffffffffffe
x1             = 0xfffffffffffffffe
x2             = 0x00000000600003c0
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I9802e9a32eee0ac3b5a8bcc0362d0b0e3b71dc9f

Turn ON/OFF GIC redistributor in sync with GIC CPU interface ON/OFF.

Issue :
The Linux prompt hangs when all the cores in a cluster are turned OFF
and we try to turn ON a core in that cluster. Previously when TF-A turns
ON a core, TF-A first turns ON the redistributor followed by the core.
This did not match the flow when turning OFF a core, as TF-A did not
turn OFF redistributor when the corresponding core[s] are disabled.
This hang is resolved by disabling redistributor as cores are disabled,
keeping them in sync.
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Change-Id: Ifd04fdcfd47b45e00f874f15b098471883d023f0

Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c

This allows PSCI in TF-A to signal platform power states to QEMU
via a controller in secure space.

This required a sbsa-ref specific version of PSCI functions for the
platform. Also adjusted the MMU range to also include the new EC.

Add a new MMU region for the embedded controller and increase the
size of xlat tables by one for the new region.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Iece8a88947f11e82ab8988e460a8a66ad175a5ee

sbsa-ref in QEMU creates clusers of 8 cores, it may create up to 512
cores in upto 64 clusters. Implement a qemu_sbsa specific topology file
and increase the BL31_SIZE to accommodate the bigger table sizes. Change
platform_def.h for new topology. Correct PLATFORM_CPU_PER_CLUSTER_SHIFT so
plat_helpers.S calculates correct result.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Idc5d70394c0956b759ad2c86f9fda8f293f2cfa7

DEVICE2 is not currently used on qemu platform but is needed for
a future patch for qemu_sbsa platform. Change its definition to
RW and add it to all levels of arm-tf similar to DEVICE1 definition.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I03495471bfd423b61ad44ec4953fb25f76aa54bf

Rather than re-create this file in multiple qemu variants instead
caclulate the shift needed to convert MPIDR to position.

Add a new PLATFORM_CPU_PER_CLUSTER_SHIFT define in platform_def.h
for both qemu and qemu_sbsa to enable this calculation.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I0e3a86354aa716d95150a3a34b15287cd70c8fd2

Add DT node support for channel 0 where physical memory is split
between 32bit space and 64bit space.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I99a18dbb14cdb54100a836c16445242e430794e3

The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I3ed55aa4a2cc5c9d9cd6440e087bcd93186520c7

Include header ulcb_cpld.h in plat_pm.c only if RCAR_GEN3_ULCB
is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ie89223097c608265c50e32778e8df28feed82480

Move rcar plat code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I1001bea1a8a9232a03ddbf6931ca3c764ba1e181

Move plat aarch64 code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I66265e5e68bfcf5c3534965fb3549a145c782b47

Move DDR/QoS/PFC header files, so that the same code
can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I2cc0ceda8d05b6b8d95a69afdc233dc0d098e850

Move rpc driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I04805d720d95b8edcc14e652f897fadc7f432197

Move avs driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I85d9fa8b6abf158ce2521f1696478f7c5339fc42

Move authentication driver code to common directory, so that the
same code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I02592dfc714998bf89b9feaa78f685ae36be6f59

Move dma driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Idce2e2f4e098cfc17219f963373d20ebf74e5b7c

Move watch driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I235f2cde325a0feeadbfc4b7ee02e8b1186f7ea1

Move plat common sources to common directory, so that same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Id2b1822c97cc50e3febaffc2e5f42b4d53809a17

Move rom driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I399dfb5eff186db76d26fa9c54bea88bee66789c

Create a common directory and move the header and assembly files
so that the common code can be used by both Renesas R-Car Gen3 and
RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ia9a563a1c3c9f8c6f0d3cb82622deb2e155d7f6c

Move delay driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I5e806bd0e0a0a4b436048513b7089db90ff9805f

This patch fixes checkpatch warnings and replaces TAB with
space after #define macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I11f65d494997cbf612376fb120c27ef0166cdd3a

Move console/scif driver code to common directory, so that the
same code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I0b15e4f4ffaaa99e77bcee32b1dad648eeadcd9b

Fix checkpatch warnings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: If9318a5113fbd6ae8b5c4bfb409da9e393673258

Move pwrc driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I75d91a44d872fe2296b15c700efacd5721385363

Fix checkpatch warnings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I46801b563c887dc0a66e224ab4971e6503641529

Move io driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ic661e415c91a1fbfd5eee3bba86466037e51574b

Sort the header includes alphabetically, fix typos and drop unneeded TAB
and replace it with space
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ieff84434877f58ec26c8351611059ad4e11a4e28

Move eMMC driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I7f3055709337327d1a1c9f563c14ad1626adb355

Sort the header includes alphabetically and fix checkpatch warnings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I08fd0d12ee1d8d61391e8afc33f8c67fcf70c4e5

This implements support for UEFI secure variable storage
using standalone MM framework on qemu_sbsa platform.

Non-secure shared memory between UEFI and standalone MM
is allocated at the top of DRAM.
DRAM size of qemu_sbsa varies depends on the QEMU parameter,
so the non-secure shared memory is allocated by trusted firmware
and passed the base address and size to UEFI through device tree
"/reserved-memory" node.

Change-Id: I367191f408eb9850b7ec7761ee346b014c539767
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Add ability to support PS and System reset after idling the APU,
by reading the restart scope from the PMU.
Signed-off-by: Will Wong <willw@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I23c01725d8ebb71ad34be02ab204411b93620702

ATF is not checking PM version. Add version check in such
a way that it is compatible with current and newer version
of PM.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ia095d118121e6f75e8d320e87d5e2018068fa079

The current configuration of CPU windows on Armada 37x0 with 4 GB DRAM
can only utilize 3.375 GB of memory. This is because there are only 5
configuration windows, configured as such (in hexadecimal, also showing
ranges not configurable by CPU windows):

         0 - 80000000 |   2 GB | DDR  | CPU window 0
  80000000 - C0000000 |   1 GB | DDR  | CPU window 1
  C0000000 - D0000000 | 256 MB | DDR  | CPU window 2
  D0000000 - D2000000 |  32 MB |      | Internal regs
      empty space     |        |      |
  D8000000 - D8010000 |  64 KB |      | CCI regs
      empty space     |        |      |
  E0000000 - E8000000 | 128 MB | DDR  | CPU window 3
  E8000000 - F0000000 | 128 MB | PCIe | CPU window 4
      empty space     |        |      |
  FFF00000 - end      |  64 KB |      | Boot ROM

This can be improved by taking into account that:
- CCI window can be moved (the base address is only hardcoded in TF-A;
  U-Boot and Linux will not break with changing of this address)
- PCIe window can be moved (upstream U-Boot can change device-tree
  ranges of PCIe if PCIe window is moved)

Change the layout after the Internal regs as such:

  D2000000 - F2000000 | 512 MB | DDR  | CPU window 3
  F2000000 - FA000000 | 128 MB | PCIe | CPU window 4
      empty space     |        |      |
  FE000000 - FE010000 |  64 KB |      | CCI regs
      empty space     |        |      |
  FFF00000 - end      |  64 KB |      | Boot ROM

(Note that CCI regs base address is moved from D8000000 to FE000000 in
 all cases, not only for the configuration with 4 GB of DRAM. This is
 because TF-A is built with this address as a constant, so we cannot
 change this address at runtime only on some boards.)

This yields 3.75 GB of usable RAM.

Moreover U-Boot can theoretically reconfigure the PCIe window to DDR if
it discovers that no PCIe card is connected. This can add another 128 MB
of DRAM (resulting only in 128 MB of DRAM not being used).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I4ca1999f852f90055fac8b2c4f7e80275a13ad7e

Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with 'rdv1mc' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I5d91c69738397b19ced43949b4080c74678e604c