GitLab

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.

For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.

Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

EHF and RAS documentation

romlib: Add juno support for romlib

romlib: Allow patching of romlib functions

Change-Id: Ibf2b21b12ebc0af5815fc6643532a3be9100bf02
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Change-Id: I77d38758d18ba6dda1652b1b1e644fbfb14386cc
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Secure world execution nearly always expect a controlled exit to
Non-secure world. SDEI interrupts, although targets EL3, occur on behalf
of Non-secure world, and may have higher priority than Secure world
interrupts. Therefore they might preempt Secure execution, and yield
execution to Non-secure SDEI handler. Upon completion of SDEI event
handling (regardless of whether it's COPLETE or COMPLETE_AND_RESUME), we
must resume Secure execution if it was preempted.

Change-Id: I6edd991032588588427ba2fe6c3d7668f7080e3d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Synchronise arch.h and arch_helpers.h with TF-A-Tests

The headers forked at some point in the past and have diverged a lot. In
order to make it easier to share code between TF-A-Tests and TF-A, this
patch synchronises most of the definitions in the mentioned headers.

This is not a complete sync, it has to be followed by more cleanup.

This patch also removes the read helpers for the AArch32 instructions
ats1cpr and ats1hr (they are write-only).

Change-Id: Id13ecd7aeb83bd2318cd47156d71a42f1c9f6ba2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds support to build a combined BL1
and ROMLIB binary file with the right page
alignment in Juno. When USE_ROMLIB=1 is set for
Juno, it generates the combined file
bl1_romlib.bin which needs to be used instead of
bl1.bin

Change-Id: I407efbe48d3e522fa6ef855538a9587193cb1919
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

allwinner: clock / power fixes

Add support for dmc620 tzc driver

Change-Id: I1f377d2d94c0fe8d2d9e62614f4a8e2dfcd9e745
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

Register functions have to be added to the
jump table to allow patching in the
future

Change-Id: I57a885f7fc6290ea74a6096aea5b1867b2098eb7
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

This change allows patching of functions in the
romlib. This can be done by adding "patch" at the
end of the jump table entry for the function that
needs to be patched in the file jmptbl.i.
Functions patched in the jump table list will be
built as part of the BL image and the romlib
version will not be used

Change-Id: Iefb200cb86e2a4b61ad3ee6180d3ecc39bad537f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

This reverts commit 6f512a3d

.

According to the 'Cortex-A57 MPCore Software Developers Errata Notice':

    This bug will only affect secure AArch64 EL3. If the above
    conditions occur, the CPU will not invalidate the targeted EL3 TLB
    entries and incorrect translations might occur.

For this reason it is not needed in AArch32.

Change-Id: I6f7b333817515499723e8f306145790ad6af9975
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Support mapping regions with allocated VA

rcar-gen3: lock RPC hyper-flash access

Provide new APIs to add new regions without specifying the base VA.

- `mmap_add_region_alloc_va` adds a static region to mmap choosing as
  base VA the first possible address after all the currently mapped
  regions. It is aligned to an appropriate boundary in relation to the
  size and base PA of the requested region. No attempt is made to fill
  any unused VA holes.

- `mmap_add_dynamic_region_alloc_va` it adds a region the same way as
  `mmap_add_region_alloc_va` does, but it's dynamic instead of static.

- `mmap_add_alloc_va` takes an array of non const `mmap_region_t`,
  maps them in the same way as `mmap_add_region_alloc_va` and fills
  their `base_va` field. A helper macro has been created to help create
  the array, called `MAP_REGION_ALLOC_VA`.

Change-Id: I5ef3f82ca0dfd0013d2e8034aa22f13ca528ba37
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove the platform common plat_arm_security_setup function to allow
platform specific implementations of the security setup function
implemented in the board directory of the platform.

For use by secure software, configure region0 of DMC-620 trustzone
controller to protect the upper 16MB of memory of the first DRAM block
from non-secure accesses.

Change-Id: I9a8c19656702c4fa4f6917b3655b692d443bb568
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

ARM CoreLink DMC-620 Dynamic Memory Controller includes a TZC controller
to setup secure or non-secure regions of DRAM memory. The TZC controller
allows to setup upto eight such regions of memory in DRAM. This driver
provides helper functions to setup the TZC controller within DMC-620.

Change-Id: Iee7692417c2080052bdb7b1c2873a024bc5d1d10
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

rpi3: fix bad formatting in rpi3.rst

d4fd0219 (pull request #1685) introduced unwanted formatting
such as bold/italic in the description for RPI3_USE_UEFI_MAP.

backtrace: Extract rules from root Makefile

rpi3: add RPI3_USE_UEFI_MAP build option

RCAR_RPC_HYPERFLASH_LOCKED can be set to 0 as a build option if the
user needs to allow u-boot to reprogram the ATF firmware using a FIP
image (as a faster alternative of toggling numerous DIP switches on
the board and using ascii-xfer of srec files)

The code being controlled with this commit should only be re-enabled for
debugging (_never_ on a product release)
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>

hikey: increase delay after eMMC initialized

Marvell: Migrate to multi console API

It's better to have them in a separate file instead of having them spread
across the Makefile. This is what the stack protector is already doing.

Change-Id: Id30742c0af10de5ea6d10674ca25bf52b0f2b262
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The default Raspberry Pi 3 memory mapping for ATF is geared towards
the use of uboot + Linux. This creates issues when trying to use
ATF with an UEFI payload and Windows on ARM64.

We therefore introduce new build option RPI3_USE_UEFI_MAP, that
enables the build process to use an alternate memory mapping that
is compatible with UEFI + Windows (as well as UEFI + Linux).

Fixes ARM-software/tf-issues#649
Signed-off-by: Pete Batard <pete@akeo.ie>

Add multi console support for STM32MP1

rpi3: add RPI3_RUNTIME_UART build option

Some eMMC chips require a longer delay. After testing
different chips, 20ms appears to work reliably.
Signed-off-by: Ryan Grachek <ryan@edited.us>

Migrate Marvell platforms from legacy console API to
multi-console API.

Change-Id: I647f5f49148b463a257a747af05b5f0c967f267c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Now that MULTI_CONSOLE_API is enabled for the STM32MP1 platform,
we can remove the non MULTI_CONSOLE_API parts in the driver.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Signed-off-by: Yann Gautier <yann.gautier@st.com>

Signed-off-by: Yann Gautier <yann.gautier@st.com>

Signed-off-by: Yann Gautier <yann.gautier@st.com>

When compiling assembly files, stdint.h is not included.
UINT32_C and UINT64_C are then not defined.
A new GENMASK macro for assembly is then created.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

SPM priority level changes