GitLab

Extract Timer clock frequency from the timer node in
HW_CONFIG dtb. The first timer is a per-core architected timer attached
to a GIC to deliver its per-processor interrupts via PPIs.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I2f4b27c48e4c79208dab9f03c768d9221ba6ca86

* changes:
  Workaround for Cortex A76 erratum 1800710
  Workaround for Cortex A76 erratum 1791580

Change handler of FFA version interface:
- Return SPMD's version if the origin of the call is secure;
- Return SPMC's version if origin is non-secure.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I0d1554da79b72b1e02da6cc363a2288119c32f44

Cortex A76 erratum 1800710 is a Cat B erratum, present in older
revisions of the Cortex A76 processor core.  The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.

This errata is explained in this SDEN:
https://static.docs.arm.com/sden885749/g/Arm_Cortex_A76_MP052_Software_Developer_Errata_Notice_v20.pdf

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifc34f2e9e053dcee6a108cfb7df7ff7f497c9493

Cortex A76 erratum 1791580 is a Cat B erratum present in earlier
revisions of the Cortex A76. The workaround is to set a bit in the
implementation defined CPUACTLR2 register, which forces atomic store
operations to write-back memory to be performed in the L1 data cache.

This errata is explained in this SDEN:
https://static.docs.arm.com/sden885749/g/Arm_Cortex_A76_MP052_Software_Developer_Errata_Notice_v20.pdf

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iefd58159b3f2e2286138993317b98e57dc361925

* changes:
  Tegra: sanity check NS address and size before use
  Tegra: memctrl_v2: fixup sequence to resize video memory

* changes:
  drivers/scmi-msg: smt entry points for incoming messages
  drivers/scmi-msg: support for reset domain protocol
  drivers/scmi-msg: support for clock protocol
  drivers/scmi-msg: driver for processing scmi messages

It is desired to have the peripheral writes completed to clear the
interrupt condition and de-assert the interrupt request to GIC before
EOI write. Failing which spurious interrupt will occurred.

A barrier is needed to ensure peripheral register write transfers are
complete before EOI is done.

GICv2 memory mapped DEVICE nGnR(n)E writes are ordered from core point
of view. However these writes may pass over different interconnects,
bridges, buffers leaving some rare chances for the actual write to
complete out of order.

GICv3 ICC EOI system register writes have no ordering against nGnR(n)E
memory writes as they are over different interfaces.

Hence a dsb can ensure from core no writes are issued before the previous
writes are *complete*.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: Ie6362009e2f91955be99dca8ece14ade7b4811d6

Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: Iaf6deaeee2069720518221157edbb052bc42850a

This patch updates the 'bl31_check_ns_address()' helper function to
check that the memory address and size passed by the NS world are not
zero.

The helper fucntion also returns the error code as soon as it detects
inconsistencies, to avoid multiple error paths from kicking in for the
same input parameters.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Change-Id: I46264f913954614bedcbde12e47ea0c70cd19be0

This patch adds BRANCH_PROTECTION = 4 'bti' build option
which turns on branch target identification mechanism.

Change-Id: I32464a6b51726a100519f449a95aea5331f0e82d
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch provides the platform level support to enable GICv3
drivers on future Tegra platforms.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I966a4502b2a4a7bd1ce66da843997c9ed605c59f

The previous sequence used by the driver to program the new memory
aperture settings and clear the non-overlapping memory was faulty.
The sequence locked the non-overlapping regions twice, leading to
faults when trying to clear it.

This patch modifies the sequence to follow these steps:

* move the previous memory region to a new firewall register
* program the new memory aperture settings
* clean the non-overlapping memory

This patch also maps the non-overlapping memory as Device memory to
follow guidance from the arch. team.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I7cf6e05b2dd372103dc7229e37b1b3fc269a57ae

* changes:
  ddr: a80x0: add DDR 32-bit ECC mode support
  ble: ap807: improve PLL configuration sequence
  ble: ap807: clean-up PLL configuration sequence
  ddr: a80x0: add DDR 32-bit mode support
  plat: marvell: mci: perform mci link tuning for all mci interfaces
  plat: marvell: mci: use more meaningful name for mci link tuning
  plat: marvell: a8k: remove wrong or unnecessary comments
  plat: marvell: ap807: enable snoop filter for ap807
  plat: marvell: ap807: update configuration space of each CP
  plat: marvell: ap807: use correct address for MCIx4 register
  plat: marvell: add support for PLL 2.2GHz mode
  plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic
  marvell: armada: add extra level in marvell platform hierarchy

This change implements SCMI channels for reading a SCMI message from a
shared memory and call the SCMI message drivers to route the message
to the target platform services.

SMT refers to the shared memory management protocol which is used
to get/put message/response in shared memory. SMT is a 28byte header
stating shared memory state and exchanged protocol data.

The processing entry for a SCMI message can be a secure interrupt
or fastcall SMCCC invocation.

SMT description in this implementation is based on the OP-TEE
project [1] itself based in the SCP-firmware implementation [2].

Link: [1] https://github.com/OP-TEE/optee_os/commit/a58c4d706d2333d2b21a3eba7e2ec0cb257bca1d
Link: [2] https://github.com/ARM-software/SCP-firmware.git



Change-Id: I416c7dab5c67954c6fe80bae8d8cdfdcda66873e
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Adds SCMI reset domain protocol support in the SCMI message drivers
as defined in SCMI specification v2.0 [1]. Not all the messages
defined in the specification are supported.

scmi_msg_get_rd_handler() sanitizes the message_id value
against any speculative use of reset domain ID as a index since by
SCMI specification, IDs are indices.

This implementation is based on the OP-TEE project implementation [2]
itself based on the SCP-firmware implementation [3] of the SCMI
protocol server side.

Link: [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/DEN0056A_System_Control_and_Management_Interface.pdf
Link: [2] https://github.com/OP-TEE/optee_os/commit/56a1f10ed99d683ee3a8af29b6147a59a99ef3e0
Link: [3] https://github.com/ARM-software/SCP-firmware.git



Change-Id: If7cf13de40a815dedb40dcd5af8b6bb6725d9078
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Adds SCMI clock protocol support in the SCMI message drivers as
defined in SCMI specification v2.0 [1] for clock protocol messages.

Platform can provide one of the plat_scmi_clock_*() handler for the
supported operations set/get state/rate and others.

scmi_msg_get_clock_handler() sanitizes the message_id value
against any speculative use of clock ID as a index since by
SCMI specification, IDs are indices.

This implementation is based on the OP-TEE project implementation [2]
itself based on the SCP-firmware implementation [3] of the SCMI
protocol server side.

Link: [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/DEN0056A_System_Control_and_Management_Interface.pdf
Link: [2] https://github.com/OP-TEE/optee_os/commit/a7a9e3ba71dd908aafdc4c5ed9b29b15faa9692d
Link: [3] https://github.com/ARM-software/SCP-firmware.git



Change-Id: Ib56e096512042d4f7b9563d1e4181554eb8ed02c
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

This change introduces drivers to allow a platform to create a basic
SCMI service and register handlers for client request (SCMI agent) on
system resources. This is the first piece of the drivers: an entry
function, the SCMI base protocol support and helpers for create
the response message.

With this change, scmi_process_message() is the entry function to
process an incoming SCMI message. The function expect the message
is already copied from shared memory into secure memory. The message
structure stores message reference and output buffer reference where
response message shall be stored.

scmi_process_message() calls the SCMI protocol driver according to
the protocol ID in the message. The SCMI protocol driver will call
defined platform handlers according to the message content.

This change introduces only the SCMI base protocol as defined in
SCMI specification v2.0 [1]. Not all the messages defined
in the specification are supported.

The SCMI message implementation is derived from the OP-TEE project [2]
itself based on the SCP-firmware implementation [3] of the SCMI protocol
server side.

Link: [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/DEN0056A_System_Control_and_Management_Interface.pdf
Link: [2] https://github.com/OP-TEE/optee_os/commit/ae8c8068098d291e6e55744dbc237ec39fd9840a
Link: [3] https://github.com/ARM-software/SCP-firmware/tree/v2.6.0



Change-Id: I639c4154a39fca60606264baf8d32452641f45e9
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Load address of tb_fw_config is incorrectly mentioned
in below device trees:
1. rdn1edge_fw_config.dts
2. tc0_fw_config.dts

Till now, tb_fw_config load-address is not being retrieved from
device tree and hence never exeprienced any issue for tc0 and
rdn1edge platform.

For tc0 and rdn1edge platform, Load-address of tb_fw_config should
be the SRAM base address + 0x300 (size of fw_config device tree)
Hence updated these platform's fw_config.dts accordingly to reflect
this load address change.

Change-Id: I2ef8b05d49be10767db31384329f516df11ca817
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

* changes:
  Tegra194: ras: verbose prints for SErrors
  Prevent RAS register access from lower ELs
  Tegra194: SiP: clear RAS corrected error records
  Tegra194: add RAS exception handling

* changes:
  tbbr: add chain of trust for Secure Partitions
  cert_create: extend Secure partition support for tbbr CoT

Change-Id: I3726f42f8f3de0cd88bd77a0f9d92a710649d18c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

with sha 44f1aa8e

, support for Silicon Provider(SiP) owned Secure
Partition(SP) was added for dualroot CoT. This patch extends this
support for tbbr CoT.

Earlier tbbr CoT for SPs was left to avoid adding new image types in
TBBR which could possibly be seen as deviation from specification.
But with further discussions it is understood that TBBR being a
*minimal* set of requirements that can be extended as long as we don't
violate any of the musts, which is the case with adding SP support.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1b9e3ebdd7d653f1fd4cc3bd910a69871b55ecbb

This patch provides verbose prints for RAS SErrors handled by the
firmware, for improved debugging.

Change-Id: Iaad8d183054d884f606dc4621da2cc6b2375bcf9
Signed-off-by: David Pu <dpu@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a build config 'RAS_TRAP_LOWER_EL_ERR_ACCESS' to set
SCR_EL3.TERR during CPU boot. This bit enables trapping RAS register
accesses from EL1 or EL2 to EL3.

RAS_TRAP_LOWER_EL_ERR_ACCESS is disabled by default.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifb0fb0afedea7dd2a29a0b0491a1161ecd241438

This patch introduces a function ID to clear all the RAS error
records for corrected errors.

Per latest requirement, ARM RAS corrected errors will be reported to
lower ELs via interrupts and cleared via SMC. This patch provides
required function to clear RAS error status.

This patch also sets up all required RAS Corrected errors in order to
route RAS corrected errors to lower ELs.

Change-Id: I554ba1d0797b736835aa27824782703682c91e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: David Pu <dpu@nvidia.com>

This patch adds all Tegra194 RAS nodes definitions and support to
handle all uncorrectable RAS errors.

Change-Id: I109b5a8dbca91d92752dc282c4ca30f273c475f9
Signed-off-by: David Pu <dpu@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

with sha 0792dd7d

, support to generate certificate for Secure
Partitions was added for dualroot CoT only, this patch extends
this support for tbbr CoT.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I451c0333536dd1cbe17861d454bdb0dc7a17c63f

The RK3368 has two clusters of 4 cores and it's cluster id starts at
bit 8 of the MPIDR.  To convert from the cluster id (0 or 1) to the
lowest CPU-ID in the respective cluster, we thus need to shift by 6
(i.e. shift by 8 to extract the cluster-id and multiply by 4).

This change is required to ensure the PSCI support can index the
per-cpu entry-address array correctly.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I64a76038f090a85a47067f09f750e96e3946e756

The Denver CPUs implement support for PMUv3 for ARMv8.1 and expect the
PMCR_EL0 to be saved in non-secure context.

This patch disables cycle counter when event counting is prohibited
immediately on entering the secure world to avoid leaking useful
information about the PMU counters. The context saving code later
saves the value of PMCR_EL0 to the non-secure world context.

Verified with 'PMU Leakage' test suite.

 ******************************* Summary *******************************
 > Test suite 'PMU Leakage'
                                                                 Passed
 =================================
 Tests Skipped : 2
 Tests Passed  : 2
 Tests Failed  : 0
 Tests Crashed : 0
 Total tests   : 4
 =================================
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I3675e2b99b44ed23d86e29a5af1b496e80324875