Skip to content

GitLab

Switch branch/tag
  1. 10 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      plat/arm: Move norflash driver to drivers/ folder · aa7877c4
      Antonio Nino Diaz authored 
      

This way it can be reused by other platforms if needed.

Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and FVP. In said platforms, the memory is organized as an
interleaved memory of two chips with a 16 bit word.

Any platform that wishes to reuse it with a different configuration will
need to modify the driver so that it is more generic.

Change-Id: Ic721758425864e0cf42b7b9b04bf0d9513b6022e
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      aa7877c4
  3. 28 Sep, 2018 5 commits
  5. 05 Sep, 2018 1 commit
  7. 04 Sep, 2018 2 commits
  9. 03 Sep, 2018 2 commits
  11. 30 Aug, 2018 5 commits
  13. 22 Aug, 2018 1 commit
  15. 20 Aug, 2018 1 commit
  17. 10 Aug, 2018 3 commits
  19. 30 Jul, 2018 2 commits
  21. 24 Jul, 2018 5 commits
  23. 18 Jul, 2018 6 commits
  25. 03 Jul, 2018 1 commit
    • Yann Gautier's avatar
      Add MMC framework · ad71d45e
      Yann Gautier authored 
      

This change is largely based on existing eMMC framework by Haojian Zhuang
(@hzhuang1).

The MMC framework supports both eMMC and SD card devices. It was
written as a new framework since breaking few eMMC framework APIs.

At card probe and after the reset to idle command (CMD0), a Send
Interface Condition Command is sent (CMD8) to distinguish between
eMMC and SD card devices. eMMC devices go through the same
sequence as in the former eMMC framework. Else the framework
uses commands dedicated to SD-cards for init or frequency switch.

A structure is created to share info with the driver. It stores:
- the MMC type (eMMC, SD or SD HC)
- the device size
- the max frequency supported by the device
- the block size: 512 for eMMC and SD-HC and read from CSD
 structure for older SD-cards

Restriction to align buffers on block size has been removed.
Cache maintenance was removed and is expected to be done in the platform
or device driver.

The MMC framework includes some MISRA compliance coding style
maybe not yet ported in the existing eMMC framework.

Fixes ARM-software/tf-issues#597
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      ad71d45e
  27. 19 Jun, 2018 1 commit
    • Antonio Nino Diaz's avatar
      plat/arm: Migrate AArch64 port to the multi console driver · 88a0523e
      Antonio Nino Diaz authored 
      

The old API is deprecated and will eventually be removed.

Arm platforms now use the multi console driver for boot and runtime
consoles. However, the crash console uses the direct console API because
it doesn't need any memory access to work. This makes it more robust
during crashes.

The AArch32 port of the Trusted Firmware doesn't support this new API
yet, so it is only enabled in AArch64 builds. Because of this, the
common code must maintain compatibility with both systems. SP_MIN
doesn't have to be updated because it's only used in AArch32 builds.
The TSP is only used in AArch64, so it only needs to support the new
API without keeping support for the old one.

Special care must be taken because of PSCI_SYSTEM_SUSPEND. In Juno, this
causes the UARTs to reset (except for the one used by the TSP). This
means that they must be unregistered when suspending and re-registered
when resuming. This wasn't a problem with the old driver because it just
restarted the UART, and there were no problems associated with
registering and unregistering consoles.

The size reserved for BL2 has been increased.

Change-Id: Icefd117dd1eb9c498921181a21318c2d2435c441
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      88a0523e
  29. 11 Jun, 2018 1 commit
  31. 17 May, 2018 1 commit
    • Daniel Boulby's avatar
      Ensure read and write of flags are 32 bit · 8abcdf92
      Daniel Boulby authored 
      

In 'console_set_scope' and when registering a console, field 'flags' of
'console_t' is assigned a 32-bit value. However, when it is actually
used, the functions perform 64-bit reads to access its value. This patch
changes all 64-bit reads to 32-bit reads.

Change-Id: I181349371409e60065335f078857946fa3c32dc1
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      8abcdf92
  33. 15 May, 2018 1 commit
  35. 11 May, 2018 1 commit
    • Antonio Nino Diaz's avatar
      plat/arm: Migrate AArch64 port to the multi console driver · 2f18aa1f
      Antonio Nino Diaz authored 
      

The old API is deprecated and will eventually be removed.

Arm platforms now use the multi console driver for boot and runtime
consoles. However, the crash console uses the direct console API because
it doesn't need any memory access to work. This makes it more robust
during crashes.

The AArch32 port of the Trusted Firmware doesn't support this new API
yet, so it is only enabled in AArch64 builds. Because of this, the
common code must maintain compatibility with both systems. SP_MIN
doesn't have to be updated because it's only used in AArch32 builds.
The TSP is only used in AArch64, so it only needs to support the new
API without keeping support for the old one.

Special care must be taken because of PSCI_SYSTEM_SUSPEND. In Juno, this
causes the UARTs to reset (except for the one used by the TSP). This
means that they must be unregistered when suspending and re-registered
when resuming. This wasn't a problem with the old driver because it just
restarted the UART, and there were no problems associated with
registering and unregistering consoles.

The size of BL31 has been increased in builds with SPM.

Change-Id: Icefd117dd1eb9c498921181a21318c2d2435c441
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      2f18aa1f