GitLab

Introduce platform handlers to reprogram the MSS settings.

Change-Id: Ibb9a5457d1bad9ecccea619d69a62bed3bf7d861
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch corrects the TEGRA_CAR_RESET_BASE macro value to
0x20000000 from 0x200000000.

Change-Id: Iba25394ea99237df85395c39059926c5a8b26a84
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds masks for the TZDRAM base/size registers.

Change-Id: I5f688793be8cace28d2aa2d177a295e4faffd666
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

T194 XUSB has support for XUSB virtualization. It will have one
physical function (PF) and four Virtual function (VF)

There were below two SIDs for XUSB until T186.
1) #define TEGRA_SID_XUSB_HOST    0x1bU
2) #define TEGRA_SID_XUSB_DEV    0x1cU

We have below four new SIDs added for VF(s)
3) #define TEGRA_SID_XUSB_VF0    0x5dU
4) #define TEGRA_SID_XUSB_VF1    0x5eU
5) #define TEGRA_SID_XUSB_VF2    0x5fU
6) #define TEGRA_SID_XUSB_VF3    0x60U

When virtualization is enabled then we have to disable SID override
and program above SIDs in below newly added SID registers in XUSB
PADCTL MMIO space. These registers are TZ protected and so need to
be done in ATF.
a) #define XUSB_PADCTL_HOST_AXI_STREAMID_PF_0 (0x136cU)
b) #define XUSB_PADCTL_DEV_AXI_STREAMID_PF_0  (0x139cU)
c) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_0 (0x1370U)
d) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_1 (0x1374U)
e) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_2 (0x1378U)
f) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_3 (0x137cU)

This change disables SID override and programs XUSB SIDs in
above registers to support both virtualization and non-virtualization.

Change-Id: I38213a72999e933c44c5392441f91034d3b47a39
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

The FPGA configuration is encoded in the high byte of
MISCREG_EMU_REVID. Configs GPU and MAX (encoded as
2 and 3) support the ISO SMMU, while BASE (encoded as 1)
does not. This patch implements this encoding and returns
the proper number of SMMU instances.

Change-Id: I024286b6091120c7602f63065d20ce48bcfd13fe
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch changes direct writes to ACTLR_ELx registers to use
read-modify-write instead.

Change-Id: I536dce75c01356ce054dd2edee80875e56164439
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds platform support for the Memory Controller and
SMMU drivers, for the Tegra194 SoC.

Change-Id: Id8b482de70f1f93bedbca8d124575c39b469927f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds macros to check the GPU reset status bit, before
resizing the VideoMem region.

Change-Id: I4377c1ce1ac6d3bd14c7db83526b99d72bdb41ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds macros defining the generalised security carveout
registers. These macros help us program the TZRAM carveout access
and the Video Protect Clear carveout access.

Change-Id: I8f7b24b653fdb702fb57a4097801cb3eae050294
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch defines the macro for the TEGRA_TMRUS aperture size.

Change-Id: I33fb674c6a7be8d02971667e7bf8650b7adc62ef
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds support for all three SMMU devices present on the SoC.

The following changes have been done:
    Add SMMU devices to the memory map
    Update register read and write functions

Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This reverts commit c41df8fda84b9bc56bbb2347fb902f64b1bb557e

Fake system suspend relies on software running on EL3
to trigger a warm reset.

Revert enabling fake system suspend, as the software
running on El3 is not allowed to trigger a warm reset.

Change-Id: I6035f2a7bcb0a4ad50a62c5bc5239226c625ee5e
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch updates all Tegra platforms to use the new multi console API.

Change-Id: I27c0c7830a86e26491dea9991a689f0b01e4dbf0
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>

NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.

All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.

Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>

Now it is needed to use the full path of the common header files.

Commit 09d40e0e

 ("Sanitise includes across codebase") provides more
information.

Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

This patch provides dummy macros and platform files to compile
the io_storage driver backend. This patch is necessary to
remove the "--unresolved=el3_panic" linker flag from Tegra's
makefiles and allow us to revert this workaround, previously
suggested by the ARM toolchain team.

The "--unresolved=el3_panic" flag actually was a big hammer that
allowed Tegra platforms to work with armlink previously but it
masks legit errors with the code as well.

Change-Id: I0421d35657823215229f84231896b84167f90548
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch stops including common_def.h from platform_def.h to
fix a circular depoendency between them.

This means platform_def.h now has to define the linker macros:
* PLATFORM_LINKER_FORMAT
* PLATFORM_LINKER_ARCH

Change-Id: Icd540b1bd32fb37e0e455e9146c8b7f4b314e012
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The scatterfile to support armlink, does not seem to support
shift operator. To handle this define CACHE_WRITEBACK_GRANULE with
the direct value.

Change-Id: I19afc7cb9c55a08cb0703f284d91018d3214353f
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

Platforms that do not support bpmp firmware, do not need access
to the PMC block from outside of the CPU complex. The agents
running on the CPU can always access the PMC through the EL3
exception space.

This patch restricts non-secure world access to the PMC block on
such platforms.

Change-Id: I2c4318dc07ddf6407c1700595e0f4aac377ba258
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the state machine to "not present" if the bpmp
firmware is not found in the system during boot. The suspend
handler also checks now if the interface exists, before updating
the internal state machine.

Reported by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

Change-Id: If8fd7f8e412bb603944555c24826855226e7f48c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the PMC's DPD registers on resuming from System
Suspend, for all Tegra210 platforms that support the sc7entry-fw.

Change-Id: I7881ef0a5f609ed28b158bc2f4016abea3c7f305
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

This patch adds suspend and resume handlers for the BPMP
interface. Mark the interface as "suspended" before entering
System Suspend and verify that BPMP is alive on exit.

Change-Id: I74ccbc86125079b46d06360fc4c7e8a5acfbdfb2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch skips past the signature header added to the sc7entry-fw
binary by the previous level bootloader. Currently, the size of
the header is 1KB, so adjust the start address and the binary size
at the time of copy.

Change-Id: Id0494548009749035846d54df417a960c640c8f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds SiP handler for Tegra210 platforms to service
read/write requests for PMC block. None of the secure registers
are accessible to the NS world though.

Change-Id: I7dc1f10c6a6ee6efc642ddcfb1170fb36d3accff
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

This patch puts all the DMA masters in reset before starting the System
Suspend sequence. This helps us make sure that there are no rogue agents
in the system trying to over-write the SC7 Entry Firmware with their own.

Change-Id: I7eb39999d229951e612fbfeb9f86c4efb8f98b5a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to enter System Suspend on Tegra210 platforms
without the traditional BPMP firmware. The BPMP firmware will no longer
be supported on Tegra210 platforms and its functionality will be
divided across the CPU and sc7entry-fw.

The sc7entry-fw takes care of performing the hardware sequence required
to enter System Suspend (SC7 power state) from the COP. The CPU is required
to load this firmware to the internal RAM of the COP and start the sequence.
The CPU also make sure that the COP is off after cold boot and is only
powered on when we want to start the actual System Suspend sequence.

The previous bootloader loads the firmware to TZDRAM and passes its base and
size as part of the boot parameters. The EL3 layer is supposed to sanitize
the parameters before touching the firmware blob.

To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
program PMC's scratch register #210, with appropriate values. Without these
settings the warmboot code wont be able to get the device out of System
Suspend.

Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes support for powering down a CPU cluster on
Tegra210 platforms as none of them actually use it.

Change-Id: I9665634cf2b5b7b8a1b5a2700cae152dc9165fe3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to enter/exit to/from cluster idle power
state on Tegra210 platforms that do not load BPMP firmware.

The CPU initates the cluster idle sequence on the last standing
CPU, by following these steps:

Entry
-----
* stop other CPUs from waking up
* program the PWM pinmux to tristate for OVR PMIC
* program the flow controller to enter CC6 state
* skip L1 $ flush during cluster power down, as L2 $ is inclusive
  of L1 $ on Cortex-A57 CPUs

Exit
----
* program the PWM pinmux to un-tristate for OVR PMIC
* allow other CPUs to wake up

This patch also makes sure that cluster idle state entry is not
enabled until CL-DVFS is ready.

Change-Id: I54cf31bf72b4a09d9bf9d2baaed6ee5a963c7808
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to find the last standing CPU
in a cluster.

Change-Id: Id018f1958f458c772c7b0c52af8ddf7532b1cec5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the PLAT_PHY_ADDR_SPACE_SIZE & PLAT_VIRT_ADDR_SPACE
macros to tegra_def.h, to define the virtual/physical address space
size on the platform.

Change-Id: I1c5d264c7ffc1af0e7b14cc16ae2c0416efc76f6
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch enables the watchdog timer's interrupt as an FIQ
interrupt to the CPU. The interrupt generated by the watchdog
is connected to the flow controller for power management reasons,
and needs to be routed to the GICD for it to reach the CPU.

Change-Id: I9437b516da2c5d763eca72694ed7f3c7389b3d9e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds helper functions to help platforms with cluster state entry
and exit decisions.

* tegra_fc_ccplex_pgexit_lock(): lock CPU power ungate
* tegra_fc_ccplex_pgexit_unlock(): unlock CPU power ungate
* tegra_fc_is_ccx_allowed(): CCx state entry allowed on this CPU?

Change-Id: I6490d34bf380dc03ae203eb3028f61984f06931c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

On earlier Tegra platforms, e.g. Tegra210, the watchdog timer's FIQ interrupt
is not direclty wired to the GICD. It goes to the flow controller instead, for
power state management. But the flow controller can route the FIQ to the GICD,
as a PPI, which can then get routed to the target CPU.

This patch adds routines to enable/disable routing the legacy FIQ used by
the watchdog timers, to the GICD.

Change-Id: Idd07c88c8d730b5f0e93e3a6e4fdc59bdcb2161b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Whenever the VPR memory is resized, the GPU is put into reset first
and then the new VPR parameters are programmed to the memory controller
block. There exists a scenario, where the GPU might be out before we
program the new VPR parameters. This means, the GPU would still be
using older settings and leak secrets.

This patch puts the GPU back into reset, if it is out of reset after
resizing VPR, to mitigate this hole.

Change-Id: I38a1000e3803f80909efcb02e27da4bd46909931
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

This patch adds support to the bpmp_ipc driver to allow clients to
enable/disable clocks to hardware blocks. Currently, the API only
supports SE devices.

Change-Id: I9a361e380c0bcda59f5a92ca51c86a46555b2e90
Signed-off-by: steven kao <skao@nvidia.com>

The GICD registers are 32-bits wide whereas the crash handler was reading
them as 64-bit ones. This patch fixes the code to read the GICD registers,
32-bits at a time, from the paltform's crash handler.

Change-Id: If3d6608529684ecc02be6a1b715012310813b2a4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a default implementation for the platform specific
CPU standby power handler. Tegra SoCs can override this handler
with their own implementations.

Change-Id: I91e513842f194b1e2b1defa2d833bb4d9df5f06b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Modifying smmu macros to pass base address of smmu so that it can be
used with multiple smmus.

Added macro for combining smmu backup regs that can be used for multiple
smmus.

Change-Id: I4f3bb83d66d5df14a3b91bc82f7fc26ec8e4592e
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch adds a platform setup handler that gets called after
the MMU is enabled. Platforms wanting to make use of this handler
should declare 'plat_late_platform_setup' handler in their platform
files, to override the default weakly defined handler.

Change-Id: Ibc97a2e5a24608ddea856d0bd543a9d5876f604c
Signed-off-by: Dilan Lee <dilee@nvidia.com>