GitLab

Enhanced Counter Virtualization, ECV, is an architecture extension introduced
in ARMv8.6. This extension allows the hypervisor, at EL2, to setup
self-synchronizing views of the timers for it's EL1 Guests. This patch pokes the
control register to enable this extension when booting a hypervisor at EL2.

Change-Id: I4e929ecdf400cea17eff1de5cf8704aa7e40973d
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

The Fine Grained Traps (FGT) architecture extension was added to aarch64 in
ARMv8.6. This extension primarily allows hypervisors, at EL2, to trap specific
instructions in a more fine grained manner, with an enable bit for each
instruction. This patch adds support for this extension by enabling the
extension when booting an hypervisor at EL2.

Change-Id: Idb9013ed118b6a1b7b76287237096de992ca4da3
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Change-Id: I89b90cbdfc8f2aa898b4f3676a4764f060f8e138
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

This should allow git to easily track file moves
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: I1592cf39a4f94209c560dc6d1a8bc1bfb21d8327

This patch fixes wrong ID_AA64DFR0_EL1 register read instead of
ID_AA64PFR0_EL1 to detect support for MPAM extension.
It also implements get_mpam_version() function which returns
MPAM version as:
0x00: None Armv8.0 or later;
0x01: v0.1 Armv8.4 or later;
0x10: v1.0 Armv8.2 or later;
0x11: v1.1 Armv8.4 or later;

Change-Id: I31d776b1a1b60cb16e5e62296d70adb129d7b760
Reported-by: Matteo Zini <matteozini96@gmail.com>
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.

The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d

Removing FPEXC32_EL2 from the register save/restore routine for EL2
registers since it is already a part of save/restore routine for
fpregs.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I5ed45fdbf7c8efa8dcfcd96586328d4f6b256bc4

During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.

Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
   bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
   system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)

Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924

More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html



Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0

Dynamic configuration properties are fconf properties. Modify the
compatible string from "arm,.." to "fconf,.." to reflect this.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Change-Id: I85eb75cf877c5f4d3feea3936d4c348ca843bc6c

Our fdtw_read_cells() implementation goes to great lengths to
sanity-check every parameter and result, but leaves a big hole open:
The size of the storage the value pointer points at needs to match the
number of cells given. This can't be easily checked at compile time,
since we lose the size information by using a void pointer.
Regardless the current usage of this function is somewhat wrong anyways,
since we use it on single-element, fixed-length properties only, for
which the DT binding specifies the size.
Typically we use those functions dealing with a number of cells in DT
context to deal with *dynamically* sized properties, which depend on
other properties (#size-cells, #clock-cells, ...), to specify the number
of cells needed.

Another problem with the current implementation is the use of
ambiguously sized types (uintptr_t, size_t) together with a certain
expectation about their size. In general there is no relation between
the length of a DT property and the bitness of the code that parses the
DTB: AArch64 code could encounter 32-bit addresses (where the physical
address space is limited to 4GB [1]), while AArch32 code could read
64-bit sized properties (/memory nodes on LPAE systems, [2]).

To make this more clear, fix the potential issues and also align more
with other DT users (Linux and U-Boot), introduce functions to explicitly
read uint32 and uint64 properties. As the other DT consumers, we do this
based on the generic "read array" function.
Convert all users to use either of those two new functions, and make
sure we never use a pointer to anything other than uint32_t or uint64_t
variables directly.

This reveals (and fixes) a bug in plat_spmd_manifest.c, where we write
4 bytes into a uint16_t variable (passed via a void pointer).

Also we change the implementation of the function to better align with
other libfdt users, by using the right types (fdt32_t) and common
variable names (*prop, prop_names).

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi#n874
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-2000.dts



Change-Id: I718de960515117ac7a3331a1b177d2ec224a3890
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This patch adds code to parse memory range information passed by
coreboot, and a simple helper to test whether a specific address belongs
to a range. This may be useful for coreboot-using platforms that need to
know information about the system's memory layout (e.g. to check whether
an address passed in via SMC targets valid DRAM).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3bea326c426db27d1a8b7d6e17418e4850e884b4

bakery_lock_normal.c uses the raw register accessor, read_sctlr(_el3)
to check whether the dcache is enabled.

Using is_dcache_enabled() is cleaner, and a good abstraction for
the library code like this.

A problem is is_dcache_enabled() is declared in the local header,
lib/xlat_tables_v2/xlat_tables_private.h

I searched for a good place to declare this helper. Moving it to
arch_helpers.h, closed to cache operation helpers, looks good enough
to me.

I also changed the type of 'is_cached' to bool for consistency,
and to avoid MISRA warnings.

Change-Id: I9b016f67bc8eade25c316aa9c0db0fa4cd375b79
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Present framework restricts platform to pass desired shareability attribute
for normal memory region mapped in MMU. it defaults to inner shareability.

There are platforms where memories (like SRAM) are not placed at snoopable
region in advaned interconnect like CCN/CMN hence snoopable transaction is
not possible to these memory. Though These memories could be mapped in MMU
as MT_NON_CACHEABLE, data caches benefits won't be available.

If these memories are mapped as cacheable with non-shareable attribute,
when only one core is running like at boot time, MMU data cached could be
used for faster execution. Hence adding support to pass the shareability
attribute for memory regions.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I678cb50120a28dae4aa9d1896e8faf1dd5cf1754

Using get_current_el_maybe_constant() produces more optimized code
because in most cases, we know the exception level at build-time.
For example, BL31 runs at EL3, so unneeded code will be trimmed.

[before]

0000000000000000 <is_dcache_enabled>:
   0:   d5384240        mrs     x0, currentel
   4:   53020c00        ubfx    w0, w0, #2, #2
   8:   7100041f        cmp     w0, #0x1
   c:   54000081        b.ne    1c <is_dcache_enabled+0x1c>  // b.any
  10:   d5381000        mrs     x0, sctlr_el1
  14:   53020800        ubfx    w0, w0, #2, #1
  18:   d65f03c0        ret
  1c:   7100081f        cmp     w0, #0x2
  20:   54000061        b.ne    2c <is_dcache_enabled+0x2c>  // b.any
  24:   d53c1000        mrs     x0, sctlr_el2
  28:   17fffffb        b       14 <is_dcache_enabled+0x14>
  2c:   d53e1000        mrs     x0, sctlr_el3
  30:   17fffff9        b       14 <is_dcache_enabled+0x14>

[after]

0000000000000000 <is_dcache_enabled>:
   0:   d53e1000        mrs     x0, sctlr_el3
   4:   53020800        ubfx    w0, w0, #2, #1
   8:   d65f03c0        ret

Change-Id: I3698fae9b517022ff9fbfd4cad3a320c6e137e10
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

If PLAT_RO_XLAT_TABLES is defined, the base xlat table goes to the
.rodata section instead of .bss section.

This causes a warning like:

/tmp/ccswitLr.s: Assembler messages:
/tmp/ccswitLr.s:297: Warning: setting incorrect section attributes for .rodata

It is practically no problem, but I want to keep the build log clean.

Put the base table into the "base_xlat_table" section to suppress the
assembler warnings.

The linker script determines its final destination; rodata section if
PLAT_RO_XLAT_TABLES=1, or bss section otherwise. So, the result is the
same.

Change-Id: Ic85d1d2dddd9b5339289fc2378cbcb21dd7db02e
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

fconf_dyn_cfg_getter.c calls FCONF_REGISTER_POPULATOR(), which populates
the fconf_populator structure.

However, bl1/bl1.ld.S does not have:

        __FCONF_POPULATOR_START__ = .;
        KEEP(*(.fconf_populator))
        __FCONF_POPULATOR_END__ = .;

So, this is not linked to bl1.elf

We could change either bl1/bl1.lds.S or lib/fconf/fconf.mk to make
them consistent.

I chose to fix up fconf.mk to keep the current behavior.

This is a groundwork to factor out the common code from linker scripts.

Change-Id: I07b7ad4db4ec77b57acf1588fffd0b06306d7293
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.

Change-Id: I0657968bfcb91c32733f75f9259f550a5c35b1c3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Notify if fw_config dt is either not available or not loaded from fip.

Change-Id: I4dfcbe5032503d97f532a3287c5312c581578b68
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

TPIDR_EL2 is missing from the EL2 state register save/restore
sequence. This patch adds it to the context save restore routines.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35fc5ee82f97b72bcedac57c791312e7b3a45251

Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
removes the duplicate io_policies and functions definition.

This patch:
- replace arm_io_storage.c with the content of arm_fconf_io_storage.c
- rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
- use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
- propagate DEFINES when parsing dts.
- use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
- set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
  of fvp stays the same as it was before the introduction of fconf.

Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

A populate() function essentially captures the value of a property,
defined by a platform, into a fconf related c structure. Such a
callback is usually platform specific and is associated to a specific
configuration source.
For example, a populate() function which captures the hardware topology
of the platform can only parse HW_CONFIG DTB. Hence each populator
function must be registered with a specific 'config_type' identifier.
It broadly represents a logical grouping of configuration properties
which is usually a device tree source file.

Example:
> TB_FW: properties related to trusted firmware such as IO policies,
	 base address of other DTBs, mbedtls heap info etc.
> HW_CONFIG: properties related to hardware configuration of the SoC
	 such as topology, GIC controller, PSCI hooks, CPU ID etc.

This patch modifies FCONF_REGISTER_POPULATOR macro and fconf_populate()
to register and invoke the appropriate callbacks selectively based on
configuration type.

Change-Id: I6f63b1fd7a8729c6c9137d5b63270af1857bb44a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

xlat_tables_v2_helpers.h defines two quite similar macros,
REGISTER_XLAT_CONTEXT_FULL_SPEC and REGISTER_XLAT_CONTEXT_RO_BASE_TABLE.

Only the difference is the section of _ctx_name##_base_xlat_table.

Parameterize it and unify these two macros.

The base xlat table goes into the .bss section by default.
If PLAT_RO_XLAT_TABLES is defined, it goes into the .rodata section.

Change-Id: I8b02f4da98f0c272e348a200cebd89f479099c55
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The denver_enable_dco and denver_disable_dco use register X3 to store
the return address. But X3 gets over-written by other functions,
downstream.

This patch stores the return address to X18 instead, to fix this
anomaly.

Change-Id: Ic40bfc1d9abaa7b90348843b9ecd09521bb4ee7b
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

ARM has a weak memory ordering model. This means that without
explicit barriers, memory accesses can be observed differently
than program order. In this case, the cache invalidate instruction
can be observed after the subsequent read to address.

To solve this, a DMB instruction is required between the cache
invalidate and the read. This ensures that the cache invalidate
completes before all memory accesses in program order after the DMB.

This patch updates the 'read_cache_op' macro to issue a DMB after
the cache invalidate instruction to fix this anomaly.

Change-Id: Iac9a90d228c57ba8bcdca7e409ea6719546ab441
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registers are still not covered in save/restore.
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2

Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location for the coreboot memory console.
This removes the base member from the coreboot specific data structure,
but keeps the struct console_cbmc_t and its size member.

Change-Id: I7f1dffd41392ba3fe5c07090aea761a42313fb5b
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.

The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.

To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.

Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.

The caches are also flushed.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466

The CPUACTLR_EL1 register on Cortex-A57 CPUs supports a bit to enable
non-cacheable streaming enhancement. Platforms can set this bit only
if their memory system meets the requirement that cache line fill
requests from the Cortex-A57 processor are atomic.

This patch adds support to enable higher performance non-cacheable load
forwarding for such platforms. Platforms must enable this support by
setting the 'A57_ENABLE_NONCACHEABLE_LOAD_FWD' flag from their
makefiles. This flag is disabled by default.

Change-Id: Ib27e55dd68d11a50962c0bbc5b89072208b4bac5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Fixes for the following MISRA violations:
- Missing explicit parentheses on sub-expression
- An identifier or macro name beginning with an
  underscore, shall not be declared
- Type mismatch in BL1 SMC handlers and tspd_main.c

Change-Id: I7a92abf260da95acb0846b27c2997b59b059efc4
Signed-off-by: Zelalem <zelalem.aweke@arm.com>

Also update copyright statements

Change-Id: Iba0305522ac0f2ddc4da99127fd773f340e67300
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Change-Id: I686fd623b8264c85434853a2a26ecd71e9eeac01
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Use the firmware configuration framework in arm dynamic configuration
to retrieve mbedtls heap information between bl1 and bl2.

For this, a new fconf getter is added to expose the device tree base
address and size.

Change-Id: Ifa5ac9366ae100e2cdd1f4c8e85fc591b170f4b6
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Use fconf to retrieve the `disable_authentication` property.
Move this access from arm dynamic configuration to bl common.

Change-Id: Ibf184a5c6245d04839222f5457cf5e651f252b86
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

This patch introduces a better separation between the trusted-boot
related properties, and the dynamic configuration DTBs loading
information.

The dynamic configuration DTBs properties are moved to a new node:
`dtb-registry`. All the sub-nodes present will be provided to the
dynamic config framework to be loaded. The node currently only contains
the already defined configuration DTBs, but can be extended for future
features if necessary.
The dynamic config framework is modified to use the abstraction provided
by the fconf framework, instead of directly accessing the DTBs.

The trusted-boot properties are kept under the "arm,tb_fw" compatible
string, but in a separate `tb_fw-config` node.
The `tb_fw-config` property of the `dtb-registry` node simply points
to the load address of `fw_config`, as the `tb_fw-config` is currently
part of the same DTB.

Change-Id: Iceb6c4c2cb92b692b6e28dbdc9fb060f1c46de82
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Use the dtb provided by bl1 as configuration file for fconf.

Change-Id: I3f466ad9b7047e1a361d94e71ac6d693e31496d9
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Move the loading of the dtb from arm_dym_cfg to fconf. The new loading
function is not associated to arm platform anymore, and can be moved
to bl_main if wanted.

Change-Id: I847d07eaba36d31d9d3ed9eba8e58666ea1ba563
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Introduce the Firmware CONfiguration Framework (fconf).

The fconf is an abstraction layer for platform specific data, allowing
a "property" to be queried and a value retrieved without the requesting
entity knowing what backing store is being used to hold the data.

The default backing store used is C structure. If another backing store
has to be used, the platform integrator needs to provide a "populate()"
function to fill the corresponding C structure.
The "populate()" function must be registered to the fconf framework with
the "FCONF_REGISTER_POPULATOR()". This ensures that the function would
be called inside the "fconf_populate()" function.

A two level macro is used as getter:
- the first macro takes 3 parameters and converts it to a function
  call: FCONF_GET_PROPERTY(a,b,c) -> a__b_getter(c).
- the second level defines a__b_getter(c) to the matching C structure,
  variable, array, function, etc..

Ex: Get a Chain of trust property:
    1) FCONF_GET_PROPERY(tbbr, cot, BL2_id) -> tbbr__cot_getter(BL2_id)
    2) tbbr__cot_getter(BL2_id) -> cot_desc_ptr[BL2_id]

Change-Id: Id394001353ed295bc680c3f543af0cf8da549469
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Fix code that violates the MISRA rule:
MISRA C-2012 Rule 11.9: Literal "0" shall not be used as
null pointer constant.

The fix explicitly checks whether a pointer is NULL.

Change-Id: Ibc318dc0f464982be9a34783f24ccd1d44800551
Signed-off-by: Zelalem <zelalem.aweke@arm.com>

This patch removes unnecessary header file includes
discovered by Coverity HFA option.

Change-Id: I2827c37c1c24866c87db0e206e681900545925d4
Signed-off-by: Zelalem <zelalem.aweke@arm.com>