Skip to content

GitLab

Switch branch/tag
  1. 08 Apr, 2019 2 commits
    • Joel Hutton's avatar
      cot-desc: optimise memory further · 30070427
      Joel Hutton authored 
      

This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.

memory diff:
bl1:        bl2:
    text        text
      -12         -12
    bss         bss
      -1463       0
    data        data
      -56         -48
    rodata      rodata
      -5688       -2592
    total       total
      -7419       -2652

Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      30070427
    • Joel Hutton's avatar
      Reduce memory needed for CoT description · 0b6377d1
      Joel Hutton authored 
      

When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].

Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.

Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.

Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.

memory diff:
bl1:        bl2:
    text        text
      -20         -20
    bss         bss
      -1463       0
    data        data
      -256        -48
    rodata      rodata
      -5240       -1952
    total       total
      -6979       -2020

Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      0b6377d1
  3. 03 Apr, 2019 1 commit
  5. 02 Apr, 2019 1 commit
  7. 01 Apr, 2019 1 commit
    • Ambroise Vincent's avatar
      Remove several warnings reported with W=1 · 609e053c
      Ambroise Vincent authored 
      

Improved support for W=1 compilation flag by solving missing-prototypes
and old-style-definition warnings.

The libraries are compiling with warnings (which turn into errors with
the Werror flag).

Outside of libraries, some warnings cannot be fixed without heavy
structural changes.

Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16
Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
      609e053c
  9. 13 Mar, 2019 1 commit
  11. 12 Mar, 2019 2 commits
    • Paul Beesley's avatar
      drivers: Remove TODO from io_storage · 9a2fffb8
      Paul Beesley authored 
      

This TODO was added five years ago so I assume that there is not
going to be a shutdown API added after all.

Change-Id: If0f4e2066454df773bd9bf41ed65d3a10248a2d3
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      9a2fffb8
    • Tien Hock, Loh's avatar
      drivers: synopsys: Fix synopsys MMC driver · 3d0f30bb
      Tien Hock, Loh authored 
      

There are some issues with synopsys MMC driver:
- CMD8 should not expect data (for SD)
- ACMD51 should expect data (Send SCR for SD)
- dw_prepare should not dictate size to be MMC_BLOCK_SIZE, block size is
now handled in the dw_prepare function
- after the CMD completes, when doing dw_read, we need to invalidate cache
and wait for the data transfer to complete
- Need to set FIFO threshold, otherwise DMA might never get the interrupt
to read or write
Signed-off-by: default avatarTien Hock, Loh <tien.hock.loh@intel.com>
      3d0f30bb
  13. 07 Mar, 2019 1 commit
    • Tien Hock, Loh's avatar
      drivers: mmc: Fix some issues with MMC stack · a468e756
      Tien Hock, Loh authored 
      

Some bugs in MMC stack needs to be fixed:
- scr cannot be local as this will cause cache issue when invalidating
after the read DMA transfer is completed
- ACMD41 needs to send voltage information in initialization, otherwise the
command is a query, thus will not initialize the controller
- when checking device state, retry until the retries counter goes to zero
before failing
Signed-off-by: default avatarTien Hock, Loh <tien.hock.loh@intel.com>
      a468e756
  15. 26 Feb, 2019 1 commit
    • Ying-Chun Liu (PaulLiu)'s avatar
      rpi3: sdhost: SDHost driver improvement · 2c8ef2ae
      Ying-Chun Liu (PaulLiu) authored 
      

This commit improves the SDHost driver for RPi3 as following:
 * Unblock MMC_CMD(17). Using MMC_CMD(17) is more efficient on
   block reading.
 * In some low probability that SEND_OP_COND might results CRC7
   error. We can consider that the command runs correctly. We don't
   need to retry this command so removing the code for retry.
 * Using MMC_BUS_WIDTH_1 as MMC default value to improve the stability.
 * Increase the clock to 50Mhz in data mode to speed up the io.
 * Change the pull resistors configuration to gain more stability.
Signed-off-by: default avatarYing-Chun Liu (PaulLiu) <paulliu@debian.org>
      2c8ef2ae
  17. 20 Feb, 2019 1 commit
  19. 14 Feb, 2019 6 commits
  21. 31 Jan, 2019 1 commit
  23. 25 Jan, 2019 7 commits
  25. 22 Jan, 2019 1 commit
    • Andrew F. Davis's avatar
      ti: k3: common: Add support for runtime detection of GICR base address · b5443284
      Andrew F. Davis authored 
      

Valid addresses for GICR base are always a set calculable distance from
the GICD and is based on the number of cores a given instance of GICv3 IP
can support. The formula for the number of address bits is given by the
ARM GIC-500 TRM section 3.2 as 2^(18+log2(cores)) with the MSB set to
one for GICR instances. Holes in the GIC address space are also
guaranteed to safely return 0 on reads. This allows us to support runtime
detection of the GICR base address by starting from GIC base address plus
BIT(18) and walking until the GICR ID register (IIDR) is detected. We
stop searching after BIT(20) to prevent searching out into space if
something goes wrong. This can be extended out if we ever have a device
with 16 or more cores.
Signed-off-by: default avatarAndrew F. Davis <afd@ti.com>
      b5443284
  27. 18 Jan, 2019 6 commits
  29. 07 Jan, 2019 1 commit
  31. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored 
      Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
  33. 14 Dec, 2018 1 commit
    • Jeenu Viswambharan's avatar
      GIC: Remove lowest priority constants · 35cd9e81
      Jeenu Viswambharan authored 
      

The GIC lowest priority values for each world depends on the number of
priority values implemented in hardware. These constants currently
defined in gic_common.h only meant to enumerate lowest possible
architectural values. Since these values are not used in generic code or
upstream platforms, and that general use of these constants can be
wrong, remove these. Platforms should either define and use these as
appropriate, or determine correct values at run time.

Change-Id: I3805cea8ceb8a592b9eff681ea1b63b7496cec5f
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      35cd9e81
  35. 07 Dec, 2018 1 commit
  37. 04 Dec, 2018 2 commits
  39. 23 Nov, 2018 1 commit
  41. 21 Nov, 2018 1 commit