1. 24 Jun, 2020 1 commit
    • Manish V Badarkhe's avatar
      plat/arm: Rentroduce tb_fw_config device tree · 3cb84a54
      Manish V Badarkhe authored
      
      
      Moved BL2 configuration nodes from fw_config to newly
      created tb_fw_config device tree.
      
      fw_config device tree's main usage is to hold properties shared
      across all BLx images.
      An example is the "dtb-registry" node, which contains the
      information about the other device tree configurations
      (load-address, size).
      
      Also, Updated load-address of tb_fw_config which is now located
      after fw_config in SRAM.
      Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      Change-Id: Ic398c86a4d822dacd55b5e25fd41d4fe3888d79a
      3cb84a54
  2. 16 Mar, 2020 1 commit
    • Louis Mayencourt's avatar
      fconf: Clean Arm IO · a6de824f
      Louis Mayencourt authored
      
      
      Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
      removes the duplicate io_policies and functions definition.
      
      This patch:
      - replace arm_io_storage.c with the content of arm_fconf_io_storage.c
      - rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
      - use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
      - propagate DEFINES when parsing dts.
      - use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
      - set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
        of fvp stays the same as it was before the introduction of fconf.
      
      Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
      Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
      a6de824f
  3. 07 Feb, 2020 2 commits
    • Louis Mayencourt's avatar
      fconf: Add dynamic config DTBs info as property · 25ac8794
      Louis Mayencourt authored
      
      
      This patch introduces a better separation between the trusted-boot
      related properties, and the dynamic configuration DTBs loading
      information.
      
      The dynamic configuration DTBs properties are moved to a new node:
      `dtb-registry`. All the sub-nodes present will be provided to the
      dynamic config framework to be loaded. The node currently only contains
      the already defined configuration DTBs, but can be extended for future
      features if necessary.
      The dynamic config framework is modified to use the abstraction provided
      by the fconf framework, instead of directly accessing the DTBs.
      
      The trusted-boot properties are kept under the "arm,tb_fw" compatible
      string, but in a separate `tb_fw-config` node.
      The `tb_fw-config` property of the `dtb-registry` node simply points
      to the load address of `fw_config`, as the `tb_fw-config` is currently
      part of the same DTB.
      
      Change-Id: Iceb6c4c2cb92b692b6e28dbdc9fb060f1c46de82
      Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
      25ac8794
    • Louis Mayencourt's avatar
      fconf: Load config dtb from bl1 · 3b5ea741
      Louis Mayencourt authored
      
      
      Move the loading of the dtb from arm_dym_cfg to fconf. The new loading
      function is not associated to arm platform anymore, and can be moved
      to bl_main if wanted.
      
      Change-Id: I847d07eaba36d31d9d3ed9eba8e58666ea1ba563
      Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
      3b5ea741
  4. 23 Jul, 2019 1 commit
    • Ambroise Vincent's avatar
      arm: Shorten the Firmware Update (FWU) process · 37b70031
      Ambroise Vincent authored
      
      
      The watchdog is configured with a default value of 256 seconds in order
      to implement the Trusted Board Boot Requirements.
      
      For the FVP and Juno platforms, the FWU process relies on a watchdog
      reset. In order to automate the test of FWU, the length of this process
      needs to be as short as possible. Instead of waiting for those 4 minutes
      to have a reset by the watchdog, tell it to reset immediately.
      
      There are no side effects as the value of the watchdog's load register
      resets to 0xFFFFFFFF.
      
      Tested on Juno.
      
      Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
      Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
      37b70031
  5. 16 Jul, 2019 1 commit
    • Usama Arif's avatar
      plat/arm: Introduce A5 DesignStart platform. · 00c7d5ac
      Usama Arif authored
      
      
      This patch adds support for Cortex-A5 FVP for the
      DesignStart program. DesignStart aims at providing
      low cost and fast access to Arm IP.
      
      Currently with this patch only the primary CPU is booted
      and the rest of them wait for an interrupt.
      Signed-off-by: default avatarUsama Arif <usama.arif@arm.com>
      Change-Id: I3a2281ce6de2402dda4610a89939ed53aa045fab
      00c7d5ac
  6. 28 Jun, 2019 1 commit
  7. 19 Feb, 2019 1 commit
    • Usama Arif's avatar
      plat/arm: Introduce FVP Versatile Express platform. · 6393c787
      Usama Arif authored
      
      
      This patch adds support for Versatile express FVP (Fast models).
      Versatile express is a family of platforms that are based on ARM v7.
      Currently this port has only been tested on Cortex A7, although it
      should work with other ARM V7 cores that support LPAE, generic timers,
      VFP and hardware divide. Future patches will support other
      cores like Cortex A5 that dont support features like LPAE
      and hardware divide. This platform is tested on and only expected to
      work on single core models.
      
      Change-Id: I10893af65b8bb64da7b3bd851cab8231718e61dd
      Signed-off-by: default avatarUsama Arif <usama.arif@arm.com>
      6393c787