GitLab

As part of the code refactoring fix the order of the include files
across all the source files.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice72f687cc26ee881a9051168149467688100cfb

Remove the GXBB prefix from the code in the common directory and add
SoC-specific prefixes in the SoC specific code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic983ef70b0ef23f95088dd8df488d8c42c3bc030

Add a new aml_* prefix to the SCPI related function calls.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I697812ac1c0df28cbb639a1dc3e838f1107fb739

The code is the common directory is now generic, no need to have the SoC
prefix hardcoded in the function names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ied3a5e506b9abd4c2d6f893bafef50019bff24f1

Now that also the SHA256 DMA driver is shared between all the SoCs, we
can have one single private platform header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I77d51915f9d8233aeceeed66ed1f491573402cfc

Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d

The CPU[1-3] are reset to initial/cold boot state (with their reset
address set to 0x0). In this state the cpus are waiting for another
one to set the reset address to bl31_warm_entrypoint and wake them up.

The CPU0 needs a bit of a workaround as changing the reset address
either through PSCI mailbox or the mmio mapped RVBAR (at 0xda834650)
does not seem to have any effect. Thus the workaround consists in
emulating the other CPUs' behavior with a WFE loop and manually jumping
to bl31_warm_entrypoint when woken back up by another one.

Change-Id: I11265620b5fd0619285e3993253a3f9a3ff6a7a4
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

Before CPU enters standby state (wfi), the AP needs to signal the SCP
through PSCI mailbox.

Also at boot time the AP has to wait for the SCP to be ready before
sending the first scpi commands or it can crash.

Change-Id: Iacc99f5bec745ad71922c5ea07ca5b87088133b6
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

The Amlogic Meson S905x is a SoC with a quad core Arm Cortex-A53 running
at 1.5Ghz. It also contains a Cortex-M3 used as SCP.

This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux:

- Partial SCPI support.
- Basic PSCI support (CPU_ON, SYSTEM_RESET, SYSTEM_OFF).
- GICv2 driver set up.
- Basic SIP services (read efuse data, enable/disable JTAG).

This port has been tested on a lepotato.
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

There seems to be a problem where SCP can't turn CPU0 off. Instead of
returning PSCI_E_DENIED or crashing make CPU0 wait in a WFE loop. This
way all CPUs have a consistent behaviour from the point of view of the
caller.

Change-Id: I5c8c266ca3b69c9e7a4f5ae70afeea5dd36a0825
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This works fine for CPU1-3, but it fails for CPU0, where it is simply
ignored and leaves CPU0 in a WFI loop.

Change-Id: I7d73683fdd894f2021d6a5bc2cce6cd03e18e633
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The Amlogic Meson S905 is a SoC with a quad core Arm Cortex-A53 running
at 1.5Ghz. It also contains a Cortex-M3 used as SCP.

This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux:

- Partial SCPI support.
- Basic PSCI support (CPU_ON, SYSTEM_RESET, SYSTEM_OFF).
- GICv2 driver set up.
- Basic SIP services (read efuse data, enable/disable JTAG).

This port has been tested in an ODROID-C2.

Change-Id: Ia4bc82d7aca42a69d6b118b947279f82b3f6c6da
Tested-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>