GitLab

This patch adds a new configuration option to the platform makefiles
that disables/enables strict checking mode. The config is enabled
by default.

Change-Id: I727dd0facee88d9517bf6956eaf9163eba25c8bb
Signed-off-by: Steven Kao <skao@nvidia.com>

The MCE driver's helper functions were using postive values as error
codes.

This patch updates the functions to return negative values as error
codes instead. Some functions are updated to use the right error code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I3e2ecc30a6272a357e1a22ec850543fde2a694f6

"Strict checking" is a mode where secure world can access
secure-only areas unlike legacy mode where secure world could
access non-secure spaces as well. Secure-only areas are defined
as the TZ-DRAM carveout and any GSC with the CPU_SECURE bit set.
This mode not only helps prevent issues with IO-Coherency but aids
with security as well.

This patch implements the programming sequence required to enable
strict checking mode for Tegra194 SoCs.

Change-Id: Ic2e594f79ec7c5bc1339b509e67c4c62efb9d0c0
Signed-off-by: Dilan Lee <dilee@nvidia.com>

The MCE driver checks the NVG interface version during boot and
disaplys the hardware and software versions on the console. The
software version is being displayed as zero.

This patch updates the prints to use the real NVG header version
instead.

Change-Id: I8e9d2e6c43a59a8a6d5ca7aa8153b940fce86709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch does the following:
- cstate_info variable is used to pass on requested cstate to mce
- Currently, cg_cstate is encoded using 2 bits(bits 8, 9) in cstate_info
- cg_cstate values can range from 0 to 7, with 7 representing cg7
- Thus, cg_cstate is to be encoded using 3 bits (val: 0-7)
- Fix this, as per ISS and ensure bits 8, 9, 10 are used

Change-Id: Idff207e2a88b2f4654e4a956c27054bf5e8f69bb
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch cleans up the mce driver files to remove all the unsupported
functionality. The MCE/NVG interface is not restricted to the EL3 space,
so clients can issue commands to the MCE firmware directly.

Change-Id: Idcebc42f31805f9c1abe1c1edc17850151aca11d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]

Fix variable essential type doesn't match [Rule 10.3]

Added curly braces ({}) around if/while statements in order to
  make them compound [Rule 15.6]

Voided non c-library functions whose return types are not used
  [Rule 17.7]

Change-Id: Iaae2ecaba3caf1469c44910d4e6aed0661597a51
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch updates t194_nvg.h to v6.1 and does not issue NVG
commands for unsupported platforms.

Change-Id: I506b594a70a3651d01a412ab79b3c8919b1d66f1
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch updates the cache ops to use system registers in
order to trigger cache flush/clean operations.

Change-Id: I888abad22f22b8a33c7193b991fad8c4a78030d0
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch adds proper checks for the cpu c-stats. It checks both
cpu id and stat id before sending the nvg request to ccplex.

Change-Id: I732957d1e10d6ce6cffb2c6f5963ca614aadd948
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>

This patch changes direct writes to ACTLR_ELx registers to use
read-modify-write instead.

Change-Id: I536dce75c01356ce054dd2edee80875e56164439
Signed-off-by: Steven Kao <skao@nvidia.com>

To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.

Change-Id: I09e96a1874dd86626c7e41c92a1484a84e387402
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Dont run MCE firmware on pre-silicon emulation platforms

Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>

This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:

- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests

Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>

This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.

Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>