GitLab

At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any BL33 user would typically looks at the devicetree to learn about
existing CPUs.

This patch exports a minimum /cpus node in a devicetree to satisfy
the binding. This means that no cpumaps or caches are described.
This could be added later if needed.

An existing /cpus node in the DT will make the code bail out with a
message.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I589a2b3412411a3660134bdcef3a65e8200e1d7e

* changes:
  Tegra: common: disable GICC after domain off
  cpus: denver: skip DCO enable/disable for recent SKUs

This patch creates and populates the /cpus node in a device tree
based on the existing topology. It uses the minimum required nodes
and properties to satisfy the binding as specified in
https://www.kernel.org/doc/Documentation/devicetree/bindings/arm/cpus.txt

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I03bf4e9a6427da0a3b8ed013f93d7bc43b5c4df0

* changes:
  Tegra: platform specific BL31_SIZE
  Tegra186: sanity check power state type
  Tegra: fixup CNTPS_TVAL_EL1 delay timer reads
  Tegra: add platform specific 'runtime_setup' handler
  Tegra: remove ENABLE_SVE_FOR_NS = 0
  lib: cpus: denver: add MIDR PN9 variant
  cpus: denver: introduce macro to declare cpu_ops

This patch implements support for the 64-bit and 32-bit versions of
0xBF00FF01 SMC function ID, as documented by the SMCCC, to allow
non-secure world clients to query SPD's UUID.

In order to service this FID, the Trusty SPD now increases the range
of SMCs that it services. To restrict Trusty from receiving the extra
SMC FIDs, this patch drops any unsupported FID.

Verified with TFTF tests for UID query and internal gtest for Trusty.

Change-Id: If96fe4993f7e641595cfe67cc6b4210a0d52403f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

If the CPU doesn't run from BL31_BASE, the firmware needs to be
copied from load address to BL31_BASE during cold boot. The size
should be the actual size of the code, which is indicated by the
__RELA_END__ linker variable.

This patch updates the copy routine to use this variable as a
result.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: Ie3a48dd54cda1dc152204903d609da3117a0ced9

The the GIC CPU interface should be disabled after cpu off. The
Tegra power management code should mark the connected core as asleep
as part of the CPU off sequence.

This patch disables the GICC after CPU off as a result.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: Ib1a3d8903f5e6d55bd2ee0c16134dbe2562235ea

DCO is not supported by the SKUs released after MIDR_PN4. This
patch skips enabling or disabling the DCO on these SKUs.

Change-Id: Ic31a829de3ae560314d0fb5c5e867689d4ba243b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the BL31_SIZE to the Tegra SoC specific
tegra_def.h. This helps newer platforms configure the size of
the memory available for BL31.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: I43c60b82fa7e43d5b05d87fbe7d673d729380d82

This patch sanity checks the power state type before use,
from the platform's PSCI handler.

Verified with TFTF Standard Test Suite.

Change-Id: Icd45faac6c023d4ce7f3597b698d01b91a218124
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The delay_timer driver for Tegra uses the CNTPS_TVAL_EL1 secure, physical,
decrementing timer as the source. The current logic incorrectly marks this
as an incrementing timer, by negating the timer value.

This patch fixes the anomaly and updates the driver to remove this logic.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: I60490bdcaf0b66bf4553a6de3f4e4e32109017f4

Tegra SoCs would like the flexibility to perform chip specific actions
before we complete cold boot. This patch introduces a platform specific
'runtime_setup' handler to provide that flexibility.

Change-Id: I13b2489f631f775cae6f92acf51a240cd036ef11
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

The SVE CPU extension library reads the id_aa64pfr0_el1 register to
check if SVE is enabled. Tegra platforms disabled ENABLE_SVE_FOR_NS for
pre-8.2 platforms, but this flag can safely be enabled now that the
library can enable the feature at runtime.

This patch updates the makefile to remove "ENABLE_SVE_FOR_NS = 0"
as a result.

Change-Id: Ia2a89ac90644f8c0d39b41d321e04458ff6be6e1
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

This patch introduces support for PN9 variant for some
Denver based platforms.

Original change by: Hemant Nigam <hnigam@nvidia.com>
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>
Change-Id: I331cd3a083721fd1cd1b03f4a11b32fd306a21f3

This patch introduces a macro to declare cpu_op for all Denver
SKUs.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ibcf88c3256fc5dcaa1be855749ebd2c5c396c977

This reduces the scope of these variables and resolves Misra violations
such as:
    bl1/aarch64/bl1_context_mgmt.c:21:[MISRA C-2012 Rule 8.9 (advisory)]
    "bl1_cpu_context" should be defined at block scope.
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: I9b0b26395bce07e10e61d10158c67f9c22ecce44

I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  Tegra194: remove unused tegra_mc_defs header
  Tegra: memctrl: platform setup handler functions
  Tegra194: memctrl: remove streamid security cfg registers
  Tegra194: memctrl: remove streamid override cfg registers
  Tegra: debug prints indicating SC7 entry sequence completion
  Tegra194: add strict checking mode verification
  Tegra194: memctrl: update TZDRAM base at 1MB granularity
  Tegra194: ras: split up RAS error clear SMC call.
  Tegra: platform specific GIC sources
  Tegra194: add memory barriers during DRAM to SysRAM copy
  Tegra: sip: add VPR resize enabled check
  Tegra194: add redundancy checks for MMIO writes
  Tegra: remove unused cortex_a53.h
  Tegra194: report failure to enable dual execution
  Tegra194: verify firewall settings before resource use

* changes:
  fdts: tc0: add support for cpu-idle-states
  fdts: tc0: Add node for mmc

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I542ec3cf1bb929a5656dda6dbad816b69837c646

In the case of Juno AArch32, platform security configuration
gets done from both BL2 and SP_MIN(BL32) components when
JUNO_AARCH32_EL3_RUNTIME and RESET_TO_SP_MIN build options
are set.
Fix is provided to avoid Platform security configuration from
SP_MIN when it is already done in BL2.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I702e91dacb4cdd2d10e339ddeaea91289bef3229

Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830

Created a header file defining the id of the various nv-counters
used in the system.
Also, updated the device tree to add 'id' property for the trusted
and non-trusted nv-counters.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia41a557f7e56ad4ed536aee11c7a59e078ae07c0

Updated the cot-binding documentation to add 'id'
property for the trusted and non-trusted nv-counters.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If1c628c5b90fe403dd96c7cd0cd04f37288c965c

This patch removes the unused header from the Tegra194
platform files. As a result, the TSA MMIO would be
removed from the memory map too.

Change-Id: I2d38b3da7a119f5dfd6cfd429e481f4e6ad3481e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The driver initially contained the setup steps to help Tegra186
and Tegra194 SoCs. In order to support future SoCs and make sure
that the driver remains generic enough, some code should be moved
to SoC.

This patch creates a setup handler for a platform to implement its
initialization sequence.

Change-Id: I8bab7fd07f25e0457ead8e2d2713efe54782a59b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The stream ID security configuration settings shall be done by the
previous level bootloader. This change removes the same settings
from the Tegra194 platform code as a result.

Change-Id: Ia170ca4c2119db8f1d0251f1c193add006f81004
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

The stream ID override configuration is saved during System Suspend
as part MB1 bct. This change removes the same support from the Tegra194
platform code as a result.

Change-Id: I4c19dc0d8b29190908673fb5ed7ed892af8906ab
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>