GitLab

Updated the minor version in the makefile

Change-Id: Ie2b3ce5b36a105a0e2fff52c3740cc9702ca3108
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform.  These secure partitions
have to be managed by Hafnium executing at S-EL2

Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>

Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.

Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Makefile for fiptool already prints verbose line when is (re)building
fiptool, so there is no need to print it also from top level Makefile.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6936a508702f1bf796d17578bb1f043f06365319

The speculation barrier feature (`FEAT_SB`) was introduced with and
made mandatory in the Armv8.5-A extension. It was retroactively made
optional in prior extensions, but the checks in our code-base do not
reflect that, assuming that it is only available in Armv8.5-A or later.

This change introduces the `ENABLE_FEAT_SB` definition, which derives
support for the `sb` instruction in the assembler from the feature
flags passed to it. Note that we assume that if this feature is enabled
then all the cores in the system support it - enabling speculation
barriers for only a subset of the cores is unsupported.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: I978ed38829385b221b10ba56d49b78f4756e20ea

ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0.  This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217

This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.

Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Define ENABLE_FEAT_RNG that describes whether the
armv8.5 FEAT_RNG is supported in this build. This
allows conditional inclusion of code targetting
RNDR and RNDRRS registers.
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
Change-Id: Idd632f8b9bc20ea3d8793f55ead88fa12cb08821

Currently ${FIP_DEPS} as prerequisite for ${BUILD_PLAT}/${FIP_NAME}
contains .PHONY targets check_$(1) and therefore ${BUILD_PLAT}/${FIP_NAME}
is always rebuilt even when other file target prerequisites are not
changed.

These changes fix above issue and ${BUILD_PLAT}/${FIP_NAME} target is
rebuilt only when its prerequisites are changed.

There are 3 changes:

Content of check_$(1) target is moved into check_$(1)_cmd variable so it
can be easily reused.

.PHONY check_$(1) targets are not put into ${FIP_DEPS} and ${FWU_FIP_DEPS}
dependencies anymore and required checks which are in ${CHECK_FIP_CMD} and
${CHECK_FWU_FIP_CMD} variables are executed as part of targets
${BUILD_PLAT}/${FIP_NAME} and ${BUILD_PLAT}/${FWU_FIP_NAME} itself.

To ensure that ${BUILD_PLAT}/${FIP_NAME} and ${BUILD_PLAT}/${FWU_FIP_NAME}
are rebuilt even when additional dependency file image added by
TOOL_ADD_IMG is changed, this file image (if exists) is added as file
dependency to ${FIP_DEPS} and ${FWU_FIP_DEPS}. If it does not exist then
FORCE target is added to ensure that FIP/FWU_FIP is rebuilt. Command
${CHECK_FIP_CMD}/${CHECK_FWU_FIP_CMD} will then thrown an error message if
the file is required but not present.

So this change ensures that if BL33 image is updated then final FIP image
is updated too. And if BL33 image is not specified or does not exist and is
required to be present then check_$(1)_cmd call from ${CHECK_FIP_CMD} would
ensure that error message is thrown during build.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I635cf82e2b667ff57e2af83500d4aca71d235e3e

Only non-file targets should be set a .PHONY. Otherwise if file target is
set as .PHONY then targets which depends on those file .PHONY targets would
be always rebuilt even when their prerequisites are not changed.

File target which needs to be always rebuilt can be specified in Make
system via having a prerequisite on some .PHONY target, instead of marking
whole target as .PHONY. In Makefile projects it is common to create empty
.PHONY target named FORCE for this purpose.

This patch changes all file targets which are set as .PHONY to depends on
new .PHONY target FORCE, to ensure that these file targets are always
rebuilt (as before). Basically they are those targets which calls external
make subprocess.

After FORCE target is specified in main Makefile, remove it from other
Makefile files to prevent duplicate definitions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee3b4e0de93879b95eb29a1745a041538412e69e

If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.

If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.

This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e

This patch adds a new ARM_ARCH_FEATURE build option
to add support for compiler's feature modifiers.
It has the form '[no]feature+...' and defaults to
'none'. This option translates into compiler option
'-march=armvX[.Y]-a+[no]feature+...'.

Change-Id: I37742f270a898f5d6968e146cbcc04cbf53ef2ad
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Updated the minor version to '4' to indicate 2.4 release

Change-Id: Ib142fa15baeb43025fae371c7649199b8121c18f
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Include EL2 registers related to Nested Virtualization in EL2 context
save/restore routines if architecture supports it and platform wants to
use these features in Secure world.

Change-Id: If006ab83bbc2576488686f5ffdff88b91adced5c
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Removed unused macro AARCH32 and AARCH64 from makefile

Change-Id: I6729e300f18d66dd7c6978d3bbd5a88937839c31
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Removed '__ASSEMBLY__' deprecated macro from TF-A code

Change-Id: I9082a568b695acb5b903f509db11c8672b62d9d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Loop macros make it easier for developers to include new variables to
assert or define and also help code code readability on makefiles.

Change-Id: I0d21d6e67b3eca8976c4d856ac8ccc02c8bb5ffa
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>

Although support for building fiptool on a Windows host was present,
the binary was not built when the top level makefile was invoked.

This patch makes the necessary changes to the to support building of
fiptool on a Windows host PC from the main makefile.

Change-Id: I0c01ba237fa3010a027a1b324201131210cf4d7c
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

Currently, the tool's makefile override the tool's binary name
which is already been defined in the main makefile.
Hence fix is provided so that the tool's makefile get the tool's
binary name from the main makefile instead of overriding it.

Change-Id: I8af2bd391a96bba2dbcddef711338a94ebf5f038
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.

This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.

Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

With recently introduced dualroot CoT for SPs where they are owned
either by SiP or by Platform. SiP owned SPs index starts at SP_PKG1_ID
while Plat owned SPs index starts at SP_PKG5_ID.

This patch modifies SP makefile generator script to take CoT as an
argument and if it is "dualroot" then generates SP_PKG in order
mentioned above, otherwise generates it sequentially.
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: Iffad1131787be650a9462f6f8cc09b603cddb3b8

If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.

This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8

Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.

Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb

Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.

Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.

Also, updated the document for this newly created build option

Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Added a build option 'COT_DESC_IN_DTB' to create chain of trust
at runtime using fconf.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92b257ac4ece8bbf56f05a41d1e4056e2422ab89

The TF-A firmware build system is capable of building on both Unix like
and Windows host PCs. The commit ID 7ff088 "Enable MTE support" updated
the Makefile to conditionally enable the MTE support if the AArch64
architecture revision was greater than 8.5. However, the Makefile changes
were dependent on shell commands that are only available on unix shells,
resulting in build failures on a Windows host PC.

This patch fixes the Makefile by using a more portable approach for
comparing the architecture revision.

Change-Id: Icb56cbecd8af5b0b9056d105970ff4a6edd1755a
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

This patch adds BRANCH_PROTECTION = 4 'bti' build option
which turns on branch target identification mechanism.

Change-Id: I32464a6b51726a100519f449a95aea5331f0e82d
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds a build config 'RAS_TRAP_LOWER_EL_ERR_ACCESS' to set
SCR_EL3.TERR during CPU boot. This bit enables trapping RAS register
accesses from EL1 or EL2 to EL3.

RAS_TRAP_LOWER_EL_ERR_ACCESS is disabled by default.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifb0fb0afedea7dd2a29a0b0491a1161ecd241438

Using the fconf framework, the Group 0 and Group 1 secure interrupt
descriptors are moved to device tree and retrieved in runtime. This
feature is enabled by the build flag SEC_INT_DESC_IN_FCONF.

Change-Id: I360c63a83286c7ecc2426cd1ff1b4746d61e633c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

To support secure boot of SP's update cert tool arguments while
generating sp_gen.mk which in turn is consumed by build system.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I2293cee9b7c684c27d387aba18e0294c701fb1cc

This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.

Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.

Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
   bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
   system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)

Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924

More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html



Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0

Signed-off-by: Peiyuan Song <squallatf@gmail.com>
Change-Id: I97c2e6f8c12ecf828605811019d47a24293c1ebb

Change-Id: I27f7d92988fc16f68041c2ddaa8dd3a60362ddd1
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Commit d5e97a1d ("Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3
globally for C files") does not have commit 848a7e8c ("Build:
introduce per-BL CPPFLAGS and ASFLAGS") as an ancestor because
they were pulled almost at the same time.

This is a follow-up conversion to be consistent with commit
11a3c5ee

 ("plat: pass -D option to BL*_CPPFLAGS instead of
BL*_CFLAGS").

With this change, the command line option, IMAGE_AT_EL3, will be
passed to .S files as well.

I remove the definition in include/lib/cpus/aarch64/cpu_macros.S

Otherwise, the following error would happen.

  include/lib/cpus/aarch64/cpu_macros.S:29:0: error: "IMAGE_AT_EL3" redefined [-Werror]

Change-Id: I943c8f22356483c2ae3c57b515c69243a8fa6889
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add Crypto 713 support as crypto module and NVM counter provider.

As files under include/drivers/arm/cryptocell/713/ are copied verbatim
from the CryptoCell SBROM lib project they are filtered from checkpatch
coding style check.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Change-Id: I7c361772f00ca7d96481f81ac6cbb2704467e52c

Enable MTE support by adding memory tag option in Makefile
This option is available only when ARMv8.5-MemTag is implemented

MTE options are added in latest clang and armclang compiler which
support below options:
for clang <version 11.0.0>
1. -march=arm8.5-a+memtag
2. -fsanitize=memtag

for armclang <version 6.12>
1. -march=arm8.5-a+memtag
2. -mmemtag-stack

Set the option SUPPORT_STACK_MEMTAG=yes to enable memory stack tagging.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4e0bbde4e9769ce03ead6f550158e22f32c1c413

Unless specified in the environment, $(CC) expands to some generic
host C compiler like cc or c99. We set our own value for $(CC), but
only few lines later.

Move the first use of the $(CC) variable behind the definition to
correct this.

Change-Id: I45344e063d21ddfe22b7ad77954e85c1c46087bd
Fixes: 1684b873

 ("Use clang assembler when clang compiler is used")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

The build system defines the IMAGE_BL* macro when compiling each image.
This is useful to distinguish which image the current file is being
built for by using #if defined(IMAGE_BL2) or #if defined(IMAGE_BL31),
or whatever.

There are some cases where we are more interested in which exception
level the current file is being built for.

include/lib/cpus/{aarch32,aarch64}/cpu_macros.S defines IMAGE_AT_EL3,
but we do not have it globally.

Pass IMAGE_AT_EL1 or IMAGE_AT_EL3 to BL*_CFLAGS so that it is available
from all C code.

The library code (libc.a, libmbedtls.a, etc.) is exceptional cases,
where the code can be shared between BL images.

Other than that, we know the exception level at the build time, and
this macro will be useful in the shared code.

Change-Id: I7c8a1da10726906adfba981cfe8464dff111d6b0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch provides support for measured boot by adding calculation
of BL2 image hash in BL1 and writing these data in TB_FW_CONFIG DTB.

Change-Id: Ic074a7ed19b14956719c271c805b35d147b7cec1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>