GitLab

The code managing the console is the same for all the platforms
currently supported. Since it is unlikely to change in the future move
the code to an external file in the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I6df555ea82d483b4f08a4a1e2cb0a7488fbaa015

Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673

As part of the code refactoring fix the order of the include files
across all the source files.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice72f687cc26ee881a9051168149467688100cfb

Make the header guards more generic and contextually remove the
GXBB_BL31_PLAT_PARAM_VAL value that is unused on the GXL platform.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I842fa2e084e71280ae17b39c67877e844821a171

This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.

The full support relies on ubsan.c which has been adapted from code used
by OPTEE.

Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

Common ipi_table needs to be initialized before using any
IPI command (i.e send/receive). Move zynqmp ipi config table
initialization from sip_svc_setup() to zynqmp_config_setup().

Change-Id: Ic8aaa0728a43936cd4c6e1ed590e01ba8f0fbf5b
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>

Remove the GXBB prefix where needed and add SoC specific prefixes for
GXBB/GXL.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic3eb3a77ca2d9c779a9dee5cee786e9c16ecdb27

Remove the GXBB prefix from the code in the common directory and add
SoC-specific prefixes in the SoC specific code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic983ef70b0ef23f95088dd8df488d8c42c3bc030

Add a new aml_* prefix to the SCPI related function calls.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I697812ac1c0df28cbb639a1dc3e838f1107fb739

Make the MHU code AML specific adding a new aml_* prefix and remove the
GXBB prefix from the register names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I8f20918e29f08542bd71bd679f88e65b4efaa7d2

All the SIP/SVC related code is currently the same between GXL and GXBB.
Rename function names and register names to avoid hardcoding the GXBB
prefix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I7e58ab68489df8d4762663fc01fb64e6899cc8bf

No need to have a special SoC-specific prefix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I0da543e7d92d56604e79440a98027ffd9a2eaa59

The header file is shared between all the SoCs. Better avoiding
hardcoding the SoC name in the function names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I9074871bd1ed8a702c1a656e0f50f2d3c6cb0425

The efuse driver is hardcoding the GXBB prefix. No need to do that since
the driver is shared between multiple SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I97691b0bbd55170d8216d301a3fc04feb8c2af2e

Fixing at the same time the related register names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ib1130d50abe6088f1c0826878d1ae454a0f23008

The code is the common directory is now generic, no need to have the SoC
prefix hardcoded in the function names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ied3a5e506b9abd4c2d6f893bafef50019bff24f1

Now that every piece is in place, the makefiles can be refactored and
slightly beautified removing useless and redundant parts.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: If74e1909df52d475cf4b0dfed819d07d3a4c85b9

The code is the same between GXBB and GXL. Move it to the common source
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I875689a6fd029971aa755fc2725217e90ed06b6c

As done already for multiple files, move the topology file to the common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaca357a089593ad58c35c05c929239132249dcda

As for most of the Amlogic code, this is common between the Amlogic
SoCs. Move the code to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Id3f0073ff1f0b9ddbe964f80303323ee4a2f27b0

The MHU code is shared between all the supported platforms. Move it to
the common directory instead.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaf53122866eae85c13f772927d16836dcfa877a3

The efuse code is the same between GXL and GXBB. Move the code to common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ie37f21d1907a36292724f1fb645a78041fe4a6b3

The platform macros are shared between all the SoCs. Move it to common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ia04c3ffe4d7b068aa701268ed99f69995d8db92b

Now that also the SHA256 DMA driver is shared between all the SoCs, we
can have one single private platform header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I77d51915f9d8233aeceeed66ed1f491573402cfc

The SCPI code is the same between GXBB and GXL. No need to have it
replicated for each SoCs. Move it to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I7e416caf1e9538b3ce7702c0363ee00a054e2451

The SHA256 DMA driver can be used by multiple SoCs. Move it to the
common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I96319eeeeeebd503ef0dcb07c0e4ff6a67afeaa5

The assembly helpers are common to all the amlogic SoCs. Move the .S
file to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I0d8616a7ae22dbcb14848cefd0149b6bb5814ea6

Make the platform name a parameter for the source directories. Besides a
cosmetic fix, this is going to be helpful when reusing the same Makefile
for different SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I307897a21800cca8ad68a5ab8972d27e9356ff2a

Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d

This console driver sends '\r' before 'n', not after.
It works, but the convention is "\r\n" (i.e. CRLF)

Instead of fixing it in the driver, set CONSOLE_FLAG_TRANSLATE_CRLF
to leave it to the framework.

Change-Id: I2154e29313739a40dff70cfb5c0f8989136d4ad2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.

Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The runtime console is only kept in DEBUG configuration.

Change-Id: I0447dfcacb9a63a12bcdab7c55584d70c3220e5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This change enhances performance and security in BL32 stage.

Change-Id: I64df5995fc6b04f6cf42d6a00a6d3d0f602b5407
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This change enables LpDDR3 initialization with PMIC.

Change-Id: I2409a808335dfacd69a8517cb8510cee98bb8161
Signed-off-by: Yann Gautier <yann.gautier@st.com>

To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.

Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single
Cortex-A7.

Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.

Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

This information is located in DBGMCU registers.

Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.

The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.

An increase of BL2 size is also required when adding this new code.

Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

The ddr_a and ddr_b register macros are the same for the most part,
unify them into a single header.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I8f55d6d779837215339ac0010e8c8ab5f6748d75