GitLab

Replace macro ASM_ASSERTION with macro ENABLE_ASSERTIONS

Fix issues for AArch32 builds on ARM platforms

The bl2_early_platform_setup() and bl2_platform_setup() were
redefined for Juno AArch32 eventhough CSS platform layer had
same definition for them. The CSS definitions definitions were
previously restricted to EL3_PAYLOAD_BASE builds and this is now
modified to include the Juno AArch32 builds as well thus
allowing us to remove the duplicate definitions in Juno platform
layer.

Change-Id: Ibd1d8c1428cc1d51ac0ba90f19f5208ff3278ab5
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch fixes a couple of issues for AArch32 builds on ARM reference
platforms :

1. The arm_def.h previously defined the same BL32_BASE value for AArch64 and
   AArch32 build. Since BL31 is not present in AArch32 mode, this meant that
   the BL31 memory is empty when built for AArch32. Hence this patch allocates
   BL32 to the memory region occupied by BL31 for AArch32 builds.

   As a side-effect of this change, the ARM_TSP_RAM_LOCATION macro cannot
   be used to control the load address of BL32 in AArch32 mode which was
   never the intention of the macro anyway.

2. A static assert is added to sp_min linker script to check that the progbits
   are within the bounds expected when overlaid with other images.

3. Fix specifying `SPD` when building Juno for AArch32 mode. Due to the quirks
   involved when building Juno for AArch32 mode, the build option SPD needed to
   specifed. This patch corrects this and also updates the documentation in the
   user-guide.

4. Exclude BL31 from the build and FIP when building Juno for AArch32 mode. As
   a result the previous assumption that BL31 must be always present is removed
   and the certificates for BL31 is only generated if `NEED_BL31` is defined.

Change-Id: I1c39bbc0abd2be8fbe9f2dea2e9cb4e3e3e436a8
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Add support for Activity Monitors

The `ENABLE_AMU` build option can be used to enable the
architecturally defined AMU counters.  At present, there is no support
for the auxiliary counter group.

Change-Id: Ifc7532ef836f83e629f2a146739ab61e75c4abc8
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

The `ENABLE_AMU` build option can be used to enable the
architecturally defined AMU counters.  At present, there is no support
for the auxiliary counter group.

Change-Id: I7ea0c0a00327f463199d1b0a481f01dadb09d312
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Change-Id: I96de88f44c36681ad8a70430af8e01016394bd14
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

The Cortex A75 has 5 AMU counters.  The first three counters are fixed
and the remaining two are programmable.

A new build option is introduced, `ENABLE_AMU`.  When set, the fixed
counters will be enabled for use by lower ELs.  The programmable
counters are currently disabled.

Change-Id: I4bd5208799bb9ed7d2596e8b0bfc87abbbe18740
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Fix Makefile for ARMv8-A AArch32 builds

Commit 26e63c44

 broke the Makefile for ARMv8-A AArch32 platforms.
This patch fixes it.

Change-Id: I49b8eb5b88f3a131aa4c8642ef970e92d90b6dd2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

SPM fixes

Support ARMv7 architectures

Flush the affinity data in psci_affinity_info

This patch replaces the macro ASM_ASSERTION with the macro
ENABLE_ASSERTIONS in ARM Cortex-A53/57/72 MPCore Processor
related files. There is build error when ASM_ASSERTION is set
to 1 and ENABLE_ASSERTIONS is set to 0 because function
asm_assert in common/aarch32/debug.S is defined in the macro
ENABLE_ASSERTIONS but is called with the macro ASM_ASSERTION.

There is also the indication to use ENABLE_ASSERTIONS but not
ASM_ASSERTION in the Makefile.
Signed-off-by: Matt Ma <matt.ma@spreadtrum.com>

Add ARMv8.2 ID_AA64MMFR0_EL1.PARange value

Add support sha512 for hash algorithm

SDEI fixes

Move SPE code to lib/extensions

The flag support the following values:
    - sha256 (default)
    - sha384
    - sha512

Change-Id: I7a49d858c361e993949cf6ada0a86575c3291066
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

This option enables the user to select the secure hash algorithm
to be used for generating the hash. It supports the following
options:
    - sha256 (default)
    - sha384
    - sha512

Change-Id: Icb093cec1b5715e248c3d1c3749a2479a7ab4b89
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

There is an edge case where the cache maintaince done in
psci_do_cpu_off may not seen by some cores. This case is handled in
psci_cpu_on_start but it hasn't handled in psci_affinity_info.

Change-Id: I4d64f3d1ca9528e364aea8d04e2d254f201e1702
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Factor out SPE operations in a separate file.  Use the publish
subscribe framework to drain the SPE buffers before entering secure
world.  Additionally, enable SPE before entering normal world.

A side effect of this change is that the profiling buffers are now
only drained when a transition from normal world to secure world
happens.  Previously they were drained also on return from secure
world, which is unnecessary as SPE is not supported in S-EL1.

Change-Id: I17582c689b4b525770dbb6db098b3a0b5777b70a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

It is not possible to detect at compile-time whether support for an
optional extension such as SPE should be enabled based on the
ARM_ARCH_MINOR build option value.  Therefore SPE is now enabled by
default.

Change-Id: I670db164366aa78a7095de70a0962f7c0328ab7c
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Factor out extension enabling to a separate function that is called
before exiting from EL3 for first entry into Non-secure world.

Change-Id: Ic21401ebba531134d08643c0a1ca9de0fc590a1b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

The explicit event dispatch sequence currently depicts handling done in
Secure EL1, although further error handling is typically done inside a
Secure Partition. Clarify the sequence diagram to that effect.

Change-Id: I53deedc6d5ee0706626890067950c2c541a62c78
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The SDEI specification requires that binding a client interrupt
dispatches SDEI Normal priority event. This means that dynamic events
can't have Critical priority. Add asserts for this.

Change-Id: I0bdd9e0e642fb2b61810cb9f4cbfbd35bba521d1
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Register count is currently declared as unsigned, where as there are
asserts in place to check it being negative during unregister. These are
flagged as never being true.

Change-Id: I34f00f0ac5bf88205791e9c1298a175dababe7c8
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Change-Id: Ic381ab5d03ec68c7f6e8d357ac2e2cbf0cc6b2e8
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Move FPEXC32_EL2 to FP Context

If an implementation of ARMv8.2 includes ARMv8.2-LPA, the value 0b0110
is permitted in ID_AA64MMFR0_EL1.PARange, which means that the Physical
Address range supported is 52 bits (4 PiB). It is a reserved value
otherwise.

Change-Id: Ie0147218e9650aa09f0034a9ee03c1cca8db908a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The FPEXC32_EL2 register controls SIMD and FP functionality when the
lower ELs are executing in AArch32 mode. It is architecturally mapped
to AArch32 system register FPEXC.

This patch removes FPEXC32_EL2 register from the System Register context
and adds it to the floating-point context. EL3 only saves / restores the
floating-point context if the build option CTX_INCLUDE_FPREGS is set to 1.

The rationale for this change is that if the Secure world is using FP
functionality and EL3 is not managing the FP context, then the Secure
world will save / restore the appropriate FP registers.

NOTE - this is a break in behaviour in the unlikely case that
CTX_INCLUDE_FPREGS is set to 0 and the platform contains an AArch32
Secure Payload that modifies FPEXC, but does not save and restore
this register

Change-Id: Iab80abcbfe302752d52b323b4abcc334b585c184
Signed-off-by: David Cunado <david.cunado@arm.com>

The parameters passed to the Secure world from the Secure Partition
Manager when invoking SP_COMMUNICATE_AARCH32/64 were incorrect, as well
as the checks done on them.

Change-Id: I26e8c80cad0b83437db7aaada3d0d9add1c53a78
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The code was incorrectly reading from ID_AA64PRF0_EL1 instead of
ID_AA64MMFR0_EL1 causing the supported granularity sizes returned by the
code to be wrong.

This wasn't causing any problem because it's just used to check the
alignment of the base of the buffer shared between Non-secure and Secure
worlds, and it was aligned to more than 64 KiB, which is the maximum
granularity supported by the architecture.

Change-Id: Icc0d949d9521cc0ef13afb753825c475ea62d462
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SDEI: Fix build error with logging enabled

Change-Id: Iee617a3528225349b6eede2f8abb26da96640678
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

EHF and SDEI

The document includes SDEI sequence diagrams that are generated using
PlantUML [1].

A shell script is introduced to generate SVG files from PlantUML files
supplied in arguments.

[1] http://plantuml.com/PlantUML_Language_Reference_Guide.pdf



Change-Id: I433897856810bf1927f2800a7b2b1d81827c69b2
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This allows for other EL3 components to schedule an SDEI event dispatch
to Normal world upon the next ERET. The API usage constrains are set out
in the SDEI dispatcher documentation.

Documentation to follow.

Change-Id: Id534bae0fd85afc94523490098c81f85c4e8f019
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Support SDEI on ARM platforms using frameworks implemented in earlier
patches by defining and exporting SDEI events: this patch defines the
standard event 0, and a handful of shared and private dynamic events.

Change-Id: I9d3d92a92cff646b8cc55eabda78e140deaa24e1
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>