Skip to content

GitLab

Switch branch/tag
  1. 08 Jun, 2017 1 commit
    • Lin Huang's avatar
      rockchip/rk3399: fix DRAM gate training issue · a9059b96
      Lin Huang authored 
      

The differential signal of DQS need keep low level
before gate training. It need enable RPULL and disable
PHY side ODT to ensure it when do gate training.
But it can not access the PHY registers to do it when
perform DFS.So the workaroud as below: It is ensure that
the PHY's read gate is landing somewhere in the incoming
DQS's pulses before it starts searching for pre-amble window.
It need get the rddqs_delay_ps to calculate the start point
of gate training for DFS.

Change-Id: I79eabcf4ec9a9c8f4539f68a51f22afba49c72fe
Signed-off-by: default avatarLin Huang <hl@rock-chips.com>
      a9059b96
  3. 05 Jun, 2017 2 commits
    • Soby Mathew's avatar
      Add SCMI support for Juno platform · 40111d44
      Soby Mathew authored 
      

This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.

Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      40111d44
    • Soby Mathew's avatar
      CSS: Add SCMI driver for SCP · c04a3b6c
      Soby Mathew authored 
      

This patch adds the SCMI driver for communicating with SCP. The power
domain management and system power management protocol of the SCMI
specification[1] is implemented in the driver. The SCP power management
abstraction layer for SCMI for CSS power management is also added.

A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
driver over SCPI.

[1] ARM System Control and Management Interface v1.0 (SCMI)
Document number: ARM DEN 0056A

Change-Id: I67265615a17e679a2afe810b9b0043711ba09dbb
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      c04a3b6c
  5. 01 Jun, 2017 2 commits
    • Jeenu Viswambharan's avatar
      Introduce ARM GIC-600 driver · e1c59ab3
      Jeenu Viswambharan authored 
      

ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
implements a power control register in the Redistributor frame. This
register must be programmed to mark the frame as powered on, before
accessing other registers in the frame. Rest of initialization sequence
remains the same.

The driver provides APIs for Redistributor power management, and
overrides those in the generic GICv3 driver. The driver data is shared
between generic GICv3 driver and that of GIC-600.

For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
is set to FVP_GIC600. Also update user guide.

Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      e1c59ab3
    • David Wang's avatar
      Add support for Cortex-A75 and Cortex-A55 CPUs · d40ab484
      David Wang authored 
      

Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.

Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      d40ab484
  7. 31 May, 2017 4 commits
  9. 24 May, 2017 8 commits
  11. 23 May, 2017 2 commits
    • Masahiro Yamada's avatar
      FVP,Juno: switch FVP and Juno to use generic TBBR OID header · 232c6b34
      Masahiro Yamada authored 
      

The header tbbr_oid.h contains OIDs obtained by ARM Ltd.
so there is no good reason to use platform_oid.h
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      232c6b34
    • Masahiro Yamada's avatar
      cert: move platform_oid.h to include/tools_share for all platforms · bb41eb7a
      Masahiro Yamada authored 
      

Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).

For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd.  This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.

The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h

Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1.  USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      bb41eb7a
  13. 16 May, 2017 1 commit
  15. 15 May, 2017 3 commits
  17. 12 May, 2017 3 commits
  19. 11 May, 2017 1 commit
  21. 10 May, 2017 3 commits
  23. 04 May, 2017 1 commit
    • Jeenu Viswambharan's avatar
      Introduce ARM SiP service to switch execution state · b10d4499
      Jeenu Viswambharan authored 
      

In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether the lower exception level executes in AArch64 or AArch32 state.
For an exception level to have its execution state changed at run time,
it must request the change by raising a synchronous exception to the
higher exception level.

This patch implements and adds such a provision to the ARM SiP service,
by which an immediate lower exception level can request to switch its
execution state. The execution state is switched if the request is:

  - raised from non-secure world;

  - raised on the primary CPU, before any secondaries are brought online
    with CPU_ON PSCI call;

  - raised from an exception level immediately below EL3: EL2, if
    implemented; otherwise NS EL1.

If successful, the SMC doesn't return to the caller, but to the entry
point supplied with the call. Otherwise, the caller will observe the SMC
returning with STATE_SW_E_DENIED code. If ARM Trusted Firmware is built
for AArch32, the feature is not supported, and the call will always
fail.

For the ARM SiP service:

  - Add SMC function IDs for both AArch32 and AArch64;
  - Increment the SiP service minor version to 2;
  - Adjust the number of supported SiP service calls.

Add documentation for ARM SiP service.

Fixes ARM-software/tf-issues#436

Change-Id: I4347f2d6232e69fbfbe333b340fcd0caed0a4cea
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      b10d4499
  25. 03 May, 2017 1 commit
  27. 02 May, 2017 1 commit
  29. 01 May, 2017 7 commits