Skip to content

GitLab

Switch branch/tag
  1. 17 Jun, 2019 29 commits
  3. 13 Jun, 2019 1 commit
  5. 05 Jun, 2019 1 commit
    • James kung's avatar
      Prevent pending G1S interrupt become G0 interrupt · acc29852
      James kung authored 
      
According to Arm GIC spec(IHI0069E, section 4.6.1),
when GICD_CTLR.DS == 0, Secure Group 1 interrupts
are treated as Group 0 by a CPU interface if:
- The PE does not implement EL3.
- ICC_SRE_EL1(S).SRE == 0

When a cpu enter suspend or deep idle, it might be
powered off. When the cpu resume, according to
the GIC spec(IHI0069E, section 9.2.15, 9.2.16 and
9.2.22) the ICC_SRE_EL1.SRE reset value is 0 (if
write is allowed) and G0/G1S/G1NS interrupt of the
GIC cpu interface are all disabled.

If a G1S SPI interrupt occurred and the target cpu
of the SPI is assigned to a specific cpu which is
in suspend and is powered off, when the cpu resume
and start to initial the GIC cpu interface, the
initial sequence might affect the interrupt group
type of the pending interrupt on the cpu interface.

Current initial sequence on the cpu interface is:
1. Enable G0 interrupt
2. Enable G1S interrupt
3. Enable ICC_SRE_EL1(S).SRE

It is possible to treat the pending G1S interrupt
as G0 interrupt on the cpu interface if the G1S
SPI interrupt occurred between step2 and step3.

To prevent the above situation happend, the initial
sequence should be changed as follows:
1. Enable ICC_SRE_EL1(S).SRE
2. Enable G0 interrupt
3. Enable G1S interrupt

Change-Id: Ie34f6e0b32eb9a1677ff72571fd4bfdb5cae25b0
Signed-off-by: default avatarJames Kung <kong1191@gmail.com>
      acc29852
  7. 23 May, 2019 1 commit
  9. 21 May, 2019 1 commit
  11. 14 May, 2019 1 commit
  13. 10 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: Abort DMA transactions · 1461ad9f
      Alexei Fedorov authored 
      
For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.

Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      1461ad9f
  15. 03 May, 2019 1 commit
    • Alexei Fedorov's avatar
      SMMUv3: refactor the driver code · ccd4d475
      Alexei Fedorov authored 
      
This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.

Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      ccd4d475
  17. 25 Apr, 2019 1 commit
  19. 24 Apr, 2019 1 commit
  21. 17 Apr, 2019 1 commit
  23. 12 Apr, 2019 1 commit
    • Ambroise Vincent's avatar
      Mbed TLS: Remove weak heap implementation · 2374ab17
      Ambroise Vincent authored 
      
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.

The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.

Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
      2374ab17