GitLab

This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.

Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

* changes:
  ti: k3: drivers: ti_sci: Put sequence number in coherent memory
  ti: k3: drivers: ti_sci: Remove indirect structure of const data
  ti: k3: common: Enable ARM cluster power down
  ti: k3: common: Rename device IDs to be more consistent

This patch enables the config to switch to the console provided
by the SPE firmware.

Change-Id: I5a3bed09ee1e84f958d0925501d1a79fb7f694de
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The current message sequence number is accessed both with caches on and
off so put this memory in the un-cached coherent section so accesses
are consistent and coherency is maintained.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Ieeefefeaffc691e4e4c4de7c74490d50ff9de807

The 'info' structure contained what is only static data for this
implementation of TI-SCI. Remove this indirection and remove the
struct.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I2328fddf388bf7d56a56bd673c080e78c86fe072

When all cores in a cluster are powered down the parent cluster can
be also powered down. When the last core has requested powering down
follow by sending the cluster power down sequence to the system
power controller firmware.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I0ffeb339852c66ef62743aecd3e17ca20bad6216

The core number is called 'core_id' but the processor and device IDs are
called 'proc' and 'device'. Rename these to make them less confusing.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I3d7c6dddd7aa37b5dee1aa9689ce31730e9c3b59

* changes:
  uniphier: make all BL images completely position-independent
  uniphier: make uniphier_mmap_setup() work with PIE
  uniphier: pass SCP base address as a function parameter
  uniphier: set buffer offset and length for io_block dynamically
  uniphier: use more mmap_add_dynamic_region() for loading images
  bl_common: add BL_END macro
  uniphier: turn on ENABLE_PIE
  TSP: add PIE support
  BL2_AT_EL3: add PIE support
  BL31: discard .dynsym .dynstr .hash sections to make ENABLE_PIE work
  PIE: pass PIE options only to BL31
  Build: support per-BL LDFLAGS

CPUECTLR_EL1.EXTLLC bit indicates the presense of internal or external
last level cache(LLC) in the system, the reset value is internal LLC.

To cater for the platforms(like N1SDP) which has external LLC present
introduce a new build option 'NEOVERSE_N1_EXTERNAL_LLC' which can be
enabled by platform port.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ibf475fcd6fd44401897a71600f4eafe989921363

The platform topology description of the upcoming Arm's RD platforms
have different topology than those listed in the sgi_topology.c file. So
instead of adding platform specific topology into existing
sgi_topology.c file, those can be added to respective board files. In
order to maintain consistency with the upcoming platforms, move the
existing platform topology description to respective board files.

Change-Id: I4689c7d24cd0c75a3dc234370c34a85c08598abb
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

As on SGI platforms, SCPI is unsupported on SGM platforms.

Change-Id: I556ed095b9eb55b72447230ee2725d3c76160a08
Signed-off-by: Chris Kay <chris.kay@arm.com>

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I76f5535f1cbdaf3fc1235cd824111d9afe8f7e1b

This platform supports multiple SoCs. The next SoC will still keep
quite similar architecture, but the memory base will be changed.

The ENABLE_PIE improves the maintainability and usability. You can reuse
a single set of BL images for other SoC/board without re-compiling TF-A
at all. This will also keep the code cleaner because it avoids #ifdef
around various base addresses.

By defining ENABLE_PIE, BL2_AT_EL3, BL31, and BL32 (TSP) are really
position-independent now. You can load them anywhere irrespective of
their link address.

Change-Id: I8d5e3124ee30012f5b3bfa278b0baff8efd2fff7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

BL2_BASE, BL31_BASE, and BL32_BASE are defined in platform_def.h,
that is, determined at link-time.

On the other hand, BL2_END, BL31_END, and BL32_END are derived from
the symbols produced by the linker scripts. So, they are fixed-up
at run-time if ENABLE_PIE is enabled.

To make it work in a position-indepenent manner, use BL_CODE_BASE and
BL_END, both of which are relocatable.

Change-Id: Ic179a7c60eb64c5f3024b178690b3ac7cbd7521b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, UNIPHIER_SCP_BASE is hard-coded in uniphier_scp_start(),
which is not handy for PIE.

Towards the goal of making this really position-independent, pass in
image_info->image_base.

Change-Id: I88e020a1919c607b1d5ce70b116201d95773bb63
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the .buffer field in io_block_dev_spec is statically set,
which is not handy for PIE.

Towards the goal of making this really position-independent, set the
buffer length and length in the uniphier_io_block_setup() function.

Change-Id: I22b20d7b58d6ffd38f64f967a2820fca4bd7dade
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, uniphier_bl2_mmap hard-codes the memory region needed for
loading other images.

Towards the goal of making this really position-independent, call
mmap_add_dynamic_region() before that region gets accessed.

Change-Id: Ieb505b91ccf2483e5f1a280accda564b33f19f11
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the end address macros are defined per BL, like BL2_END,
BL31_END, BL32_END. They are not handy in the common code shared
between multiple BL stages.

This commit introduces BL_END, which is equivalent to BL{2,31,32}_END,
and will be useful for the BL-common code.

Change-Id: I3c39bf6096d99ce920a5b9fa21c0f65456fbfe8a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Now that various issues in the PIE support have been fixed,
this platform can enable ENABLE_PIE.

I tested BL2_AT_EL3, BL31, TSP, and all of them worked.

Change-Id: Ibc499c6bad30b7f81a42bfa7e435ce25f820bd9c
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This implementation simply mimics that of BL31.

Change-Id: Ibbaa4ca012d38ac211c52b0b3e97449947160e07
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This implementation simply mimics that of BL31.

I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case.
It would make the linker script a bit uglier.

Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

When I tried ENABLE_PIE for my PLAT=uniphier platform, BL31 crashed
at its entry. When it is built with ENABLE_PIE=1, some sections are
inserted before the executable code.

$ make PLAT=uniphier CROSS_COMPILE=aarch64-linux-gnu- ENABLE_PIE=1 bl31
$ aarch64-linux-gnu-objdump -h build/uniphier/release/bl31/bl31.elf | head -n 13

build/uniphier/release/bl31/bl31.elf:     file format elf64-littleaarch64

Sections:
Idx Name          Size      VMA               LMA               File off  Algn
  0 .dynsym       000002a0  0000000081000000  0000000081000000  00010000  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  1 .dynstr       000002a0  00000000810002a0  00000000810002a0  000102a0  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  2 .hash         00000124  0000000081000540  0000000081000540  00010540  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  3 ro            0000699c  0000000081000664  0000000081000664  00010664  2**11
                  CONTENTS, ALLOC, LOAD, CODE

The previous stage loader generally jumps over to the base address of
BL31, where no valid instruction exists.

I checked the linker script of Linux (arch/arm64/kernel/vmlinux.lds.S)
and U-Boot (arch/arm/cpu/armv8/u-boot.lds), both of which support
relocation. They simply discard those sections.

Do similar in TF-A too.

Change-Id: I6c33e9143856765d4ffa24f3924b0ab51a17cde9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

docs/getting_started/build-options.rst clearly says ENABLE_PIE is
currently only supported in BL31, but in fact, it has a stronger
limitation:

  Defining ENABLE_PIE may corrupt BL1 and BL2. So, ENABLE_PIE is
  supported only for platforms where BL31 is the only image built
  in the TF-A tree.

Currently, ENABLE_PIE is enabled by two platforms,
plat/arm/common/arm_common.mk and ti/k3/common/plat_common.mk,
both of which enable ENABLE_PIE together with RESET_TO_BL31.

For platforms with the full boot sequence, ENABLE_PIE may break earlier
BL stages. For example, if I build PLAT=qemu with ENABLE_PIE=1, it
fails in BL1.

When ENABLE_PIE is enabled, PIE options are added to TF_CFLAGS and
TF_LDFLAGS, so all BL images are affected. It is problematic because
currently only the BL31 linker script handles it. Even if BL1/BL2
works, the image size would increase needlessly, at least.

Pass the PIE options only to BL images that support it.

Change-Id: I550e95148aa3c63571c8ad2081082c554a848f57
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

make_helpers/build_macros.mk supports per-BL CFLAGS. For example,
you can pass compiler flags only to BL31 by using BL31_CFLAGS.

This commit adds per-BL LDFLAGS support, which is useful as well.

My main motivation of this addition is to use it for ENABLE_PIE.
When ENABLE_PIE is enabled, some linker flags are added to TF_LDFLAGS,
which affects all the TF images. It will make more sense to pass the
relevant options only to BL images that support it.

Change-Id: I203acaab0091db5ae0ea6e66460ee7dc8d9c4d75
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ia7072d82116b03904c1b3982f37d96347203e621

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I3421336230981d4cda301fa2cef24b94b08353b1

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib9f97be1972405e54dc9550266f5b8a6a55b93bf

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I460b35f5a4ec47b13d4e811bb20881ce314e9259

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Iad91e99e9d13254de23eb10e5f655253f253cf0d